-
v6.2.1 CD boot error: Input/output error
Successfully:
Verified CD with boot option 'knoppix testcd'
Past mounting /mnt-system
Past mounting /KNOPPIX
Past mounting /UNIONFS
Past symlinks to /UNIONFS
Following error found:
/init: exec: line 742: /sbin/init: input/output error
The following cheat codes were used with no success.
knoppix vga=0
knoppix (1-5)
knoppix acpi=off noapic nolapic pci=bios hpet=off nodma
knoppix acpi=off pnpbios=off noapic noapm
knoppix vga=0 debug -b 3
Using 'debug' boot option and typing 'exit' at each prompt, the system stalls at the following prompt:
BusyBox v1.14.2 (Debian 1:1.14.2-2) built-in shell (ash)
Enter 'help' for a list of built-in commands.
sh: can't access tty; job control turned off
/ #
At this point, I typed 'exit' and then 'init 5' but still have a blank screen.
-
Senior Member
registered user
The input/output error thingie with /sbin/init, seems to be a fairly common problem, not limited to knoppix only. The errors seem to be due to /sbin/init failed to open /dev/console for input/output, but nobody seems to have found out why it happens only to certain systems :-
http://www.linuxquestions.org/questi...-error-397113/
Perhaps you can try to debug it by checking the permission of /dev/console and also do some chmod, when you run it under debug mode.
Cheers.
-
Solution found
Thanks 'kl522' for your suggestion, however, it seems that 'input/output' error could be due to many possible causes. To change the permissions on a clean downloaded distribution doesn't make sense.
In my case the problem was with my CD which explains why a file could not be read i.e. input error.
My solution was simple:
- used a new, clean, high-quality 700MB CDR
- burned at slowest speed 4x
- OPTIONAL: increased the cache and RAM buffer size
As per the forums, most errors are due to:
1. Incomplete/bad download
2. Bad burn
-
Administrator
Site Admin-
![Quote](images/misc/quote_icon.png)
Originally Posted by
peter.hentrich
As per the forums, most errors are due to:
1. Incomplete/bad download
2. Bad burn
yup, and both easily preventable:
1) Use the torrents rather than the mirrors, and do the simple md5 test. If you don't want to learn how to do either because you have never done them before, then it is very likely that Knoppix and Linux are not for you and you should stay with Windows.
2) Burning at slow speed, as an ISO, with burning software that supports both ISO burning and verification after burning (such as Nero) with verification enabled should give a good burn.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
-
Downloads and burning
Harry, thanks for your experienced advice and patience with first-timers like me.
These are simple measures to ensure successful CD/DVDs:
1a) Use the torrents rather than the mirrors
Yes, this is the best option. Using a torrent does not eliminate errors though, as I discovered. Whether by user error or otherwise, my 'uTorrent' download was incomplete even when it said "finished". I had to re-check/re-start my download.
1b) Do the simple md5 test
Yes, this step should be mandatory after a finished download. Foolishly, I ignored this hash key verification and trusted my torrent application to verify the complete download.
For an explanation of the procedure, go to:
http://www.knoppix.net/wiki/Downloading_FAQ#Q:_What_are_these_strange_MD5_file s_that_accompany_the_ISO_CD_images.3F
It's a single command:
Code:
md5sum -c KNOPPIX_xxxxxxxx.iso.md5
Here is the erraneous output after my first attempt of the uTorrent download:
Code:
md5sum -c KNOPPIX_V6.2.1CD-2010-01-31-EN.iso
md5sum: @@@@@@@@@@@@@@@@@@@@@@@@@@ : No such file or directory
@@@@@@@@@@@@@@@@@@@@@@@@@@ : FAILED open or read
md5sum: int1e = %08x: No such file or directory
int1e = %08x: FAILED open or read
md5sum: WARNING: 2 of 2 listed files could not be read
Here is the successful output after I 're-checked' and 're-started' my uTorrent download:
Code:
md5sum -c KNOPPIX_V6.2.1CD-2010-01-31-EN.iso.md5
KNOPPIX_V6.2.1CD-2010-01-31-EN.iso: OK
Knoppix is working and an important lesson learned.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Dell PowerEdge M1000e Chassis w/ 16 x M600 Blade Servers(No Ram, 2 x 147GB HD) picture](/store/img/g/r2UAAOSwJ65exYAl/s-l225/Dell-PowerEdge-M1000e-Chassis-w-16-x-M600-Blade-Se.jpg)
Dell PowerEdge M1000e Chassis w/ 16 x M600 Blade Servers(No Ram, 2 x 147GB HD)
$300.00
![Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD picture](/store/img/g/HUMAAOSwj3ZmdO6c/s-l225/Dell-PowerEdge-M620-Blade-Server-2-x-Xeon-e5-2665-.jpg)
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$44.99
![HP ProLiant BL460c Gen9 Blade 2x E5-2630v3 1.8GHz 16 Cores 32GB DDR4, 2x SSD 120 picture](/store/img/g/mMcAAOSw~7NmjYWL/s-l225/HP-ProLiant-BL460c-Gen9-Blade-2x-E5-2630v3-1-8GHz-.jpg)
HP ProLiant BL460c Gen9 Blade 2x E5-2630v3 1.8GHz 16 Cores 32GB DDR4, 2x SSD 120
$139.99
![CISCO UCSB-B200-M3 V06 BLADE SERVER 2*INTEL XEON E5-2640 V2 8C 2GHz 128GB RAM picture](/store/img/g/e8oAAOSwZOJmQnuG/s-l225/CISCO-UCSB-B200-M3-V06-BLADE-SERVER-2-INTEL-XEON-E.jpg)
CISCO UCSB-B200-M3 V06 BLADE SERVER 2*INTEL XEON E5-2640 V2 8C 2GHz 128GB RAM
$74.99
![Google Search Appliance - Dell PowerEdge R710 x2 Xeon X5690 192GB Memory 6TB HDD picture](/store/img/g/GiMAAOSwhXNl7lu2/s-l225/Google-Search-Appliance-Dell-PowerEdge-R710-x2-Xeo.jpg)
Google Search Appliance - Dell PowerEdge R710 x2 Xeon X5690 192GB Memory 6TB HDD
$529.99
![Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD picture](/store/img/g/JBcAAOSwdu1mXLZT/s-l225/Dell-PowerEdge-M620-Blade-Server-2x-10C-E5-2690v2-.jpg)
Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD
$125.00
![Dell PowerEdge M620 Blade Server picture](/store/img/g/escAAOSw75Zlodg9/s-l225/Dell-PowerEdge-M620-Blade-Server.jpg)
Dell PowerEdge M620 Blade Server
$39.99
![Dell PowerEdge M520 Blade Server Xeon E5-2403 NO HDD NO RAM picture](/store/img/g/VFIAAOSwXbhmYLj1/s-l225/Dell-PowerEdge-M520-Blade-Server-Xeon-E5-2403-NO-H.jpg)
Dell PowerEdge M520 Blade Server Xeon E5-2403 NO HDD NO RAM
$40.00
![Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W picture](/store/img/g/9HsAAOSw3OZmMT~n/s-l225/Dell-PowerEdge-FX2s-CTO-Blade-4-Slot-2U-Chassis-2x.jpg)
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
![Dell PowerEdge FX2S FC830 Blade Server Chassis Enclosure 2*2000W PSU NO BLADES picture](/store/img/g/a4EAAOSwJhJmPSdt/s-l225/Dell-PowerEdge-FX2S-FC830-Blade-Server-Chassis-Enc.jpg)
Dell PowerEdge FX2S FC830 Blade Server Chassis Enclosure 2*2000W PSU NO BLADES
$299.99