Results 1 to 8 of 8

Thread: ignore video card?

  1. #1
    Junior Member
    Join Date
    Jan 2011
    Posts
    7

    ignore video card?

    Hello,
    I have a Dell laptop with a dead graphics card. When I boot from DVD, Knoppix seems to be fine until it tries to start X. Then it hangs. I've tried some cheat codes including vga=normal, but no success. I suspect that the dead graphics card is the problem. (Since it is a laptop, it is not really reasonable to remove it.) Is there a way to tell Knoppix to ignore the video card and just use the motherboard graphics?

    Thanks.

  2. #2
    Senior Member registered user
    Join Date
    Mar 2004
    Posts
    1,516
    uhm, what? dead? if you can see graphics when starting knoppix you are likely using that very graphics card, if not some special thing for external TV or something.
    uhm try "knoppix 2" for start, that will put you in console mode (text only).

  3. #3
    Senior Member registered user
    Join Date
    Mar 2004
    Posts
    1,516
    oh, another thing, it MAY be that the "memory" is dead on that card, that would make it hard to work with. check BIOS setting if there is some setting that allows it to use the first 16M only or something (seen one old laptop that had that setting)

  4. #4
    Junior Member
    Join Date
    Jan 2011
    Posts
    7
    Quote Originally Posted by OErjan View Post
    uhm, what? dead? if you can see graphics when starting knoppix you are likely using that very graphics card, if not some special thing for external TV or something.
    uhm try "knoppix 2" for start, that will put you in console mode (text only).
    Thanks for replying.

    Perhaps dead is going a bit far. However, it doesn't work right any more. It won't get through a bootup unless it is disabled. Apparently Dell/Nvidia had a problem with graphics cards overheating and failing. Anyway, if I tell Windows not to use the graphics board, then it works relatively ok for most purposes. As near as I can tell, laptop motherboards are like normal ones in that they come with onboard graphics. I want Knoppix to use that instead of the graphics card.

    I would just remove the graphics card, but it has a heat sink that apparently runs through the laptop such that you almost have to disassemble the whole laptop to remove it.

  5. #5
    Moderator Moderator
    Join Date
    Jan 2010
    Location
    Asheville, NC, USA
    Posts
    528
    What version of Knoppix are you using? And which laptop and/or video adapter? There is some issue with the latest version (6.4.3) and Nvidia, it seems. The issue of switching to another internal/onboard adapter would be in the BIOS settings, most likely.

    Hope that helps!
    Krishna

  6. #6
    Junior Member
    Join Date
    Jan 2011
    Posts
    7
    Knoppix v6.4.3. I tried one of the v5 Knoppixes too with the same result.

    Inspiron 7000 with Nvidia GeForce Go 7900 GTX.

    Since you suggested BIOS, I looked and found a setting that might work. I tried it, but it didn't work either. I haven't tried the cheat code tricks yet though.

    Thanks.

  7. #7
    Junior Member
    Join Date
    Mar 2011
    Posts
    1

    Knoppix 6.4.4 DVD and NVidia woes

    <span style="background-color: #99FF99;">I've got the fated combination and was wondering if you knew of anything I could do about it. The graphics and xserver seem to start ok but the display is garbled with offset columns and crap. I tried 2 monitors with the same results. The actual machine is an Acer Aspire (AST180-UA380B). Lspci gives me:

    00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
    00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
    00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
    00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
    00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
    00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3)
    00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1)
    00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
    00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
    00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
    00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
    00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
    00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2)
    00:0d.0 VGA compatible controller: nVidia Corporation GeForce 6100 nForce 405 (rev a2)
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control

    Thanks!
    Philip

    Quote Originally Posted by krishna.murphy View Post
    What version of Knoppix are you using? And which laptop and/or video adapter? There is some issue with the latest version (6.4.3) and Nvidia, it seems. The issue of switching to another internal/onboard adapter would be in the BIOS settings, most likely.

    Hope that helps!
    Krishna
    </span>

  8. #8
    Junior Member
    Join Date
    Dec 2011
    Posts
    1

    Solve garbled or scrambled video on ATI / Radeon / AMD graphic cards

    Had the same problem on a computer with an Asrock mobo with AMD 880G chipset. Knoppix LiveCD started allright, but ended with a garbled or scrambled screen.
    If the first bit starts up OK with text mode screens, then wait until you see 'Boot: '
    There it waits a couple of seconds, so you can enter something (namely, cheat codes...).
    After 'Boot: ' you type 'knoppix nomodeset' and press <enter>
    Solved the problem for me!

    I've put in a lot of keywords in this message so it may be found better by search machines.
    Also, I described the procedure, it took some time before I found that out!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Seagate 10TB 7200RPM 12Gbps 3.5in SAS Hard Drive ST10000NM096 picture

Seagate 10TB 7200RPM 12Gbps 3.5in SAS Hard Drive ST10000NM096

$79.99



Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5

Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive

$29.99



Dell ST2000NX0403 2T SATA 2.5 inch 7.2K CK3MN server hard drive picture

Dell ST2000NX0403 2T SATA 2.5 inch 7.2K CK3MN server hard drive

$45.00



Toshiba 4TB, SATA 3, 3.5'' Internal Hard Drive (MG03ACA400) picture

Toshiba 4TB, SATA 3, 3.5'' Internal Hard Drive (MG03ACA400)

$48.00



HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5

HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601

$89.99



Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5

Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive

$93.88



Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5

Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive

$99.99



HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5

HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD

$69.99



Western Digital WD10JUCT 1TB 2.5

Western Digital WD10JUCT 1TB 2.5" SATA 3Gb/s 5400 RPM 16MB Laptop Hard Drive

$17.98



HGST 0F27352 10TB 3.5

HGST 0F27352 10TB 3.5" SAS 7200 RPM 12Gb/s Hard Drive 100% #73 v

$65.00