Open Synaptic package manager and search for dmraid. Then see here: http://wiki.debian.org/DebianInstaller/SataRaid.
YMMV
Hi,
I have a HP workstation xw4200 with a SATA controller that can be configured as a stand-alone SATA controller (no RAID) or in full f/w RAID 0, 1 or ... mode. In my configuration it is set up in a RAID 1 mode, presenting the two 160 GB disks as one mirrored set.
Windows installation detected only one disk, being the mirrored volume. Installation of Windows succeeded. Windows presents the RAID controller as a standard disk (such as IDE) and did not require specific drivers to be installed.
Now I want to copy information I put aside back to this RAID volume, using knoppix.
Problem is knoppix only reports the two individual disks, not the RAID volume.
I can see the RAID set but the status says "RAID is not available".
fdisk -l only lists the individual disks, not the RAID set.
My question: what can I do to mount this RAID volume?
Thanks for any information that could help,
Pat
Open Synaptic package manager and search for dmraid. Then see here: http://wiki.debian.org/DebianInstaller/SataRaid.
YMMV
I meant to point the OP in the direction of dmraid, and also mdadm. The link I posted states:I dont have the hardware either, and as it turns out the 6.0.1 version of Knoppix has dmraid and mdadm installed, so hopefully the OP can give them a try without downloading anything.The RAID support offered by most Serial ATA disk controllers is not hardware RAID. Instead it can best be classified as "software RAID provided by the BIOS of the controller".
What kind of SATA controller is actually responsible for the array? It doesn't sound like an "actual" array (e.g. hardware RAID), so you'll probably have to re-setup the RAID using mdadm when using Knoppix.
Dell T7810 Workstation 1x E5-2603 v3 16GB RAM Nvidia QUADRO +cables
$120.00
HP Z230 Workstation Towers Xeon E3-1231 V3 3.20ghz 8GB Ram NO HDD
$39.96
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99
HP Z440 Workstation 18Cores Xeon E5-2699 V3 128GB 1TB SSD 2TB WIFI WIN11 R5-340X
$309.99
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor
$3.87
Genuine Intel Xeon E5-2680V4 2.40Ghz 14-Core 35MB LGA2011 CPU P/N: SR2N7
$14.99
Intel Xeon E5-2697A V4 2.6GHz CPU Processor 16-Core Socket LGA2011 SR2K1
$37.99
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$32.79
Matched Pair __ Intel Xeon Gold 6152 2.1Ghz 22-Core 140W CPU SR3B4
$204.95
Intel Xeon E5-2667 V4 SR2P5 (3.2GHZ/8-CORE/25MB/135W) PROCESSOR CPU
$29.89