Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Save Settings

  1. #1
    Senior Member
    Join Date
    Jul 2011
    Posts
    110

    Save Settings

    Using Knoppix 6.4 I installed to hd from the Knoppix HD Install link under Preferences. All is working fine other than I cant get it to save changes. During setup there was no option for configuring save changes. Can someone give me directions. Thanks greatly!

  2. #2
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631

  3. #3
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    installed to hd from the Knoppix HD Install link under Preferences
    ... you did "HD Installation", did you? Then you have a Debian like installation. It isn't an installation of Knoppix with compressed filesystem image and additional persistent memory.

    Your Debian like Knoppix installation works as any other distribution - Debian, Ubuntu, openSUSE, Mandriva and so on.

  4. #4
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    @ itman007

    Please excuse my error; my comments apply only to the LiveUSB situation.

  5. #5
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Yes I did use the Install to hd link thats within the prefrences menu of the live dvd. I assumed the install of this manor would keep changes. To my suprise after installing and configuring a reboot wiped out all my changes.

  6. #6
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    ... please start your "Install to hd", type in a terminal
    Code:
    df -h
    and post the output and also the output from
    Code:
    blkid
    Greetings Werner * http://www.wp-schulz.de/knoppix/summary.html
    Own Rescue-CD with Knoppix (Knoppix V6.4.4 remaster)
    Last edited by Werner P. Schulz; 07-11-2011 at 04:06 PM.

  7. #7
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Sorry fo rthe delay!
    knoppix@Microknoppix:~$ su
    root@Microknoppix:/home/knoppix# df -h
    Filesystem Size Used Avail Use% Mounted on
    rootfs 19G 8.6G 11G 45% /
    /dev/root 19G 8.6G 11G 45% /
    tmpfs 2.0G 8.0K 2.0G 1% /tmp
    udev 20M 364K 20M 2% /dev
    tmpfs 2.0G 0 2.0G 0% /dev/shm
    root@Microknoppix:/home/knoppix# blkid
    /dev/sda1: UUID="30c9b7ea-45d2-42d5-b27b-cb4b4e25d251" TYPE="swap"
    /dev/sda2: LABEL="XPOS" UUID="25CA52804E148827" TYPE="ntfs"
    /dev/sda3: UUID="7559c1a2-cc62-415c-8687-71b08891c43c" TYPE="reiserfs"
    /dev/sdb: LABEL="XP_Freeze" UUID="25CA52804E148827" TYPE="ntfs"
    /dev/sdc1: LABEL="KINGSTON" UUID="F4A4-243D" TYPE="vfat"
    root@Microknoppix:/home/knoppix#

  8. #8
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    ... ok, you have real a HD Installation of Knoppix on /dev/sda3. Therefore I cannot understand, what you mean with
    To my suprise after installing and configuring a reboot wiped out all my changes.
    What had been "wiped out"?

    But what's about /dev/sdc1? Is there also a Knoppix installation? Perhaps flash disk installation?

    Greetings Werner * http://www.wp-schulz.de/knoppix/summary.html
    Own Rescue-CD with Knoppix (Knoppix V6.4.4 remaster)

  9. #9
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Once booted to Knoppix I install webmin and nic drivers. But these are to reinstall every time the pc is rebooted. I again have to reinstall webmin and nic drivers. Knoppix doesnt save my changes. Does this help understand? Knoppix is only installed on sda3. Windows on sda2 which works and another version of windows on the second hard drive sdb, which will not boot. I select it at the grub menu but no luck.

  10. #10
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    ... how did you install "webmin and nic drivers"? I cannot found those with aptitude.

    And please read Warning.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01 picture

SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01

$109.99



Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB picture

Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB

$2699.99



Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS picture

Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS

$103.99



HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives picture

HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives

$59.98



DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC picture

DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC

$50.00



HP ProLiant BL460c Server Blade (2 x  CPU) 24GB RAM/No Drives  picture

HP ProLiant BL460c Server Blade (2 x CPU) 24GB RAM/No Drives

$45.60



Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG picture

Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG

$69.99



Dell PowerEdge C6400 Blade Server Chassis w/ 2x 2400W PSUs - Preproduction Model picture

Dell PowerEdge C6400 Blade Server Chassis w/ 2x 2400W PSUs - Preproduction Model

$349.00



Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W picture

Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W

$399.00



Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric picture

Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric

$139.99