-
Senior Member
registered user
Can we speed up Network Manager?
My Windows 7 boots to wi-fi on-line in ~60 seconds.
My Knoppix 6.4.4 LiveUSB does so in 1m46s.
Looking at syslog, it appears that the last 48 seconds
of any boot-up are spent doing Network Manager negotiations.
NM is doing its job here, but doesn't seem as clever as
Win7 in getting its job done; certainly not as fast.
In my case, wi-fi means a Dell internal Broadcom wireless
with a (non-free) wl driver, a DHCP router connected
to the internet via Verizon FiOS at 15 Mb/s. Simple
WEP security. Applet says NM is version 0.8.1.
I have an external wireless adapter that doesn't use a
non-free driver, and get the same results.
Are there some tweaks that would speed up NM?
-
Senior Member
registered user
Well, thank you all for your suggestions.
Here's how far I've got, and I'm open for further enhancements.
1...I found this nice Ubuntu How-To which helps a lot:
http://ubuntuforums.org/showthread.php?t=684495
2...I did what it says, and put, as root, this in my /etc/rc.local:
sudo dhclient -r eth1
sudo ifconfig eth1 up
sudo iwconfig eth1 essid "alpha=num essid"
sudo iwconfig eth1 key "10 char hex key"
#sudo iwconfig eth1 key open # didn't need this apparently
sudo iwconfig eth1 mode Managed
sudo dhclient eth1
3...I revised my LiveUSB DEFAULT, as root, to read:
DEFAULT knoppix nonetworkmanager edd=off fromhd=/dev/sdb1
That's the 1st line in /Desktop/KNOPPIX/boot/syslinux/syslinux.cfg
4...Rebooted.
5...Did less /var/log/syslog.
Found that start-of-boot to wi-fi on-line now takes 58 seconds.
Beat that.
-
Originally Posted by
utu
Well, thank you all for your suggestions.
What ? Deprive you of your learning opportunity ? In my book that's a cardinal sin.
Besides, if I suggested that the best way of speeding up the Network Manager was to not run the Network Manager I'd have had klaus2008 down on my tail (http://www.knoppix.net/forum/threads...ot-in-Adrianne).
Originally Posted by
utu
http://wiki.debian.org/WiFi
http://wiki.debian.org/WiFi/HowToUse
You managed to find a real hacker's hacker - he didn't mention /etc/networks/interfaces once ! You then come up with a solution that names your wireless interface eth1 instead of the usual wlan0. Extra marks.
Here's what the Debian installer put in my /etc/networks/interfaces to bring up my wifi with WEP:
Code:
# The primary network interface
allow-hotplug wlan0
iface wlan0 inet dhcp
# wireless-* options are implemented by the wireless-tools package
wireless-mode managed
wireless-essid MyEssid
wireless-key1 **********
It is my understanding that with this the most you would need in /etc/rc.local is:
and you might not even need that.
Ever since I first met the wonderful Network Manager, I've had a manual way of getting my wireless going just in case. I normally use WPA PSK2. If my WPA PSK2 configuration is hidden away in:
Code:
/etc/wpa_supplicant.conf
Then I can start my wireless by hand with:
Code:
sudo wpa_supplicant -B -c/etc/wpa_supplicant.conf -iwlan0
sudo dhclient
How many sudos did you use ? BTW I don't think you need sudo in /etc/.rc.local.
I found recently that I can combine the two approaches with:
Code:
# The primary network interface
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant.conf
The problem with the Network Manager is not just that it is started when your PC / LT is busy starting everything else, it's not just that the Network Manager is a big desktop app, it's not just that the LXNetMan is still 'in development'. It's that the Network Manager does not try to connect until you login in. This is not obvious with Knoppix but if you try it on a real desktop installation you'll see what I mean. Thus the Network Manager starts connecting very late in the startup sequence so it appears slower that Windoze.
By connecting without the Network Manager, you starting connecting much earlier in the startup sequence. The cost is that you must already know which network you want to connect to. This may not be a concern to you but for those that carry their laptop round like security blankets and use them everywhere like they were mobiles (or handys or cells), this could be a real drawback.
Enter wicd. This is a new, ligthweight, alternative to the Network Manager. It is not as flash as the Network Manager but I understand it will connect in both GUI and console modes. This leads me to believe it must be possible to start it much earlier in the start up sequence.
I have it running on one Debian laptop but I don't have the time to experiment with it any further. You might like to. If your name is dinoesep, back up your knoppix-data.img first 'cos I think you'll need to uninstall Network Manager in order to install wicd. Obviously, start your network first !
Cheers
Last edited by Forester; 03-05-2011 at 01:45 PM.
-
Senior Member
registered user
Faint praise accepted.
I never uninstalled NM, just added nonetworkmanager cheatcode to my DEFAULT;
see step 3.
Also, my /etc/rc.local belongs to root.
-
Senior Member
registered user
Heres' my latest. On-line now in 50 seconds.
#!/bin/bash
# /etc/rc.local (mine is root:root and executable)
# other stuff(1)
setwifi () { # see http://ubuntuforums.org/showthread.php?t=684495
WIFI="eth1"; dhclient -r $WIFI; ifconfig $WIFI up
iwconfig $WIFI essid "(alphanumeric ssid)" key "(hexadecimal wep)" mode "Managed"
nohup dhclient $WIFI; wait >/dev/null 2>&1
aplay -vv /usr/lib/libreoffice/basis3.3/share/gallery/sounds/ok.wav
}
# other stuff
setwifi(2)
# other stuff(2)
exit 0
-
Senior Member
registered user
FYI, Here's how I've been timing these results.
I've added these to my .bashrc:
alias wl.go='less /var/log/syslog|grep restart|cut -c11-16'
alias wl.up='less /var/log/syslog|grep renewal|cut -c11-16'
So right after booting up, I can time the event this way:
knoppix@Microknoppix:~$ wl.up; wl.go
57:17
56:27
I do the subtraction myself, of course.
Glad to have an expert show me how to program that detail
-
Senior Member
registered user
Heres' my latest. On-line now in 50 seconds.
#!/bin/bash
# /etc/rc.local (mine is root:root and executable)
# other stuff(1)
setwifi () { # see http://ubuntuforums.org/showthread.php?t=684495
WIFI="eth1"; dhclient -r $WIFI; ifconfig $WIFI up
iwconfig $WIFI essid "(alphanumeric ssid)" key "(hexadecimal wep)" mode "Managed"
nohup dhclient $WIFI; wait >/dev/null 2>&1
aplay -vv /usr/lib/libreoffice/basis3.3/share/gallery/sounds/ok.wav
}
# other stuff(2)
setwifi
# other stuff(3)
exit 0
Last edited by utu; 06-13-2011 at 12:39 AM.
Reason: correct typos in post #5
-
Senior Member
registered user
If you are concerned about security, NEVER NEVER NEVER used wep.
WEP can be cracked in about 5-30 minutes, does not matter how long your password/passhrase.
-
You should fiddle around in knoppix-autoconfigure to replace the original network manager with wicd like I did, it's described somewhere in a post.
I have the feeling its under 60 seconds but maybe thats just me.
-
Originally Posted by
utu
Heres' my latest. On-line now in 50 seconds.
#!/bin/bash
# /etc/rc.local (mine is root:root and executable)
# other stuff(1)
setwifi () { # see
http://ubuntuforums.org/showthread.php?t=684495
WIFI="eth1"; dhclient -r $WIFI; ifconfig $WIFI up
iwconfig $WIFI essid "(alphanumeric ssid)" key "(hexadecimal wep)" mode "Managed"
nohup dhclient $WIFI; wait >/dev/null 2>&1
aplay -vv /usr/lib/libreoffice/basis3.3/share/gallery/sounds/ok.wav
}
# other stuff(2)
setwifi
# other stuff(3)
exit 0
Dear utu:
Q: Which version's of knoppix is this script compatible?
I'm interested using WLAN CLI alternatives to the bloated network-manager GUI w/7.0.3!
Regards,
luther
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
DELL PowerEdge R730XD Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45
$267.00
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD 
$180.00
Dell Poweredge R730xd 12 Bay LFF 2x SFF 2x E5-2680v3 2.5ghz H730p No Ram No HDD
$219.99
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$44.99
DELL PowerEdge R630 8SFF Server 2x E5-2680v4 2.4GHz =28 Cores 128GB H730 4xRJ45
$346.00
DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$226.00