Results 1 to 8 of 8

Thread: NEC Versa E2000 laptop touchpad problem

  1. #1
    Junior Member
    Join Date
    Jul 2005
    Location
    New Zealand
    Posts
    8

    NEC Versa E2000 laptop touchpad problem

    Hi everyone

    I have a friend's laptop after a windows failure. I put Mepis 8.5 onto it and everything seems to work except the touch pad, which she really wants.

    Knoppix 5.1 tells me the touch pad is an ALPS GlidePoint and the touch pad works fine in that (live). Mepis tells me it's Macintosh or something, and doesn't work. I've messed around endlessly in xorg.conf but with no luck.

    My question now is: would installing Knoppix be a good idea? How user friendly is it installed? E.g. she uses Facebook, email, and looks at photos, so need to be able to call a photo viewing programme when CD or flash drive inserted. Also, if I do install Knoppix what version is recommended? The laptop is limited by only having 256 memory and she cannot afford to buy more.

    Many thanks.

  2. #2
    Senior Member registered user
    Join Date
    Mar 2004
    Posts
    1,516
    try installing Debian instead, which Knoppix is a customised version of (special set-up to make it boot and work from CD or DVD) or perhaps Ubuntu or xubuntu (xubuntu should be lighter on the resources).
    these above are more likely to work first try in my experience, reason I say this is that Knoppix is not really intended to be installed, it is a live disk (I think that buntu can be run live as a test though)

  3. #3
    Senior Member registered user
    Join Date
    Mar 2004
    Posts
    1,516
    hmm, perhaps an older version of Debian or puppy linux would be better as it is limited hardware

  4. #4
    Junior Member
    Join Date
    Jul 2005
    Location
    New Zealand
    Posts
    8
    Thanks, but I think I'll suggest she uses a mouse. Not sure if Debian would be easy enough for her.

    Thanks anyway

  5. #5
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by silverbirch View Post
    ... everything seems to work except the touch pad, which she really wants.

    Knoppix 5.1 tells me the touch pad is an ALPS GlidePoint and the touch pad works fine in that (live). ...

    My question now is: would installing Knoppix be a good idea? How user friendly is it installed?..
    Knoppix is really not intended for Live install. But if the touch pad works under Knoppix it can be made to work under Debian, which is intended for hard disk install. I suggest trying a net-install of the "testing" version of Debian. I also suggest that you get her an inexpensive mouse (I have several wireless ones that I got for less than $10 each). While I occasionally use the touch pad, I find the mouse much more handy most of the time. Using a mouse should not prevent one from using the touch pad also.

    Knoppix is pretty much Debian, with a bunch of stuff installed. If Knoppix is suitable then Debian should be to, just apt-get the applications that you or she want.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  6. #6
    Junior Member
    Join Date
    Jul 2005
    Location
    New Zealand
    Posts
    8
    Thanks for your comments. I spoke to her today and she's agreeable to using a mouse. I feel a bit frustrated in not being able to get the touchpad working, but I see it is a common problem from my googling, and reading of the forums.

    I'm not sure if Debian would be easy enough for her.

    Thanks for your input.

  7. #7
    Senior Member registered user
    Join Date
    Mar 2004
    Posts
    1,516
    As far as user friendliness Debian and knoppix are the same, it should be near to 100% same experience, uhm, ok when installed that is.

  8. #8
    Junior Member
    Join Date
    Jul 2005
    Location
    New Zealand
    Posts
    8
    Thanks - truth to tell I can't be bother with another install - will see how she goes with Mepis since it is on there. Thanks for your input.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge T420 2x Xeon E5-2430 V2 2.50GHZ 32GB DDR3-1600MHZ 2x 550W PSU picture

Dell PowerEdge T420 2x Xeon E5-2430 V2 2.50GHZ 32GB DDR3-1600MHZ 2x 550W PSU

$149.95



Dell Precision T3600 XEON E5-1607 3.0GHz 16GB RAM 500GB HD WIN10 Pro Workstation picture

Dell Precision T3600 XEON E5-1607 3.0GHz 16GB RAM 500GB HD WIN10 Pro Workstation

$99.00



Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config picture

Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config

$479.99



HP Z230 Workstation Towers Xeon E3-1231 V3 3.20ghz 8GB Ram NO HDD picture

HP Z230 Workstation Towers Xeon E3-1231 V3 3.20ghz 8GB Ram NO HDD

$35.96



SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor picture

SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor

$3.96



Intel Xeon E5-2699 v3 2.3GHz 18-Core 45MB 145W LGA2011-3 CPU/Processor SR1XD picture

Intel Xeon E5-2699 v3 2.3GHz 18-Core 45MB 145W LGA2011-3 CPU/Processor SR1XD

$40.99



Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU picture

Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU

$32.79



Intel Xeon E5-2690 v2 10-Core 3.0GHz 25M 8GTs LGA2011 Server CPU Processor SR1A5 picture

Intel Xeon E5-2690 v2 10-Core 3.0GHz 25M 8GTs LGA2011 Server CPU Processor SR1A5

$17.99



Intel Xeon E5-2697 v4 2.3GHz 18-Core Processor CPU LGA2011 SR2JV picture

Intel Xeon E5-2697 v4 2.3GHz 18-Core Processor CPU LGA2011 SR2JV

$49.99



Dell Poweredge R440 2x Xeon Silver 4110 SR3GH 32GB RAM No Drives Server picture

Dell Poweredge R440 2x Xeon Silver 4110 SR3GH 32GB RAM No Drives Server

$349.99