Results 1 to 3 of 3

Thread: 6.4.3 not as good as 5.3.1

  1. #1
    Member registered user
    Join Date
    Dec 2006
    Posts
    49

    6.4.3 not as good as 5.3.1

    Oh dear, after the disappointments of 6.2.*, this latest version was so long anticipated. But at just 80% of the size of 5.3.1 things were not looking promising. Lots of shortcomings, but mainly, the lack of libreadline kills this version for me. I haven't even tried the other two main required advances: good pickup of wireless card, and smooth transition from laptop screen to external monitor even when in console mode i.e. init 2. And that ghastly startup/ shutdown voice now makes herself evident even when shutting down from init 2, which is new and very annoying when what one wants is to be sparse and discreet.
    Oh boo hoo. So 5.3.1 still rules (but definitely shows its age in some contexts).
    I know one shouldn't be critical of free software and, above all, personal effort offered gratis. Thanks so much Klaus for this and all past provision. But who complained that 5.3.1 was too big?
    By the way I can't make sense of new output provided by latest version of "fdisk -l" which now identifies weird problems with starting points of some not all partitions: i.e. all those starting with 63 sectors describing geography. Surely this is a local partition-specific architectural requirement, not a fault, and therefore should not be identified as such?
    Fergus

  2. #2
    Member registered user
    Join Date
    Feb 2008
    Posts
    31
    And still no gfortran. If the intent is to use apt-get, that assumes an internet connection, enough memory, and a bit of time. It was so nice in 5.3.1 to have everything one needs, installed and configured on a single .iso, ready for use anywhere.

    It is convenient to have a file small enough to store in a FAT filesystem (4 Gb), but that is not worth sacrificing important tools.
    Last edited by carolus; 12-31-2010 at 10:17 PM. Reason: error in units

  3. #3
    Junior Member registered user
    Join Date
    Oct 2008
    Posts
    13
    You can change the startup and shutdown sounds by replacing the files

    /usr/share/sounds/startup.ogg
    and
    /usr/share/sounds/shutdown.ogg

    with your own chosen files, and have it stored to a persistent medium.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch picture

Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch

$30.00



JUNIPER ELECTRONICS NFX250-ATT-LS1 picture

JUNIPER ELECTRONICS NFX250-ATT-LS1

$250.00



Juniper Networks EX2200-C-12P-2G Gigabit Ethernet Managed Switch w/ Rack Mounts picture

Juniper Networks EX2200-C-12P-2G Gigabit Ethernet Managed Switch w/ Rack Mounts

$74.99



Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch picture

Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch

$59.95



Juniper EX3300-48P 48-Port 10/100/1000BASE-T (48 PoE+ ports) with 4 SFP+ picture

Juniper EX3300-48P 48-Port 10/100/1000BASE-T (48 PoE+ ports) with 4 SFP+

$74.00



Juniper PWR-MX960-4100-AC  Juniper Networks Power Supply - 4100 Watt picture

Juniper PWR-MX960-4100-AC Juniper Networks Power Supply - 4100 Watt

$219.00



Juniper Networks SRX300 Services Gateway Firewall picture

Juniper Networks SRX300 Services Gateway Firewall

$92.00



Juniper 48-Port PoE GbE Network Switch w/ 4-Port 10GB SFP+ Module EX4300-48P picture

Juniper 48-Port PoE GbE Network Switch w/ 4-Port 10GB SFP+ Module EX4300-48P

$179.99



Juniper Networks EX2300-C-12T Compact 12-Port EX2300-C Series Ethernet Switch picture

Juniper Networks EX2300-C-12T Compact 12-Port EX2300-C Series Ethernet Switch

$300.00



Juniper Networks SRX220 8-Port Gigabit Services Gateway Security Appliance picture

Juniper Networks SRX220 8-Port Gigabit Services Gateway Security Appliance

$45.00