Technically interesting but it's academic. I don't see any reason why you should install it that way - except just to challenge your ownself. What's the difference if you install the usual way by copying the KNOPPIX directory ?
Hi you all,
I have been fighting a few days with a variant of the current problem, so I share it with you.
My aim is to boot from ISO the latest Knoppix version. This ISO hold on a usb 320 GB external disk with several partitions.
The only way I managed to boot Knoppix 6.4.3 from this disk (/dev/sdb) was to create a suitable size partition (/dev/sdb8 and then cat KNOPPIX_V6.4.3DVD-2010-21-20-EN.iso > /dev/sdb8
booting with gujin as bootloader it works fine.
However I don't want to waste a partition for KNOPPIX and I'd like to boot it straight from the ISO image.
my USB HDD has FAT (/dev/sdb2) NTFS (/dev/sdb3) ext2 (/dev/sdb6) partitions and I can place the ISO on anyone.
I made some attempts using GRUB2 (I can also boot from grub4dos) but unsuccessfully (basically the iso image is not found and the boot process drops to prompt)
this is grub.cfg entry
you can see I extracted linux and minirt.gz from the ISO and placed on /boot/isolinux in order to fire itmenuentry 'KNOPPIX' {
set root='(hd0,7)'
#loopback loop /KNOPPIX_V6.4.3DVD-2010-12-20-EN.iso
linux (hd0,6)/boot/isolinux/linux desktop=gnome bootfrom=/dev/sda7/boot/isolinux/*.iso config=scan home=scan ramdisk_size=100000 init=/etc/init lang=it vt.default_utf8=0 apm=power-off BOOT_IMAGE=KNOPPIX
video=vga16fboff nomce loglevel=1 tz=localtime
initrd (hd0,6)/boot/isolinux/minirt.gz
}
Anyone can help me ?
Thanks in advance
benny
Technically interesting but it's academic. I don't see any reason why you should install it that way - except just to challenge your ownself. What's the difference if you install the usual way by copying the KNOPPIX directory ?
Thanks for your answer. The reason is not acadamic, but simply I don't manage to make it working.
maybe it is because of the complex environment (Gujin on MBR and additional chained bootloaders) or my pc bios which does not show the USB disk mapping.
I do manage to boot KNOPPIX if it is on the local disk by adding this entry to 40_custom
but on the USB disk it does not work.menuentry "KNOPPIX LXDE" {
set root=(hd0,2)
linux /KNOPPIX/linux boot=/dev/sda2/KNOPPIX/KNOPPIX ramdisk_size=100000 lang=it vt.default_utf8=0 nohome apm=power-off vga=normal norandr xmodule=vga nomce loglevel=1 tz=Europe/Rome
initrd /KNOPPIX/minirt.gz
}
<span style="background-color: #99FF99;">Thanks kl522,
that's not academic as I cannot boot KNOPPIX on my USB driver with the described tecnique. I wish I could.
Actually I can succeed copying KNOPPIX, linux and minirt.gz on a NTFS partition of my INTERNAL DISK the three files are fired with this 40_custom grub2 entry:
no success on USB drive instead.</span>menuentry "KNOPPIX LXDE" {
set root=(hd0,2)
linux /KNOPPIX/linux boot=/dev/sda2/KNOPPIX/KNOPPIX ramdisk_size=100000 lang=it vt.default_utf8=0 nohome apm=power-off vga=normal norandr xmodule=vga nomce loglevel=1 tz=Europe/Rome
initrd /KNOPPIX/minirt.gz
}
kl522, I followed your criticism and I moved the same working configuration from the internal HDD to the USB drive to the NTFS partition (the former was ext2) and I can boot KNOPPIX finally.
If I add the cheatcode desktop=kde I get the following error: "Call to lnusertemp failed (temporary directories full ?) Check your installation"
can you suggest a working set of cheatcodes for kde ? gnome and lxde work fine.
thanks again
benny
Sorry can't really answer your desktop problem as I don't use kde. I only use lxde, that also I am half cooked as far as the knowledge of desktop is concerned.
However I do want to highlight that as far as I know KNOPPIX has a serious shutdown problem, especially NTFS, based on my knowledge of knoppix 6.2.1/6.3. I believe it's the same for knoppix 6.4.3. I did do some post here but unfortunately nobody seems to be thinking the same as me. But there again, this is just my personal view, others may feel differently.
I like LXDE and GNOME less KDE, but I cannot live with an issue without knowing the root cause and maybe the solution. In this case I feel positive to boot native KDE to try k* applications like kmail and discover them. I also like such a distribution which is comprehensive of several desktop environments you can choose and so full of applications.
I'd like also to use the same persistency I use for ubuntu based distributions: I have a partition called home-rw which is mounted as \home. Do you think it is possible also for KNOPPIX something like home=/dev/sdb8/KNOPPIX ? (I read some warnings on it and I am afraid to destroy the content)
shutdonwn is OK for me
regards
benny
HyperX FURY DDR4 16GB 32GB 64GB 2666MHz PC4-21300 Desktop RAM Memory DIMM 288Pin
$119.80
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Team T-FORCE VULCAN Z 16GB (2 x 8GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) XMP
$35.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
8GB PC3L-12800S 1600MHz SODIMM DDR3 RAM | Grade A
$12.00
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$21.50
Crucial 16GB (2x 8GB) Kit DDR3L 1600MHz PC3-12800 UDIMM Desktop 240-Pin CL11 RAM
$23.33
CORSAIR Vengeance RGB Pro 32GB (2 x 16GB) 288-Pin PC RAM DDR4 3600 (PC4 28800)
$79.95
HyperX FURY DDR4 16GB 3200 MHz PC4-25600 Desktop RAM Memory DIMM 288pin 2x 16GB
$127.20
A-Tech 64GB 4x 16GB 2Rx4 PC4-17000R DDR4 2133MHz ECC REG RDIMM Server Memory RAM
$87.96