ps
.
It may be that quotes are necessary for the statements.
Here's mine:
Code:# $Id: 15x11-synaptics $ # This file is sourced by Xsession(5), not executed. # Disable built-in Touchpad. # synclient "TouchpadOff=1" #
g'day, Peter.
You probably know this, but:
Just to make sure, 15x11-snaptics properties may need to be root:root.
Mine are.
ps
.
It may be that quotes are necessary for the statements.
Here's mine:
Code:# $Id: 15x11-synaptics $ # This file is sourced by Xsession(5), not executed. # Disable built-in Touchpad. # synclient "TouchpadOff=1" #
Another approach might be to take your script and add it to /etc/rc.local.
This file should also be root:root AND executable. We really should see your script
before you do this.
But I am surprised the Xsession.d approach doesn't work for you.
Let us know how it goes in any event.
Can't really put that in /etc/rc.local because the program synclient need to contact the X server.
OK there is some further details need to take note about the script synclient, there must be no spaces between the equal sign, the quotes are optional however :-
synclient TouchpadOff=1 - works
synclient TouchpadOff =1 - does not work
synclient TouchpadOff = 1 - does not work
synclient "TouchpadOff=1" - works
Because when you open an xterminal, there is an environment variable called DISPLAY.
$ echo $DISPLAY
:0
$ set | grep DISPLAY
DISPLAY=:0
However, when you run it in rc, the DISPLAY is not set, so synclient does not know which Xserver DISPLAY you are talking about.
$ unset DISPLAY
$ synclient -l
Failed to connect to X server
Hey fellas, this is the script I wrote, saved as the executable file called touchpad on my system at /home/knoppixsorry, the formatting is scrambling the message, hence at carriage return Also the reference to root:root - is that sudo su? thanks, Peter PerrosCode:#!/bin/bash synclient TapButton1=1 synclient TapButton2=2 synclient TapButton3=3 synclient HorizEdgeScroll=1 synclient VertEdgeScroll=1
--------------
I formatted it for you; please use the "Go Advanced" button and then the icon to insert code. Greetings Werner
Last edited by Werner P. Schulz; 03-13-2012 at 08:51 AM. Reason: formatted by moderator
Hey guys,
I think life would be a lot easier if Knoppix could emulate the touchpad support of Linux Mint 12 LXDE.
I really can't spend more time on this. I really want something that is easy to use. Love the eye candy though...
Thanks guys.
Peter Perros.
HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 16GB RAM No HDD's
$299.00
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 8GB RAM No HDD's
$229.99
HP ProLiant N36L Micro Server 633724-001 AMD Athlon II Neo N36L - No HDDs
$61.55
ProLiant MicroServer Gen8 Intel Xeon E3-1220L V2 2.3GHz CPU 8GB RAM
$170.00
HPE ProLiant MicroServer Gen 10 Plus, Xeon E-2224, 16GB DDR4, 1TB M.2 NVMe SSD
$750.00
HP ProLiant Microserver Micro Server HSTNS-5151 untested
$67.50
HPE microserver Gen8 Update Firmware iLO4 + BIOS System Latest HP Server FAST⚡️✅
$79.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server P54644001
$849.99
Supermicro A2SDi-4C-HLN4F Motherboard SYS-E200-9A 32GB ECC 250GB SSD 16GB M.2
$550.00