ps
.
It may be that quotes are necessary for the statements.
Here's mine:
Code:# $Id: 15x11-synaptics $ # This file is sourced by Xsession(5), not executed. # Disable built-in Touchpad. # synclient "TouchpadOff=1" #
g'day, Peter.
You probably know this, but:
Just to make sure, 15x11-snaptics properties may need to be root:root.
Mine are.
ps
.
It may be that quotes are necessary for the statements.
Here's mine:
Code:# $Id: 15x11-synaptics $ # This file is sourced by Xsession(5), not executed. # Disable built-in Touchpad. # synclient "TouchpadOff=1" #
Another approach might be to take your script and add it to /etc/rc.local.
This file should also be root:root AND executable. We really should see your script
before you do this.
But I am surprised the Xsession.d approach doesn't work for you.
Let us know how it goes in any event.
Can't really put that in /etc/rc.local because the program synclient need to contact the X server.
OK there is some further details need to take note about the script synclient, there must be no spaces between the equal sign, the quotes are optional however :-
synclient TouchpadOff=1 - works
synclient TouchpadOff =1 - does not work
synclient TouchpadOff = 1 - does not work
synclient "TouchpadOff=1" - works
Because when you open an xterminal, there is an environment variable called DISPLAY.
$ echo $DISPLAY
:0
$ set | grep DISPLAY
DISPLAY=:0
However, when you run it in rc, the DISPLAY is not set, so synclient does not know which Xserver DISPLAY you are talking about.
$ unset DISPLAY
$ synclient -l
Failed to connect to X server
Hey fellas, this is the script I wrote, saved as the executable file called touchpad on my system at /home/knoppixsorry, the formatting is scrambling the message, hence at carriage return Also the reference to root:root - is that sudo su? thanks, Peter PerrosCode:#!/bin/bash synclient TapButton1=1 synclient TapButton2=2 synclient TapButton3=3 synclient HorizEdgeScroll=1 synclient VertEdgeScroll=1
--------------
I formatted it for you; please use the "Go Advanced" button and then the icon to insert code. Greetings Werner
Last edited by Werner P. Schulz; 03-13-2012 at 08:51 AM. Reason: formatted by moderator
Hey guys,
I think life would be a lot easier if Knoppix could emulate the touchpad support of Linux Mint 12 LXDE.
I really can't spend more time on this. I really want something that is easy to use. Love the eye candy though...
Thanks guys.
Peter Perros.
G5T03 Dell Intel DC S3700 Series 800GB SATA 6Gb/s 2.5" SSD 0G5T03 SSDSC2BA800G3E
$55.00
HPGYT DELL 960GB SATA 6Gb/s 2.5in Internal SSD 0HPGYT MTFDDAK960TCB
$59.00
M.2 NVME SATA SSD Enclosure USB 3.2 Gen 2 10Gbps for M-Key or M+B Key SSD to 8TB
$40.86
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Micron 2300 256GB M.2 GEN 3x4 PCIe NVMe Solid State Drive 2280 SSD 00C2G4
$14.99
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$14.99
Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot
$13.99
Fanxiang 4TB 2TB 1TB SSD 550MB/s 2.5'' SATA III Internal Solid State Drive lot
$13.99
1.92TB SSD SATA 2.5 SAMSUNG MZ-7LM1T90 PM863 MZ7LM1T9HCJM Tested 93%+
$45.93
Fanxiang SSD 512GB 1TB 2TB 4TB 2.5''SATA III Internal Solid State Hard Drive LOT
$188.99