Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Save Settings

  1. #1
    Senior Member
    Join Date
    Jul 2011
    Posts
    110

    Save Settings

    Using Knoppix 6.4 I installed to hd from the Knoppix HD Install link under Preferences. All is working fine other than I cant get it to save changes. During setup there was no option for configuring save changes. Can someone give me directions. Thanks greatly!

  2. #2
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631

  3. #3
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    installed to hd from the Knoppix HD Install link under Preferences
    ... you did "HD Installation", did you? Then you have a Debian like installation. It isn't an installation of Knoppix with compressed filesystem image and additional persistent memory.

    Your Debian like Knoppix installation works as any other distribution - Debian, Ubuntu, openSUSE, Mandriva and so on.

  4. #4
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    @ itman007

    Please excuse my error; my comments apply only to the LiveUSB situation.

  5. #5
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Yes I did use the Install to hd link thats within the prefrences menu of the live dvd. I assumed the install of this manor would keep changes. To my suprise after installing and configuring a reboot wiped out all my changes.

  6. #6
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    ... please start your "Install to hd", type in a terminal
    Code:
    df -h
    and post the output and also the output from
    Code:
    blkid
    Greetings Werner * http://www.wp-schulz.de/knoppix/summary.html
    Own Rescue-CD with Knoppix (Knoppix V6.4.4 remaster)
    Last edited by Werner P. Schulz; 07-11-2011 at 04:06 PM.

  7. #7
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Sorry fo rthe delay!
    knoppix@Microknoppix:~$ su
    root@Microknoppix:/home/knoppix# df -h
    Filesystem Size Used Avail Use% Mounted on
    rootfs 19G 8.6G 11G 45% /
    /dev/root 19G 8.6G 11G 45% /
    tmpfs 2.0G 8.0K 2.0G 1% /tmp
    udev 20M 364K 20M 2% /dev
    tmpfs 2.0G 0 2.0G 0% /dev/shm
    root@Microknoppix:/home/knoppix# blkid
    /dev/sda1: UUID="30c9b7ea-45d2-42d5-b27b-cb4b4e25d251" TYPE="swap"
    /dev/sda2: LABEL="XPOS" UUID="25CA52804E148827" TYPE="ntfs"
    /dev/sda3: UUID="7559c1a2-cc62-415c-8687-71b08891c43c" TYPE="reiserfs"
    /dev/sdb: LABEL="XP_Freeze" UUID="25CA52804E148827" TYPE="ntfs"
    /dev/sdc1: LABEL="KINGSTON" UUID="F4A4-243D" TYPE="vfat"
    root@Microknoppix:/home/knoppix#

  8. #8
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    ... ok, you have real a HD Installation of Knoppix on /dev/sda3. Therefore I cannot understand, what you mean with
    To my suprise after installing and configuring a reboot wiped out all my changes.
    What had been "wiped out"?

    But what's about /dev/sdc1? Is there also a Knoppix installation? Perhaps flash disk installation?

    Greetings Werner * http://www.wp-schulz.de/knoppix/summary.html
    Own Rescue-CD with Knoppix (Knoppix V6.4.4 remaster)

  9. #9
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Once booted to Knoppix I install webmin and nic drivers. But these are to reinstall every time the pc is rebooted. I again have to reinstall webmin and nic drivers. Knoppix doesnt save my changes. Does this help understand? Knoppix is only installed on sda3. Windows on sda2 which works and another version of windows on the second hard drive sdb, which will not boot. I select it at the grub menu but no luck.

  10. #10
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    ... how did you install "webmin and nic drivers"? I cannot found those with aptitude.

    And please read Warning.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


IBM x3250 M4 1U Server With Four 2.5

IBM x3250 M4 1U Server With Four 2.5" Drive Bays

$299.99



IBM System X3250 M3 Server 8GB RAM Intel Xeon x3440 2.53ghz (NO HDD) picture

IBM System X3250 M3 Server 8GB RAM Intel Xeon x3440 2.53ghz (NO HDD)

$41.99



IBM x3650 M4 2x Xeon E5-2670 2.6ghz 16-Core / 64GB / M5110e / 2x PSU picture

IBM x3650 M4 2x Xeon E5-2670 2.6ghz 16-Core / 64GB / M5110e / 2x PSU

$229.99



IBM System X 3250 M5 Single Xeon Quad Core E3-1220 v3 @3.1GHz,8GB RAM,Linux SUSE picture

IBM System X 3250 M5 Single Xeon Quad Core E3-1220 v3 @3.1GHz,8GB RAM,Linux SUSE

$159.00



IBM System x3550 M3 Dual Intel Xeon X5650 @2.67GHz 32GB RAM No HDD picture

IBM System x3550 M3 Dual Intel Xeon X5650 @2.67GHz 32GB RAM No HDD

$74.50



IBM System x3250 M1 1U Server Intel Pentium D @3.4 2GB RAM x2 250GB DRIVES NO OS picture

IBM System x3250 M1 1U Server Intel Pentium D @3.4 2GB RAM x2 250GB DRIVES NO OS

$50.00



IBM System x3650 M4 Dual Intel Xeon E5-2670 @2.60GHz 128GB RAM No HDD picture

IBM System x3650 M4 Dual Intel Xeon E5-2670 @2.60GHz 128GB RAM No HDD

$114.50



1U IBM x3550 M5 4 Bay SFF SAS3 Server 2x E5-2683 V3 28 Core 128GB DDR4 2x Tray picture

1U IBM x3550 M5 4 Bay SFF SAS3 Server 2x E5-2683 V3 28 Core 128GB DDR4 2x Tray

$318.00



IBM X3850 M2 4U Rack Server BOOTS 4x Xeon MP 2.93Ghz Hot Swap 32GB RAM NO HDDs picture

IBM X3850 M2 4U Rack Server BOOTS 4x Xeon MP 2.93Ghz Hot Swap 32GB RAM NO HDDs

$279.99



IBM QRadar XX28-C 2U Server BOOTS 2x Xeon E5-2650 v3 2.3GHz 128GB RAM NO HDDs picture

IBM QRadar XX28-C 2U Server BOOTS 2x Xeon E5-2650 v3 2.3GHz 128GB RAM NO HDDs

$249.99