-
Editing "Read Only files"
I am a Newbie to the Linux world and am trying to set up Knoppix 6.4.3 on my Acer Aspire 3000 Laptop.
Everything works OK with the exception of my wireless system which seems to point to the Broadcom Bcm 4318 wireless adapter and it appears that the fix is to edit the configuration file, broadcom-sta-common.conf, located at /etc/modprobe.d and to comment out the 'blacklist b43' statement in the file. I have arrived at that point and am unable to edit the file as it is 'Read Only' and I have been unable to write to it.
How does one change the permissions to overcome this? My Knoppix has been installed to a USB 4GB flash drive via the procedure in Preferences, "Install KNOPPIX to flash disk".
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$226.00
Cisco UCS C240 M4 2U Server w/ 2x E5-2680v4, NO RAM
$49.99
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Lenovo ThinkServer TS140 Xeon E3-1225v3 3.20GHz 16GB RAM Tower Server Needs HDD
$99.99
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$139.99
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99
Gigabyte 2U Server 2x E5-2698 v3 128gb 12x 3.5 12G 9362-8i 14x Trays Rails
$394.99