ps
.
It may be that quotes are necessary for the statements.
Here's mine:
Code:# $Id: 15x11-synaptics $ # This file is sourced by Xsession(5), not executed. # Disable built-in Touchpad. # synclient "TouchpadOff=1" #
g'day, Peter.
You probably know this, but:
Just to make sure, 15x11-snaptics properties may need to be root:root.
Mine are.
ps
.
It may be that quotes are necessary for the statements.
Here's mine:
Code:# $Id: 15x11-synaptics $ # This file is sourced by Xsession(5), not executed. # Disable built-in Touchpad. # synclient "TouchpadOff=1" #
Another approach might be to take your script and add it to /etc/rc.local.
This file should also be root:root AND executable. We really should see your script
before you do this.
But I am surprised the Xsession.d approach doesn't work for you.
Let us know how it goes in any event.
Can't really put that in /etc/rc.local because the program synclient need to contact the X server.
OK there is some further details need to take note about the script synclient, there must be no spaces between the equal sign, the quotes are optional however :-
synclient TouchpadOff=1 - works
synclient TouchpadOff =1 - does not work
synclient TouchpadOff = 1 - does not work
synclient "TouchpadOff=1" - works
Because when you open an xterminal, there is an environment variable called DISPLAY.
$ echo $DISPLAY
:0
$ set | grep DISPLAY
DISPLAY=:0
However, when you run it in rc, the DISPLAY is not set, so synclient does not know which Xserver DISPLAY you are talking about.
$ unset DISPLAY
$ synclient -l
Failed to connect to X server
Hey fellas, this is the script I wrote, saved as the executable file called touchpad on my system at /home/knoppixsorry, the formatting is scrambling the message, hence at carriage return Also the reference to root:root - is that sudo su? thanks, Peter PerrosCode:#!/bin/bash synclient TapButton1=1 synclient TapButton2=2 synclient TapButton3=3 synclient HorizEdgeScroll=1 synclient VertEdgeScroll=1
--------------
I formatted it for you; please use the "Go Advanced" button and then the icon to insert code. Greetings Werner
Last edited by Werner P. Schulz; 03-13-2012 at 08:51 AM. Reason: formatted by moderator
Hey guys,
I think life would be a lot easier if Knoppix could emulate the touchpad support of Linux Mint 12 LXDE.
I really can't spend more time on this. I really want something that is easy to use. Love the eye candy though...
Thanks guys.
Peter Perros.
Cisco QSFP-100G-LR4-S 100GBASE-LR4 QSFP28, 1310nm, 10km, LC, SMF
$335.99
Cisco Nexus (N2K-C2232PP) 32-Ports Rack-Mountable Expansion module -
$62.99
Cisco Meraki MS120-48LP 48 Port Blade Ethernet Switch UNCLAIMED
$799.00
Cisco Systems Nexus 7700 10 Slot Chassis Fab 3 Mod | N77-C7710-FAB-3
$4999.99
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$83.00
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$38.99
Cisco WS-C3850-24XUL 24 Port 10Gbps UPoE Network Switch w/ 1100W PSU +SFP Module
$550.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Cisco C9300-48 48 Port Switch Dual PSU W/C9300-NM-8X P/N: C9300-48U-A Tested
$799.99
Cisco Catalyst 3850 WS-C3850-48U-S 48-Port UPOE Gb Switch w/ NM-2-10G (BH)
$134.96