-
New to Linux/Knoppix-confused on saving configuration
A newbie to linux/knoppix, I have recently purchased a DVD system with Knoppix 6.2.1 and it works great and it appears to be using the LXDE desktop with the Iceweasel browser installed of which I am using at this time. My problem is how to save all that I have configured to get to this point. When I quit, logout or whatever it's gone. I understand that I must perform some operation to save it but am confused about that.
-
Senior Member
registered user
Here are two thoughts for you, webtek.
1. Do a forum search using the keyword 'persistent'. See what Krishna.Murphy,
Klaus2008, Harry Kuhman, Capricorny and KL522 have to say about the
subject of 'persistent store'.
2. If you have a USB Flash disk of 2Gb or greater,
try out the Knoppix Live DVD Preferences menu option for
'Install to Flash Disk'. Then on first boot of the Live Flash Disk,
take the option to create persistent storage.
-
Thanks for the reply. I have just done the 'Install to Flash Disk' on a 4GB Flash Drive via the Preferences menu and then booted from the USB Flash drive as recommended but never seen anything about an option to create a persistent image during the boot up.
webtek
-
Senior Member
registered user
In my case, until so established, there was a prompt for a few seconds
at each LiveUSB boot that Knoppix would ask how many Mbs to set aside for
persistent store. In your case, probably around 3000. The prompt only
stays on the screen a few seconds. Look close next boot, maybe you are
just missing your cue here.
-
Senior Member
registered user
@webtek:
I think that there is not enough free space left on the USB Flash device to create a persistent image. If you want to install the Knoppix DVD on a USB Flash drive then you need one that is larger than 4 GB. I think that you should open a terminal and issue This command will show you how much disk space is already used on your drives.
-
Senior Member
registered user
Hi, Klaus. Happy New Year.
I only use a 2 Gb SD Card, and 1181 Mb goes to persistent store.
I made my USB from a Knoppix CD, not a DVD if that matters.
No troubles this way for over 6 months with 6.2.1.
-
Senior Member
registered user
Hi, utu. I wish you a happy new year, too.
The size of the large KNOPPIX file on the DVD is 3900339847 bytes (3.6 GB).
The size of the large KNOPPIX file on the CD is 681.7 MB.
I have got a 4 GB USB flash device with a capacity of 4110417920 bytes. If I would install the Knoppix 6.2.1 DVD on that USB Flash drive, there were less than 200 MB free for the persistent store. 200 MB is the minimum size for the persistent image. Therefore you need a really large flash drive if you want to install the Knoppix DVD instead of the CD and use a persistent store.
-
Senior Member
registered user
I like your explanation, Klaus.
Since webtek has a 4 Gb Card, I think now I'd advise he download a
6.4.3 Knoppix CD and give that a try, before going out and
buying a bigger Flash Disk.
I estimate there will be around 3 Gb of additional apps webtek
can bring in with Synaptic if needed using the CD and the 4 Gb card.
This would appear to be the least-cost course to get some feel
for the Knoppix-with-persistent-store experience.
-
Thanks to all who replied. You guy's were all right on as the problem was that my 4GB didn't have enough memory left for the persistent file , it showed only 90MB available. I switched to a larger 16GB that I have and everything works as advertised and we now have persitance. The only problem left now is that my computer won't boot off of the large 16GB flash drive so I get around that by booting with the DVD and at the first KNOPPIX screen boot prompt I do a, knoppix fromhd=/dev/sdb1 and then it loads from the flash drive OK. webtek
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports picture](/store/img/g/fxsAAOSwZD5l6PSG/s-l225/1U-BareMetal-pfsense-opnsense-Router-Firewall-DNS-.jpg)
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
![POGO Linux WEBWARE 1150 Rack-Mount Server Pentium 4 2.8GHz 512MB - No Drives picture](/store/img/g/87EAAOSwtM5jMyRz/s-l225/POGO-Linux-WEBWARE-1150-Rack-Mount-Server-Pentium-.jpg)
POGO Linux WEBWARE 1150 Rack-Mount Server Pentium 4 2.8GHz 512MB - No Drives
$152.99
![Dell PowerEdge R210 II Rackmount Server Xeon E31220L 16Gb 1TB + 500GB LINUX 6.6 picture](/store/img/g/v-EAAOSwjuZmMTyR/s-l225/Dell-PowerEdge-R210-II-Rackmount-Server-Xeon-E3122.jpg)
Dell PowerEdge R210 II Rackmount Server Xeon E31220L 16Gb 1TB + 500GB LINUX 6.6
$129.00
![Globalscale Technologies DreamPlug AppNeta M22 Linux Server Dual GB Ethernet picture](/store/img/g/Xs4AAOSwjrlkdWYQ/s-l225/Globalscale-Technologies-DreamPlug-AppNeta-M22-Lin.jpg)
Globalscale Technologies DreamPlug AppNeta M22 Linux Server Dual GB Ethernet
$24.99
![6x Fedora Linux Computer Sticker Decals Desktop Laptop Server Badge Decal Vinyl picture](/store/img/g/G40AAOSwF8xl3jgT/s-l225/6x-Fedora-Linux-Computer-Sticker-Decals-Desktop-La.jpg)
6x Fedora Linux Computer Sticker Decals Desktop Laptop Server Badge Decal Vinyl
$2.99
![PFSENSE 15](/store/img/g/uCMAAOSw3xhj3a06/s-l225/PFSENSE-15-Depth-Server-Supermicro-X11SSH-F-E3-124.jpg)
PFSENSE 15" Depth Server Supermicro X11SSH-F E3-1240 V5 V6 - 128GB NVME 32GB RAM
$359.00
![1U 10 SFF Bay Supermicro Server X10DRW-iT 2x Xeon E5-2690 V4 128GB DDR4 RAM picture](/store/img/g/IxIAAOSwL5NjRJXz/s-l225/1U-10-SFF-Bay-Supermicro-Server-X10DRW-iT-2x-Xeon-.jpg)
1U 10 SFF Bay Supermicro Server X10DRW-iT 2x Xeon E5-2690 V4 128GB DDR4 RAM
$399.00
![IBM E850 Power8 2x 12C 3.02GHz 512Gb 1.8Tb SAS 10GbE 16Gb Linux Server 8408-E8E picture](/store/img/g/KKAAAOSwY09l8MCO/s-l225/IBM-E850-Power8-2x-12C-3-02GHz-512Gb-1-8Tb-SAS-10G.jpg)
IBM E850 Power8 2x 12C 3.02GHz 512Gb 1.8Tb SAS 10GbE 16Gb Linux Server 8408-E8E
$899.95
![VPS Windows / Linux Server - 12GB RAM, 4 Core, 1 TB HD, Unltd. bandwidth 1 Year picture](/store/img/g/BvgAAOSwxVReHqHl/s-l225/VPS-Windows-Linux-Server-12GB-RAM-4-Core-1-TB-HD-U.jpg)
VPS Windows / Linux Server - 12GB RAM, 4 Core, 1 TB HD, Unltd. bandwidth 1 Year
$278.84
![SQL Server 2019 Standard (10 CAL) - Windows and Linux, Physical License picture](/store/img/g/ArsAAOSwK8hmckYN/s-l225/SQL-Server-2019-Standard-10-CAL-Windows-and-Linux-.jpg)
SQL Server 2019 Standard (10 CAL) - Windows and Linux, Physical License
$249.00