I am also struggling with these, but have no solutions to offer as yet.
I've created a Knoppix 6.4.3 USB drive from the CD and set up persistent storage.
When I change the desktop background, or adjust PCManFM settings (e.g. preventing partitions automatically mounting), they are lost when I log out of LXDE (which then starts a new LXDE session) or reboot Knoppix. The contents of ~/.config/pcmanfm/LXDE/pcmanfm.conf seem to get reset.
I've tried deleting and recreating the persistent storage (knoppix-data.img) and deleting the ~/.config/pcmanfm directory so that it gets recreated.
Anyone else see this, know what's going on, or know of a solution?
Thank you
I am also struggling with these, but have no solutions to offer as yet.
Thanks for confirming it's not just me. Here's a workaround I've discovered:
Configure PCManFM settings and the desktop as required.
Copy the settings to "LXDE.conf" in the "pcmanfm" directory:
$ cp ~/.config/pcmanfm/LXDE/pcmanfm.conf ~/.config/pcmanfm/LXDE.conf
Recursively remove knoppix's write permission from the pcmanfm directory structure:
$ chmod -R u-w ~/.config/pcmanfm
Obviously subsequent changes now won't persist.
I boot into Knoppix from a USB drive to back up my OS system partition. If PCManFM auto-mounts all partitions, this could affect the integrity of my backups.
Thanks.
I've added 'umount -r /media/sda3' to my rc.local file.
My main ntsf file then initially shows as unmounted unless OS icon is
single-clicked on PCManFM. Pretty slim protection.
Peculiarly, and fortunately, other ntsf files on
sda1 and sda2 are not automatically mounted by default
as is sda3 here.
This is a bad choice of default in PCManFM and a critical
error somewhere in the init structure of K6.4.3 IMHO.
I'd like it to be difficult for knoppix, the user,
to access my ntsf files.
I note several other places where changed default choices do not
survive re-boot in K6.4.3 that were no such nuisance in K6.2.1.
These include the cube background jpg, firewall settings, and
alsamixer settings.
When I had a similar problem in 6.2.1, kl522 offered
the following suggestion, which I now understand:
Edit /etc/xdg/lxsession/LXDE/autostart
such that the @pcmanfm line reads @pcmanfm --desktop
That is, delete the --profile LXDE.
I think this will empower the PCManFM gui's to control
desktop preferences as one would expect.
Cheers, and belated thanks to kl522.
[QUOTE=utu;122417
Edit /etc/xdg/lxsession/LXDE/autostart
such that the @pcmanfm line reads @pcmanfm --desktop
That is, delete the --profile LXDE.
.[/QUOTE]
This worked like a charm for me
I opened the autostart file in LeafPad but when I try to save the edited file back into LXDE I get the message 'can't open file to write'. Anyone help me out?
... you must be root to change this file. Start with 'Run' and type 'gksu leafpad'.
Greetings Werner * http://www.wp-schulz.de/knoppix/summary.html
"Build personal Recovery-CD with Knoppix (Knoppix remaster)"
Thanks Werner
The problem which initially defined this thread
has been corrected in Knoppix 6.4.4.
Supermicro 4U 36 Bay Storage Server 2.2Ghz 16-C 128GB 1x1280W Rails TrueNAS ZFS
$725.06
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2612.18
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
1U Server (6-8 VM's) Vsphere VPS Short Depth 20" XEON 3.5Ghz 32GB RAM X10SLM-F
$199.00
Supermicro 2U X11DPU 2x Xeon Gold 6132 2.6GHz / 128gb / 12x Trays / S3108L-H8ir
$749.99