Open Synaptic package manager and search for dmraid. Then see here: http://wiki.debian.org/DebianInstaller/SataRaid.
YMMV
Hi,
I have a HP workstation xw4200 with a SATA controller that can be configured as a stand-alone SATA controller (no RAID) or in full f/w RAID 0, 1 or ... mode. In my configuration it is set up in a RAID 1 mode, presenting the two 160 GB disks as one mirrored set.
Windows installation detected only one disk, being the mirrored volume. Installation of Windows succeeded. Windows presents the RAID controller as a standard disk (such as IDE) and did not require specific drivers to be installed.
Now I want to copy information I put aside back to this RAID volume, using knoppix.
Problem is knoppix only reports the two individual disks, not the RAID volume.
I can see the RAID set but the status says "RAID is not available".
fdisk -l only lists the individual disks, not the RAID set.
My question: what can I do to mount this RAID volume?
Thanks for any information that could help,
Pat
Open Synaptic package manager and search for dmraid. Then see here: http://wiki.debian.org/DebianInstaller/SataRaid.
YMMV
I meant to point the OP in the direction of dmraid, and also mdadm. The link I posted states:I dont have the hardware either, and as it turns out the 6.0.1 version of Knoppix has dmraid and mdadm installed, so hopefully the OP can give them a try without downloading anything.The RAID support offered by most Serial ATA disk controllers is not hardware RAID. Instead it can best be classified as "software RAID provided by the BIOS of the controller".
What kind of SATA controller is actually responsible for the array? It doesn't sound like an "actual" array (e.g. hardware RAID), so you'll probably have to re-setup the RAID using mdadm when using Knoppix.
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$299.99
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell R630 Server 2x E5-2620 V4 2.1GHz =16 Cores 128GB DDR4 1x 960GB 2x 1G 2x 10G
$210.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R230 Single Intel Xeon E3-1220 v5 @3.00GHz 16GB RAM No HDD H330
$102.50
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
Dell PowerEdge R710 2.5" 2U Server 2x X5670 2.93GHZ 12-Core 128gb 2x 1TB SAS
$214.99