KNOPPIX development team:
PLEASE! PLEASE! PLEASE! PLEASE! PLEASE!
include 2.4.21 in the next Knoppix release.
Thanks,
BR
I noticed this - what would be involved in upgrading?
Would it be worth it?
Linux Kernel 2.4.21 Released
Posted by michael on Friday June 13, @01:20PM
from the load-average-increasing dept.
An anonymous reader writes "After > 6 months of waiting, 2.4.21 is here. Lots of cleanups, and a patch which gives a MAJOR boost to the 'feel' of the system under heavy disk IO, especially on IDE systems. As usual, available from your local kernel.org mirror or ftp.COUNTRYCODE.kernel.org/pub/linux/kernel/v2.4/! Tidbit: 'Current bandwidth utilization 131.72 Mbit/s '." See the Changelog for new stuff.[/quote]
KNOPPIX development team:
PLEASE! PLEASE! PLEASE! PLEASE! PLEASE!
include 2.4.21 in the next Knoppix release.
Thanks,
BR
Having installed Knoppix, is it possible / worth doing to upgrade my kernel?
It's possable.Originally Posted by Tortoise
If it aint broke, don't fix it
It's possible, but it's a pain. It'd be much easier (for me at least) to just wait for Knoppix to include it and then do a HD-Install from it.
I need it for the usbnet drivers in 2.4.21 so I can communicate between Knoppix and my Zaurus.
BR
Klaus usually waits until the final release of a kernel before incorporating it into Knoppix. Now that 2.4.21 is officially out I suspect that it will be incorporated into the next Knoppix release - which should come sometime after LinuxTag.
--Yes. You can pretty much follow the instructions in my Linuxtips doc (see the "www" icon below).Originally Posted by Tortoise
Warning: ' make dep ' failed for me, but I just continued on and it's running now. I used the 2.4.20-xfs config file from Knoppix (it's in /boot) and changed a few things around. Included Reiserfs in the kernel so I didn't have to use mkinitrd.
--Detailed explanation follows (best as I can recollect from memory)
' cd /usr/src '
' time tar xjf /home/dave/dnld/linux-2.4.21.tar.bz2 ' == Extract the source
' cd linux-2.4.21 '
' make menuconfig '
( Load the file ' /boot/config-2.4.20-xfs ' when the menu interface comes up. Then change what you like. I saved to /usr/src/krnl2421.cfg )
" alias make='make -s -j 2 ' "
' make dep '
Errors reported:
--Not knowing what to make of this, I changed a few more things in the menuconfig and tried again. Same error. I did an ' updatedb ' and ' locate hfc_pci ' and the file is ISDN-related. The changes having no result even after taking ISDN out of the kernel build, I continued on:Code:root /usr/src/linux-2.4.21 # make dep make[1]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule. md5sum: MD5 check failed for 'hfc_pci.c' md5sum: can't open hfc_pci. md5sum: can't open hfc_pci
' time make bzImage '
System is 982 kB
warning: kernel is too big for standalone boot from floppy
--This is probably because I included Reiserfs instead of making it a module. But no big deal.
' mkdir /lib/modules/2.4.21 '
' cd /lib/modules '
' ln 2.4.21 preferred -sfn '
' cd - ' == Back to last dir
' time make modules && make modules_install '
--Again, an error came up about unresolved symbols, but I just ran ' depmod -a ' again and everything was Ok.
' cd /usr/src/linux-2.4.21 '
' cp arch/i386/boot/bzImage /boot/vmlinuz-2.4.21 '
' cp System.map /boot/System.map-2.4.21 '
' cd /boot '
' ln System.map-2.4.21 System.map -sfn '
' jstar /etc/lilo.conf ' == Just to be safe, I left the default boot image stuff alone and added a second stanza:
--Then I issued ' lilo -b /dev/fd0 ' to write the boot stuff to a floppy, and rebooted. Worked fine, so I made the new stanza the default boot in lilo.conf.Code:image=/boot/vmlinuz-2.4.21 label=newkrn2421 read-only # alias=2
--Other things I had to redo:
+ Reran vmware-config.pl == Update VMWare 3.x
+ Redid NVIDIA-Linux-x86-1.0-4363.run == Update NVidia X drivers.
--So far everything seems to be working fine. However, if you need to make an initrd, you're on your own. If you do it successfully, post to this thread and let us know how you did it.
Western Digital 1TB WD Blue PC Desktop 3.5'' Internal CMR Hard Drive - WD10EARZ
$44.99
Western Digital 1TB WD Gold Enterprise Class SATA Internal HDD - WD1005FBYZ
$84.99
Western Digital 1TB WD Blue SA510 SATA SSD Internal 2.5”/7mm Cased - WDS100T3B0A
$79.99
Dell PowerEdge R640 Server | 2x Gold 6132 28 Cores | H730p | Choose RAM / DRIVES
$2710.00
Samsung - 980 PRO 1TB Internal Gaming SSD PCIe Gen 4 x4 NVMe
$109.99
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$19.99
Samsung - Geek Squad Certified Refurbished 870 EVO 1TB SATA Solid State Drive
$67.99
2 PACK Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive
$26.89
1TB/2TB USB 3.0 Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage lot
$580.99
Apple 1TB Solid State Drive for Apple MacBook Pro
$80.00