Results 1 to 5 of 5

Thread: How do I enable touchpad-tapping?

  1. #1
    Junior Member
    Join Date
    Sep 2010
    Posts
    8

    How do I enable touchpad-tapping?

    Hello everyone. I am new in this forum. Knoppix is a great Linux distro. I write a software for an old computer, without mouse and keyboard - only with touchscreen (i think - it use the same drivers like touchpad, so I'm testing my application on laptop). But touchpad-tapping (i want to it mean click) i disabled. I have downloaded synaptics drivers from repositories, but it still not works. What I must do to enable it? Change something in /etc/X11/xorg.conf ? Thank you in advance, rr

  2. #2
    Senior Member registered user
    Join Date
    Dec 2009
    Posts
    423

    Unhappy

    [there is a emoticon on top which I can't remove]

    There are two ways to go about this, as you have noted, one is to modify /etc/X11/xorg.conf. Because knoppix xorg.conf is script generated, you will have understand the needed syntax and as well as understand which script is the one generating it.

    Alternatively, this is what I would do it. Firstly make sure you have this program 'synclient', check that it exists :-

    Code:
            $ synclient -l
    ( this will list all the available settings ).

    If it does not exist, you would have to install xserver-xorg-input-synaptic.
    After that go to /etc/X11/Xsession.d and add a file say '15x11-synaptics' with this content :-
    Code:
    #
    synclient "TapButton1=1"
    That's all which is needed. After you restarted Xserver, tap-to-click will be working.
    Last edited by kl522; 09-27-2010 at 10:59 PM.

  3. #3
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    @kl522
    Thank you for providing this valuable information.

    I use the command
    Code:
    synclient TapButton1=1 TapButton2=3 TapButton3=2
    to enable tapping with two and three fingers. Tapping with two fingers is set to button 3 because clicking with the right button is more often than clicking with the middle button.

  4. #4
    Junior Member
    Join Date
    Sep 2010
    Posts
    8
    thanks, it works

  5. #5
    Senior Member registered user
    Join Date
    Dec 2009
    Posts
    423
    You are fully justified to use tap-to-click on a system without keyboard and mouse.

    I use touchpad on a typical notebook, personally I consider tap-to-click a nuisance.

    However I do this :-

    synclient "HorizEdgeScroll=1"

    to allow me to use horizontal scroll on the edge of the touchpad.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA picture

LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA

$229.99



XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT picture

XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT

$59.00



Dell PERC H830 PCIe RAID Adapter Low Profile 2GB Cache 0NR5PC NR5PC w/ Battery picture

Dell PERC H830 PCIe RAID Adapter Low Profile 2GB Cache 0NR5PC NR5PC w/ Battery

$79.00



My Book Duo 4TB Certified Refurbished picture

My Book Duo 4TB Certified Refurbished

$129.99



Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE picture

Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE

$15.98



ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs picture

ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs

$86.99



ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID picture

ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID

$58.99



LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault picture

LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault

$39.00



Yottamaster 2 Bay 3.5

Yottamaster 2 Bay 3.5" RAID Hard Drive Enclosure USB 3.1 for SATA SSD HDD 32TB

$75.99



LSI 9260-8i 8 Port 6Gbps PCIe RAID Controller w/ SAS 2 to 4x SATA Breakout Cable picture

LSI 9260-8i 8 Port 6Gbps PCIe RAID Controller w/ SAS 2 to 4x SATA Breakout Cable

$33.00