Results 1 to 8 of 8

Thread: NEC Versa E2000 laptop touchpad problem

  1. #1
    Junior Member
    Join Date
    Jul 2005
    Location
    New Zealand
    Posts
    8

    NEC Versa E2000 laptop touchpad problem

    Hi everyone

    I have a friend's laptop after a windows failure. I put Mepis 8.5 onto it and everything seems to work except the touch pad, which she really wants.

    Knoppix 5.1 tells me the touch pad is an ALPS GlidePoint and the touch pad works fine in that (live). Mepis tells me it's Macintosh or something, and doesn't work. I've messed around endlessly in xorg.conf but with no luck.

    My question now is: would installing Knoppix be a good idea? How user friendly is it installed? E.g. she uses Facebook, email, and looks at photos, so need to be able to call a photo viewing programme when CD or flash drive inserted. Also, if I do install Knoppix what version is recommended? The laptop is limited by only having 256 memory and she cannot afford to buy more.

    Many thanks.

  2. #2
    Senior Member registered user
    Join Date
    Mar 2004
    Posts
    1,516
    try installing Debian instead, which Knoppix is a customised version of (special set-up to make it boot and work from CD or DVD) or perhaps Ubuntu or xubuntu (xubuntu should be lighter on the resources).
    these above are more likely to work first try in my experience, reason I say this is that Knoppix is not really intended to be installed, it is a live disk (I think that buntu can be run live as a test though)

  3. #3
    Senior Member registered user
    Join Date
    Mar 2004
    Posts
    1,516
    hmm, perhaps an older version of Debian or puppy linux would be better as it is limited hardware

  4. #4
    Junior Member
    Join Date
    Jul 2005
    Location
    New Zealand
    Posts
    8
    Thanks, but I think I'll suggest she uses a mouse. Not sure if Debian would be easy enough for her.

    Thanks anyway

  5. #5
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by silverbirch View Post
    ... everything seems to work except the touch pad, which she really wants.

    Knoppix 5.1 tells me the touch pad is an ALPS GlidePoint and the touch pad works fine in that (live). ...

    My question now is: would installing Knoppix be a good idea? How user friendly is it installed?..
    Knoppix is really not intended for Live install. But if the touch pad works under Knoppix it can be made to work under Debian, which is intended for hard disk install. I suggest trying a net-install of the "testing" version of Debian. I also suggest that you get her an inexpensive mouse (I have several wireless ones that I got for less than $10 each). While I occasionally use the touch pad, I find the mouse much more handy most of the time. Using a mouse should not prevent one from using the touch pad also.

    Knoppix is pretty much Debian, with a bunch of stuff installed. If Knoppix is suitable then Debian should be to, just apt-get the applications that you or she want.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  6. #6
    Junior Member
    Join Date
    Jul 2005
    Location
    New Zealand
    Posts
    8
    Thanks for your comments. I spoke to her today and she's agreeable to using a mouse. I feel a bit frustrated in not being able to get the touchpad working, but I see it is a common problem from my googling, and reading of the forums.

    I'm not sure if Debian would be easy enough for her.

    Thanks for your input.

  7. #7
    Senior Member registered user
    Join Date
    Mar 2004
    Posts
    1,516
    As far as user friendliness Debian and knoppix are the same, it should be near to 100% same experience, uhm, ok when installed that is.

  8. #8
    Junior Member
    Join Date
    Jul 2005
    Location
    New Zealand
    Posts
    8
    Thanks - truth to tell I can't be bother with another install - will see how she goes with Mepis since it is on there. Thanks for your input.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Gigabyte Z370P D3 ATX Z370 LGA1151 Motherboard (Support Intel 6/7th 8th 9th) picture

Gigabyte Z370P D3 ATX Z370 LGA1151 Motherboard (Support Intel 6/7th 8th 9th)

$59.99



ASRock B550M Pro SE AM4 DDR4 SATA 6Gb/s 1 PCIe 4.0 x16 Micro ATX Motherboard picture

ASRock B550M Pro SE AM4 DDR4 SATA 6Gb/s 1 PCIe 4.0 x16 Micro ATX Motherboard

$84.99



ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield picture

ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield

$42.00



Asus H81M-C Intel LGA1150 DDR3 Desktop Motherboard MicroATX Socket H3  picture

Asus H81M-C Intel LGA1150 DDR3 Desktop Motherboard MicroATX Socket H3

$23.99



MSI H110M pro-vd 6th/7th Gen Intel DDR4 MATX Motherboard NO I/O SHIELD picture

MSI H110M pro-vd 6th/7th Gen Intel DDR4 MATX Motherboard NO I/O SHIELD

$35.00



Asus Prime H310M-A R2.0 Intel LGA 1151 DDR4 Desktop Motherboard picture

Asus Prime H310M-A R2.0 Intel LGA 1151 DDR4 Desktop Motherboard

$54.99



MSI H81I LGA1150 MINI-ITX DDR3 Desktop Motherboard With I/O Shield  picture

MSI H81I LGA1150 MINI-ITX DDR3 Desktop Motherboard With I/O Shield

$32.99



GIGABYTE GA-X99-UD4P MOTHERBOARD, M.2 SATA3, LGA2011-3, DDR4, & I/O Shield picture

GIGABYTE GA-X99-UD4P MOTHERBOARD, M.2 SATA3, LGA2011-3, DDR4, & I/O Shield

$69.99



Gigabyte M-ATX motherboard with Intel Core i3 8100 CPU and 8GB DDR4 RAM picture

Gigabyte M-ATX motherboard with Intel Core i3 8100 CPU and 8GB DDR4 RAM

$84.00



ASUS PRIME Z690-P WIFI D4 ATX Motherboard Intel LGA1700 DDR4 HDMI picture

ASUS PRIME Z690-P WIFI D4 ATX Motherboard Intel LGA1700 DDR4 HDMI

$99.99