Open Synaptic package manager and search for dmraid. Then see here: http://wiki.debian.org/DebianInstaller/SataRaid.
YMMV
Hi,
I have a HP workstation xw4200 with a SATA controller that can be configured as a stand-alone SATA controller (no RAID) or in full f/w RAID 0, 1 or ... mode. In my configuration it is set up in a RAID 1 mode, presenting the two 160 GB disks as one mirrored set.
Windows installation detected only one disk, being the mirrored volume. Installation of Windows succeeded. Windows presents the RAID controller as a standard disk (such as IDE) and did not require specific drivers to be installed.
Now I want to copy information I put aside back to this RAID volume, using knoppix.
Problem is knoppix only reports the two individual disks, not the RAID volume.
I can see the RAID set but the status says "RAID is not available".
fdisk -l only lists the individual disks, not the RAID set.
My question: what can I do to mount this RAID volume?
Thanks for any information that could help,
Pat
Open Synaptic package manager and search for dmraid. Then see here: http://wiki.debian.org/DebianInstaller/SataRaid.
YMMV
I meant to point the OP in the direction of dmraid, and also mdadm. The link I posted states:I dont have the hardware either, and as it turns out the 6.0.1 version of Knoppix has dmraid and mdadm installed, so hopefully the OP can give them a try without downloading anything.The RAID support offered by most Serial ATA disk controllers is not hardware RAID. Instead it can best be classified as "software RAID provided by the BIOS of the controller".
What kind of SATA controller is actually responsible for the array? It doesn't sound like an "actual" array (e.g. hardware RAID), so you'll probably have to re-setup the RAID using mdadm when using Knoppix.
Vintage Computer, Memorex Storage Unit For Main Frame Computer 1986, Movie Prop
$995.00
1 x NOS Vintage Burrougs 4 Tube Mainframe Nixie Assembly - P/N BEZ-59-4
$50.00
10 VINTAGE MAINFRAME COMPUTER PUNCH CARDS. IBM 80-column University of Iowa
$9.95
IBM FRU26F7630 3390 DASD Hard Drive 10.8” from Vintage Mainframe
$249.99
*PAIR* 1960's Vintage GE-600 Series Mainframe Computer PCBs Bitslice Accumulator
$14.95
IBM mainframe emulation software, OS/360 DOS/360 VM/370
$12.50
AST Bravo MS P/60 Vintage Mainframe Computer Old IBM Style NO HDD
$129.95
IBM mainframe server cpu IBM93 vintage cpu collector's item
$125.99
HP Compaq AlphaServer DS20e CPU 54-30060-01 KN311 667Mhz 5030059-01 54-30060-04
$599.00
AutoCad Software Release 12 - Floppy Disk 5.25in Complete for DOS Mainframe
$359.99