Hi I am absolutly a newbie when it comes to linux. I know dos so I was hoping that helps as I need to use dd_rescue to try and recover some data.
I am using knoppix live DVD lastest version downloaded today. I have a laptop booted with knoppix and have 2x USB devices. 1x a Kingston 1Gb flashdrive and the 2nd a Seagate 2Tb external USB drive. Both sare see and can be browsed to. Kingston sdc1 and Seagate sdb
Now I have a single file on the Kingston and it is not corrupt but I am testing as I cannot get this correct. I run the ffg command and I get an error.
dd_rescure /dev/sdc1 /dev/sdb
This runs without an error, but there are NO files on sdb when I browse to it. (I believe there should be none)
I than run....
dd_rescue /dev/sdc1 /dev/sdb/backup.img
I get an error that the
dd_rescue: (fatal): open "/dev/sdb/backup.img" failed: not a directory
I created a directory on sdb called backup and tried it and I get same error. I also created a file called backup.img thinking that when it encounters it it would let me know if it should overwrite it...but no difference.
What am I doing wrong?
Thanks
PS: I tried to initially run the corrupt drive and I am not sure but it went on for days (I think 5-6 days) and had not finished. (the drive capacity was 120Gb)
Ok I got past the initial error and I did this by actually changing directory to the destination drive i.e. where the actual log file and image file (of the rescued HDD) will reside. I believe there may be a command in Linux similar to DOSes "Path" command ...however I have not investigated this as yet. NOTE IMPORTANT: I did all of this in the "roots" terminal window as the regular terminal window does not have enough permissions. Again I am new to Linux and didn't know how to login as root from the regular command/terminal window.
So I was able to successfully make an image of my Test flash drive with the a single file in it and was able to mount (again here I had to be in the actual folder where this recovers image file is...that Path command mentioned above).
So I than proceeded to try and recover the 120Gb HDD installed in an external USB enclosure. The system saw the drive fine and also reported it as NTFS. I got the image file after several hours and finally mounted the image to find it black with no files. So not sure if the previous attempts with dd_resuce wiped the file clean.
Anyway, I proceeded to recover another drive 750Gb SATA in an External USB enclosure and when I looked at the file system it indicated unrecognized and showed it as FAT. However it reported the drive as a 2Tb drive and not 750Gb as marked in the lable.....
Any 'CONSTRUCTIVE' idea's please ....
GENUINE CISCO QSFP-40/100-SRBD 100G QSFP Transceiver
$129.99
Cisco WAP371 IEEE 802.11ac 1.27 Gbit/s Wireless Access Point
$80.00
Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24
$117.00
GENUINE CISCO DS-SFP-FC32G-SW SFP NEW SEALED SEE PHOTOS SHIPS FREE
$74.99
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$79.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Cisco Nexus N3K-C3048TP-1GE 48 Port Switch w/ Dual Power - Same Day Shipping
$85.99
Cisco WS-C3750X-48T-S 48 Port 3750X Gigabit Switch - Same Day Shipping
$49.95
Cisco C9300-48U-A 48-Port Gig UPoE Network Advantage Switch -Same Day Shipping
$859.95
Cisco Nexus N3K-C3172PQ-XL 48P 10GbE SFP+ 4P QSFP+ Switch N3K-C3172PQ-XL-F
$229.00