-
Senior Member
registered user
FWIW, here's my syslog-knoppix.conf
By and large it puts syslog on vt12 and in /var/log/syslog
and puts kern.log in /var/log/kern.log.
# /etc/syslog-knoppix.conf
# Configuration file for syslogd started from /etc/init.d/knoppix-autoconfig
#
# This file is here merely to avoid logging to the system console when
# programs do an openlog() with LOG_CONS, which would clutter the output for
# screenreaders. acpid is known to do that.
# Normal logging messages go to /dev/tty12, except for passwords
*.*;auth,authpriv.none /dev/tty12
# ONLY Emergency messages are allowed to go to all consoles.
*.emerg *
# Add back kern.log and syslog
kern.* /var/log/kern.log
*.*;auth,authpriv.none /var/log/syslog
-
Originally Posted by
Charlie Foxtrot
I can't boot off a DVD drive, although I do have an external DVD drive that I can read from. Can I boot off an internal CD and install packages off a DVD?
Ah .... a really old laptop. You didn't say before and I didn't ask. Sorry. I guess your laptop can't boot from USB either ? That could become a real pain 'cos you can't have persistent store and that means you'd have to reinstall rdesktop and claws each time you boot and set up your mail account again (and make sure you leave messages on the server etc.)
There are ways around that but probably the first thing to do is see about your wireless.
Originally Posted by
Charlie Foxtrot
I'd like to start a thread about my wireless problems but I can't figure out how to capture the output of the Ctrl+Alt+F12 console. The /var/log seems to be pretty empty compared to other linux distros.
The answer is in this case is to open a terminal / console and use:
to browse the kernel messages. Use return to move down a line and the space bar to move down a page.
I guess your laptop does not have a built in wireless so you are using a USB or perhaps even a PCMCIA card. Even better. Boot without your wireless, open the terminal / console, now plug in your wireless. Count to ten and print out the final lines of dmesg with:
dmesg | tail -n 25
When it all works you should see lines saying a new usb device has been plugged in, then some lines from the driver Linux loads to handle you wireless and then some lines about wlan0 as Linux tries to configure you wireless connection.
Anyway, create a new forum thread, copy and paste what you see into a first post for Knoppix 6.4.4, which doesn't work, and then do the same in a second post for Knoppix 6.2.1, which you say does work and we'll see what the differences are.
When you've time, of course. No hurry.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco GLC-FE-100LX 100BASE-LX SFP Transceiver Module
$15.59
Cisco GLC-FE-100LX-RGD 100BASE-LX SFP Transceiver Module
$17.99
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco w/ Green Hologram SFP-25G-SR-S 25G SFP28 SR 850nm 100m LC MMF
$68.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Genuine Cisco GLC-TE 30-1475-01 V01 1000BASE-T SFP COPPER RJ-45 100M TRANSCEIVER
$11.90
New HP HPE Aruba J9150D 10G SFP+ LC SR 850nm 300m MMF XCVR Transceiver Module
$49.99
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00