Results 1 to 9 of 9

Thread: dpkg: warning: files list file for package missing, as assuming package has ....

  1. #1
    Senior Member
    Join Date
    Jan 2011
    Posts
    123

    dpkg: warning: files list file for package missing, as assuming package has ....

    as soon as I apt-get install something a whole bunch of those errors pops up.
    Luckely those installs do succeed.
    I can fix the problems by doing a apt-get remove && apt-get install for every package but this is a very time consuming job as you can imagine...

    Is there any magic command I can try?
    I did:
    apt-get autoremove
    apt-get clean
    apt-get autoclean
    aptitude reinstall '~i'
    ....

    none fixed the problem
    Are those errors serious?
    and I did googled, but help on those forums was no real help to be honest
    I am running knoppix 6.4.3 (cd) on a usb. I think I screwed up somewhere while remastering but now I copied forester's script and did some changes, no trouble while remastering anymore

  2. #2
    Senior Member
    Join Date
    Jan 2011
    Posts
    242
    dinoseopje, what are you trying to do now ?

    I am guessing you want to install some software ? I'm guessing the warnings you are getting is trying to tell you Knoppix's view of the repository is out of date. If your using 6.4.3. then it is about two months out of date. Hundreds of package has been modified. If you install this way you risk dependency problems that could render your Knoppix inoperable.

    Did you start with
    Code:
    sudo apt-get update
    ?

    That will update your package list for you.

    Warning:
    when I did this, the new package list database swallowed 200 Mb of my preciously small knoppix-data.img.

    Viel glück and all that.

  3. #3
    Senior Member
    Join Date
    Jan 2011
    Posts
    123
    after an apt-get update the problem persisted
    I am guessing dpkg keeps a list of all installed packages and that I copied in a remaster the wrong /var folder to the new knoppix file so the file is completely out of sync with what I have installed.
    or I removed a bit to much with bleachbit

    I have also tried
    apt-get update
    apt-get upgrade
    apt-get dist-upgrade
    ...

    Can I still repair my screwup?

  4. #4
    Moderator Moderator
    Join Date
    Jan 2010
    Location
    Asheville, NC, USA
    Posts
    528
    There's always the "Delete the knoppix-data.* and start over" method, if nothing else works. There are many front-ends for apt/dpkg, which have differing capabilities. I have had some good results with aptitude from the command line. Don't forget to prefix your command with sudo! Or you can "sudo su" and become root.

    Cheers!
    Krishna
    Last edited by krishna.murphy; 02-22-2011 at 11:29 PM. Reason: typo

  5. #5
    Senior Member
    Join Date
    Jan 2011
    Posts
    242
    Oh dear.

    Kishna has a point.

    You still have not told us what you were trying to do and what you did to get into this mess.

    All you done is give is a list of things you already tried to get out of the mess, most of which may have just made things worse. Why you expect anyone to be able to help ?

    Try:

    Code:
    sudo rm -fr /KNOPPIX-DATA/var/lib/apt/lists/*
    sudo apt-get update

  6. #6
    Senior Member
    Join Date
    Jan 2011
    Posts
    123
    I don't really know how I got into the mess,could be a lot of things.
    the problem isn't in knoppix-data anymore because I needed to remaster to a squashfs file.

    It happens when I do an apt-get install. I've continued to just apt-get install packagename --reinstall everything, that solves my problem but it's a lot of work.

  7. #7
    Senior Member
    Join Date
    Jan 2011
    Posts
    123
    update: I have reinstalled all 'problem packages' and now I do not see errors popping up while using apt-get install
    now just wait and see what happens next

  8. #8
    Senior Member
    Join Date
    Jan 2011
    Posts
    242
    Dear Dino,

    I've not messed up apt this way so I can't advise on how to get out of the mess. All I can do is guess and probably guess wrong.

    If you think your problem comes from the way your remastered then you really should revert back to before you did the remaster and move forward from there. You should back up /home somewhere just in case.

    When you remaster, you should keep all modifications to /home, /var and probably /etc in knoppix-data.img and not remaster these directories but keep what was originally on the CD.

    I appreciate that that might mean going back to square one and installing to USB again but going forwards by doing a lot of reinstalling packages takes you into unknown territory.

    Put it bluntly, next time you have ask a question about bizarre behaviour on your system, folks are likely to reply something along the lines of "What do you expect" or "I told you so" or "I can't help" or "You're on your own" or "Good luck with that mate" or just a long line of unkind smilies.

    Look on the bright side - you can start again with Knoppix 6.4.4 so not so many packages will be 'out of date' with respect to the Debian repository.

  9. #9
    Senior Member
    Join Date
    Jan 2011
    Posts
    123
    yeah, I think your true.
    I'm going to use another memorycard and slowly try to setup knoppix 6.4.4 the way I want it to be.
    That way I have a correct system again

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA picture

LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA

$229.99



IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets picture

IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets

$139.00



XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT picture

XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT

$59.00



HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039 picture

HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039

$116.99



Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE picture

Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE

$15.98



LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License picture

LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License

$39.95



ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs picture

ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs

$87.99



Dell PowerEdge RAID Controller HBA330 12Gbs PCIe 3.0 SAS SATA J7TNV Low Profile picture

Dell PowerEdge RAID Controller HBA330 12Gbs PCIe 3.0 SAS SATA J7TNV Low Profile

$29.00



4 Bay RAID External Hard Drive Enclosure for 2.5/3.5

4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD

$79.99



G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply picture

G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply

$99.99