Has 7.02 solved the lack of support for touchpads?
@ Forester:
Not sure if it is of any interest but I have to tell you, yourworks on my HP Pavilion g6-1b67ca with knoppix 6.7.1 running from an USB stick flawless like a gem......take on this...
Thank you for sharing your solution with the Knoppix World!
Last edited by Karibu; 03-23-2012 at 01:42 AM. Reason: more info
Has 7.02 solved the lack of support for touchpads?
It has for me.
HP ProLiant BL460c Gen9 Blade 2x E5-2690v4 2.6GHz =28 Cores 32GB P246 650FLB
$223.00
CISCO UCSB-B200-M5 UCS B200 M5 BLADE SERVER - CAN BUILD TO SPEC
$495.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
DELL PowerEdge M630 Blade 2x E5-2680v4 2.4GHz =28 Cores 128GB H330 2x10Gb X520
$275.00
HP ProLiant BL460c Gen9 Blade Server Intel Xeon E5-2698 v3 - 512GB RAM
$255.61
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$59.99
Cisco UCSB-B200-M5 V05 Blade Server with 2x GOLD 6146, 3.2GHZ 64GB RAM, NO SSD
$649.00
Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD
$125.00
Sun Microsystems Blade 100 Workstation UltraSPARC-IIe 500MHz 256MB Server No HDD
$95.00
HP ProLiant BL460c Gen9 Blade Server 1x Xeon E5-2623 v3 3.00GHz 16GB DDR4 No HDD
$169.99