Hi, Have just started using the above live CD. Successfully loaded the OS into RAM and wondered if it is possible to save system changes to USB and then continue from that point at the next live CD reboot. Thanks in advance. Dyfi.
Hi, Thank you for answering my query. I will purchase a new USB flash drive with sufficient space. What I need to clarify is :- Can I command to boot from that USB during the next live CD startup? Regards, Dyfi
Here is a link to pricing (~$23 with shipping) on the 8GB one I used. It's very fast, highly reliable, etc. If your BIOS will not boot to USB, you can use a CD and the commandor some such.Code:knoppix fromhd=/dev/sdb1
Cheers!
Krishna
Or get the 8 gig one I have for 13.95 shipped or even $11.95 with the coupon code MLC114196101816NL1:
http://www.meritline.com/a-data-c008...--p-55267.aspx
I'm quite happy with it.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
Different strokes for different folks. I don't have one, but these reviews suggest that it's not ideal for storing your OS. I'd happily use one for (say) documents, but not for movies or Knoppix.
Cheers!
Krishna
Your question, if I understand correctly is how to install KNOPPIX on the USB flash.
The answer to the question is there is a script called flash-knoppix which you can
run it from the commandline or you invoked it from the GUI :-
Assuming that you are using LXDE, you can invoked it from the GUI :-Code:$ su # flash-knoppix
( LXDE menu ) --> Preferences --> "Install KNOPPIX to flash disk"
( bottom left icon )
You will typical only need 1 G flash for that purpose. But the resulting installation is again, like the live CD, whatever things you saved, are saved into the memory and are not persistent across reboot. To have persistency, this is when you will need about 4G or more space. The system will prompt you for creation of persistent store when you boot up from the USB flash.
It depends - I used a DVD image which required about 4 GB.When choosing a size, one may freely pick a value that they find suitable. If only 500K was chosen, (for example) then that amount of space could be used for adding software, saving settings, downloading files etc. If more space is made available, then that means there'll be more room for such things in the extfs persistent store.But the resulting installation is again, like the live CD, whatever things you saved, are saved into the memory and are not persistent across reboot. To have persistency, this is when you will need about 4G or more space.Knoppix (likewise, Linux generally) is VERY flexible, and it's difficult to pose such limits and have them apply "across the board" - there are lots of exceptions.The system will prompt you for creation of persistent store when you boot up from the USB flash.
Cheers!
Krishna
I'm not very impressed by the reviews. The reviewers don't strike me as very scientific or precise, and that's not the same drive anyway. I can tell you that my drive has a read speed of 13.01 MB/sec as reported by USBDeview, which is better than a class 6 SDHC flash card that I've tested and almost as good as some SanDisk Extremme III SDHC cards that I own (they read at 15.65 MB/S). The Write speed is a bit lower (5.84 MB/S vs 9.80 MB/S) but read speed is more the determining factor for booting an OS or playing video (while Write speed is more of an issue for camera SDHC cards). I'm not saying this device's spec will be up to the Verbaitum device you referenced, but for less than half the cost I think it is a reasonable option. It by far outperforms other (smaller) flash drives that I own. I would be interested if you could post what you actually measure the Verbatim speed to be.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
Greetings, I am a newbie as well, however - i have several reinstalls and reconfigs under my belt. I have done and HD Gui Install. Then - tohd, fromhd to create a persistent image - that now accepts my password, and has the correct system time, and of course Knoppix folder displayed on the desktop (which is how you know when everything is fine). Of course, I have one remaining challenge. (I also broke grub, lost Windows - had to do a "fixmbr" from recovery console - and now have Windows, Knoppix, and Grub all restored..... My remaining problem is getting to my persistent home without booting from the CD and using the fromhd command. I have tried the simple "e" edit at the Grub boot screen - inputting "fromhd=/dev/sda3", and "home=scan" to no avail. After about 20 hours, and finally resting I am in a good place now. Any advise on how to proceed with getting Grub to acknowledge the "poor-mans" install?
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
HP ProLiant Microserver Micro Server HSTNS-5151 untested NO DRIVE CADDIES
$60.75
1U Supermicro Server X10DRU-i+ 2x Xeon E5-2690 V4 28 Cores 64GB 4x 10GBE-T 2PS
$324.00
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00