Open Synaptic package manager and search for dmraid. Then see here: http://wiki.debian.org/DebianInstaller/SataRaid.
YMMV
Hi,
I have a HP workstation xw4200 with a SATA controller that can be configured as a stand-alone SATA controller (no RAID) or in full f/w RAID 0, 1 or ... mode. In my configuration it is set up in a RAID 1 mode, presenting the two 160 GB disks as one mirrored set.
Windows installation detected only one disk, being the mirrored volume. Installation of Windows succeeded. Windows presents the RAID controller as a standard disk (such as IDE) and did not require specific drivers to be installed.
Now I want to copy information I put aside back to this RAID volume, using knoppix.
Problem is knoppix only reports the two individual disks, not the RAID volume.
I can see the RAID set but the status says "RAID is not available".
fdisk -l only lists the individual disks, not the RAID set.
My question: what can I do to mount this RAID volume?
Thanks for any information that could help,
Pat
Open Synaptic package manager and search for dmraid. Then see here: http://wiki.debian.org/DebianInstaller/SataRaid.
YMMV
I meant to point the OP in the direction of dmraid, and also mdadm. The link I posted states:I dont have the hardware either, and as it turns out the 6.0.1 version of Knoppix has dmraid and mdadm installed, so hopefully the OP can give them a try without downloading anything.The RAID support offered by most Serial ATA disk controllers is not hardware RAID. Instead it can best be classified as "software RAID provided by the BIOS of the controller".
What kind of SATA controller is actually responsible for the array? It doesn't sound like an "actual" array (e.g. hardware RAID), so you'll probably have to re-setup the RAID using mdadm when using Knoppix.
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
HP ProLiant Xeon E3-1220L V2 2.30 GHz 16 GB RAM MicroServer Gen8 NO DRIVES
$199.99
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00