Hi, Have just started using the above live CD. Successfully loaded the OS into RAM and wondered if it is possible to save system changes to USB and then continue from that point at the next live CD reboot. Thanks in advance. Dyfi.
Hi, Have just started using the above live CD. Successfully loaded the OS into RAM and wondered if it is possible to save system changes to USB and then continue from that point at the next live CD reboot. Thanks in advance. Dyfi.
Hi, Thank you for answering my query. I will purchase a new USB flash drive with sufficient space. What I need to clarify is :- Can I command to boot from that USB during the next live CD startup? Regards, Dyfi
Here is a link to pricing (~$23 with shipping) on the 8GB one I used. It's very fast, highly reliable, etc. If your BIOS will not boot to USB, you can use a CD and the commandor some such.Code:knoppix fromhd=/dev/sdb1
Cheers!
Krishna
Or get the 8 gig one I have for 13.95 shipped or even $11.95 with the coupon code MLC114196101816NL1:
http://www.meritline.com/a-data-c008...--p-55267.aspx
I'm quite happy with it.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
Different strokes for different folks. I don't have one, but these reviews suggest that it's not ideal for storing your OS. I'd happily use one for (say) documents, but not for movies or Knoppix.
Cheers!
Krishna
Your question, if I understand correctly is how to install KNOPPIX on the USB flash.
The answer to the question is there is a script called flash-knoppix which you can
run it from the commandline or you invoked it from the GUI :-
Assuming that you are using LXDE, you can invoked it from the GUI :-Code:$ su # flash-knoppix
( LXDE menu ) --> Preferences --> "Install KNOPPIX to flash disk"
( bottom left icon )
You will typical only need 1 G flash for that purpose. But the resulting installation is again, like the live CD, whatever things you saved, are saved into the memory and are not persistent across reboot. To have persistency, this is when you will need about 4G or more space. The system will prompt you for creation of persistent store when you boot up from the USB flash.
It depends - I used a DVD image which required about 4 GB.When choosing a size, one may freely pick a value that they find suitable. If only 500K was chosen, (for example) then that amount of space could be used for adding software, saving settings, downloading files etc. If more space is made available, then that means there'll be more room for such things in the extfs persistent store.But the resulting installation is again, like the live CD, whatever things you saved, are saved into the memory and are not persistent across reboot. To have persistency, this is when you will need about 4G or more space.Knoppix (likewise, Linux generally) is VERY flexible, and it's difficult to pose such limits and have them apply "across the board" - there are lots of exceptions.The system will prompt you for creation of persistent store when you boot up from the USB flash.
Cheers!
Krishna
Greetings, I am a newbie as well, however - i have several reinstalls and reconfigs under my belt. I have done and HD Gui Install. Then - tohd, fromhd to create a persistent image - that now accepts my password, and has the correct system time, and of course Knoppix folder displayed on the desktop (which is how you know when everything is fine). Of course, I have one remaining challenge. (I also broke grub, lost Windows - had to do a "fixmbr" from recovery console - and now have Windows, Knoppix, and Grub all restored..... My remaining problem is getting to my persistent home without booting from the CD and using the fromhd command. I have tried the simple "e" edit at the Grub boot screen - inputting "fromhd=/dev/sda3", and "home=scan" to no avail. After about 20 hours, and finally resting I am in a good place now. Any advise on how to proceed with getting Grub to acknowledge the "poor-mans" install?
@BoDiddley:
There was a thread http://www.knoppix.net/forum/threads...nstall-to-boot some time ago. I think you should read it and ask your questions there.
Dell OptiPlex 3060 MICRO DESKTOP PC COMPUTER I5 8TH GEN UP TO 32GB UP TO 2TB M.2
$295.00
Lenovo IdeaCentre 3 07IRB8 Desktop Intel Core i5-13400 16GB 512GB SSD W11H
$349.99
Dell 15.6" NVIDIA Gaming Laptop - Intel Quad Core i7 64GB RAM 2TB SSD Windows 11
$446.00
New HP 24" All In One Desktop Computer 11th Gen i3 Up To 32GB RAM 2TB SSD Win 11
$409.99
Intel Xeon E5-2667 V2 LGA 2011 3.3GHz 8 Core 130W 25MB 8GT/s CPU Processor
$14.99
AMD Ryzen 7 5800X3D Processor (3.4GHz, 8 Cores, AM4) - 100-100000651WOF
$259.99
AMD Ryzen 7 7800X3D 8-Core - 16-Thread 4.2 GHz (5.0 GHz Max Boost) Socket A...
$304.95
Dell Inspiron 142-in-1 Touch Laptop Intel Core 5 Processor 8GB Memory...
$549.99
Lenovo IdeaCentre 3 27IAP7 27" Touch AIO Intel Core i5-13420H 8GB 512GB SSD W11H
$349.99
HP Z4 G4 8 Core Workstation 3.70GHz W-2145 Win11 Wholesale CTO- Custom to Order
$814.12