-
Senior Member
registered user
Dual booting with windows
Seems that windows is making it more difficult to dual boot with Linux. I use knoppix 6.2 to get around that on my eeepc's. Install knoppix to a flash drive and configure the netbook bios so that it will boot from flash. Repartition the netbook hard drive so that you have a large enough partition for the linux stuff. Make it ext3. The first time you boot knoppix, use the tohd cheat code and target the newly created ext3 partition. Tell it to create a persistent storage area. Only use half the space so that you have room for a backup. Now each time you boot using the flash drive, use the fromhd cheat code. After booting you can remove the flash and just run from disk.
-
Senior Member
registered user
What you describe works but if you want to boot from harddisk only, alternative bootloader 'grldr' will make life slightly easier. This is my boot.ini :-
Code:
[boot loader]
timeout=5
REM default=multi(0)disk(0)rdisk(0)partition(2)\WINDOWS
default=C:\grldr
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
c:\grldr="Knoppix(Linux)"
And this is my 'menu.lst' :-
Code:
######################################################
# GvR Sept 30th 2004
color black/cyan yellow/cyan
timeout=5
default=0
title Knoppix on Internal HD (squashfs, normal)
kernel /boot/syslinux/linux squashfs i915.modeset=1 lang=us apm=power-off nosound nomce loglevel=0 quiet dma noeject
initrd /boot/syslinux/minirt.gz
boot
title Knoppix on Internal HD (cloop, normal)
kernel /boot/syslinux/linux i915.modeset=1 lang=us apm=power-off nosound nomce loglevel=0 quiet dma noeject
initrd /boot/syslinux/minirt.gz
boot
With the above I could menu select whichever I want to boot.
-
Senior Member
registered user
Where does this boot loader reside? If it's in the mbr, then that's what vista etc seems to object to.
If it's not in the mbr then what triggers it once you turn on the machine?
-
Senior Member
registered user
There is no need to mess with the existing bootloader of NT. The new ( chain- ) bootloader is installed as a file on the NTFS. The existing NTLDR is the one responsible for running 'grldr' - only if the user menu select it or if is a defaulted selection. As you can see from boot.ini.
To boot NT :-
NTLDR ---> (XP/Vista/Whatever...)
To boot KNOPPIX:-
NTLDR-->GRLDR (grub)--> KNOPPIX
-
Senior Member
registered user
I wonder if m$ has checksumed the boot.ini, with md5sum say, so that any modifications would get detected and complained about?
Last edited by turbine; 12-05-2010 at 07:17 PM.
-
Senior Member
registered user
The boot.ini is protected from casual modification by keeping the file as hidden and readonly. If you use the NT to unhide and modify boot.ini, you might get a few warnings. Apart from that there is nothing else because NTLDR allows for multiboot NT versions, and a typical NT installer might automatically/programmatically edit boot.ini during the installation process. It's an allowed feature.
-
Senior Member
registered user
Originally Posted by
kl522
The boot.ini is protected from casual modification by keeping the file as hidden and readonly. If you use the NT to unhide and modify boot.ini, you might get a few warnings. Apart from that there is nothing else because NTLDR allows for multiboot NT versions, and a typical NT installer might automatically/programmatically edit boot.ini during the installation process. It's an allowed feature.
You and turbine seem to be talking at cross purposes. You are talking about dual booting with Windows XP/NT/2000. turbine mentioned Vista.
The XP approach doesn't work with Vista /Windows 7 because, amongst other things, there isn't a boot.ini.
However, it is possible to dual boot with Vista or Windows 7 without touching the MBR.
Use of EasyBCD and neogrub is one way.
Another way is to follow the instructions here:
http://www.sysresccd.org/Sysresccd-m...s_Vista.2F2008
in the section:
update your boot loader: Windows Vista/2008
(the menu.lst is as suggested here - not on the sysresccd site).
-
Senior Member
registered user
Originally Posted by
ICPUG
The XP approach doesn't work with Vista /Windows 7 because, amongst other things, there isn't a boot.ini.
However, it is possible to dual boot with Vista or Windows 7 without touching the MBR.
Thanks for the correction. Obviously I am left behind already.
I did not know they removed the boot.ini thingie.
-
Senior Member
registered user
Actually I do also want to dual boot with an xp machine so kl522's suggestions are most welcome. I haven't tried to implement them yet because my google search of grldr turned up several negative comments implying that it was a linux app that windows just did not like. I will still look into using it.
-
Senior Member
registered user
grldr is ***NOT*** a linux app. Certainly there are many false information on the internet, but the true ones should be more than the false one in this case, but I wonder why you only managed to read the false information. grldr is a DOS program.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Juniper MX104-AC 4 MIC Slot Chassis w/ 2x RE-S-MX104 and 2x PWR-MX104-AC
$1899.00
*New* MIC-MRATE Juniper 12-Port Multi-Rate MIC module
$749.00
Juniper 48-Port PoE GbE Network Switch w/ Dual Power Supplies F B EX4300-48P
$178.99
Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch
$119.00
Juniper EX4600-40F-AFO 24x SFP+/SFP & 4x QSFP+ Ports Switch 2XPSU TESTED
$800.95
Juniper EX3400-48P 48-Port PoE+ 4x SFP+ 2x 40G QSFP+ Dual PSU & Fan AFO Switch
$259.99
Juniper EX4300-48T 48 Port 1G 4 QSFP 40G Dual PSU AFO w/ Rails, EX-UM-4X4SFP Mod
$169.00
Juniper 48-Port GbE PoE+ & 4-Port 10GB SFP+ Network Switch EX3300-48P w/ License
$49.99
Juniper QFX5100-48S 48-Port 10GbE SFP+ 6x40GbE QSFP Network Switch w/Ears Tested
$599.99
Juniper Networks SRX550 Services Gateway Security Appliance with 6x XGPIM 2x PSU
$499.00