-
Senior Member
registered user
Kind of minirt init changelog...
Here's the init changes (ADRIANE 6.7). Among other things, ext4 mounting is now in place.
Also, the kernels, both 32 and 64 bits, have grown a lot - probably heaps of extra modules included as deemed necessary.
Code:
";;
4c4
< # (C) 2011 by Klaus Knopper <knoppix@knopper.net>
---
> # (C) 2010 by Klaus Knopper <knoppix@knopper.net>
140,141d139
< local rc="1"
< # Try to be quick, and probe the "most likely" file systems first
146,161c144,146
< mount -t ext4 -o "$RW" "$1" "$2" || \
< mount -t ext3 -o "$RW" "$1" "$2" || \
< mount -t ext2 -o "$RW" "$1" "$2"
< rc="$?"
< # Still no luck? Try everything else that the (static) kernel supports
< if [ "$rc" != 0 ]; then
< local fs
< for fs in `awk '!/^nodev/{print $1}' /proc/filesystems 2>&1`; do
< case "$fs" in
< ext[234]|reiserfs|ntfs|fuse*|*fat|iso9660) ;; # Already did that
< *) mount -t "$fs" -o "$RW" "$1" "$2"; rc="$?";;
< esac
< [ "$rc" = "0" ] && break
< done
< fi
< return "$rc"
---
> mount -t ext3 -o "$RW" "$1" "$2" || \
> mount -t ext2 -o "$RW" "$1" "$2"
> return "$?"
303c288
< [ -r "$mod" -a ! -d /sys/module/"${mod%.ko}" ] && insmod "$mod" >/dev/null 2>&1
---
> [ -r "$mod" -a ! -d /sys/module/"${mod%.ko}" ] && insmod "$mod"
338c323
< *\ vga=[0-9]*|*debug*|*\ splash*) true;; *) echo -n "[0;0H[J";;
---
> *\ vga=[0-9]*|*debug*|*\ splash*) true;; *) echo -n "[6;0H[J";;
341,347d325
< message \
< ' _ __ __ __ _____ _____ _____ __ _ __ ___ _______
< / / / / / | / / / ___ \ / __ \ / __ \ / / | |/ / / ___/ \___ /
< / /__/ / / | / / / / / / / /__/ / / /__/ / / / \ / / /_ __/ /
< / / _ - / /| |/ / / / / / / _____/ / _____/ / / / | / __ \ /_ _\
< / / \ \ / / | / / /__/ / / / / / / / / /\ \ / /_/ / _ / /
< /_/ |_|/_/ |__/ \_____/ /_/ /_/ /_/ /_/ |_| \____/ /_/ /_/'
447,455c425
< #@@@GvR
< # Try using other (SMB) mounts
< [ -z "$MOUNTED" ] && [ -x /static/mount.cifs ] && { if [ -n "$NFSDIR" ]; then
< message -n "${CRE}${BLUE}Trying to SMB mount CD on ${MAGENTA}$NFSDIR${BLUE}...${NORMAL}"
< message /static/mount.cifs "${NFSDIR}" /mnt-system -r -o guest,noserverino,nounix
< /static/mount.cifs "${NFSDIR}" /mnt-system -r -o guest,noserverino,nounix > /dev/null 2>&1 && MOUNTED="yes"
< [ -z "$MOUNTED" ] && umount /mnt-system > /dev/null 2>&1
< fi; }
< #@@GvR
---
>
482c452
< checkbootparam "bootfrom" || debugshell
---
> debugshell
488,580d457
< # Return existing device names listed as regular expressions
< listpartitions(){
< local pattern file
< for pattern in "$@"; do
< for file in $(find /sys/class/block -maxdepth 2 -name "$pattern"); do
< file="${file##*/}"
< [ -b "/dev/$file" ] && echo "/dev/$file"
< done
< done
< # awk 'BEGIN{old="__start"}/'"$1"'/{if($0==old){exit}else{old=$0;if($4&&$4!="name"){print "/dev/"$4}}}' /proc/partitions # Insufficient, does not find CD-Roms
< }
<
< #@@@GvR Bootfrom Section start
< BOOTSYS="/mnt-system"
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< # find BOOTFROM variable (/dev/sda1/boot/k620/*.iso)
< BOOTFROM=""; bootfrom="";
< for i in $CMDLINE; do case "$i" in [Bb][Oo][Oo][Tt][Ff][Rr][Oo][Mm]=*) eval $i;; esac; done
< [ -n "$bootfrom" ] && BOOTFROM="$bootfrom"
< if [ -n "$BOOTFROM" ]; then
< # we may have an ISO file, try mounting it
< BOOTISO="/mnt-iso"; BOOTDEV=""; BOOTFILE=""
< mkdir -p $BOOTISO $BOOTSYS
< [ -b /dev/loop1 ] || mknod -m 755 /dev/loop1 b 7 1
< if [ -n "$NFSDIR" ]; then
< umount $BOOTSYS; MOUNTED=""
< message nfs remount "${NFSDIR}" "${BOOTISO}" -o ro,rsize=8192,wsize=8192,hard,nolock,intr$SECUREOPTIONS
< mount "${NFSDIR}" "${BOOTISO}" -o ro,rsize=8192,wsize=8192,hard,nolock,intr$SECUREOPTIONS > /dev/null 2>&1 && MOUNTED="yes"
< if [ -z "$MOUNTED" ]; then
< umount $BOOTISO >/dev/null 2>&1
< if [ -x /static/mount.cifs ]; then
< message cifs remount "${NFSDIR}" "${BOOTISO}" -r -o guest,noserverino,nounix
< /static/mount.cifs "${NFSDIR}" "${BOOTISO}" -r -o guest,noserverino,nounix > /dev/null 2>&1 && MOUNTED="yes"
< [ -z "$MOUNTED" ] && umount $BOOTISO > /dev/null 2>&1
< fi
< fi
< BOOTFILE=$BOOTFROM
< else
< BOOTDEV=$(echo "$BOOTFROM" | awk -F/ '{print $1"/"$2"/"$3}')
< BOOTFILE="${BOOTFROM#*/}"; BOOTFILE="${BOOTFILE#*/}"; BOOTFILE="${BOOTFILE#*/}"
< message -n "${CRE}${BLUE}Trying to mount the ISO partition ${MAGENTA}$BOOTDEV${BLUE}...${NORMAL}"
< trymount "$BOOTDEV" "$BOOTISO" >/dev/null 2>&1
< fi
< if [ ! -r "$BOOTISO/$BOOTFILE" ]; then umount $BOOTISO >/dev/null 2>&1
< message "${CRE}${RED}Cannot mount the partition ${MAGENTA}$BOOTDEV${NORMAL} (cannot find: ${RED}${BOOTISO}/${BOOTFILE}${NORMAL})"
< ls -al "$BOOTISO"
< else
< message -n "${CRE}${BLUE}Trying to mount CD image on ${MAGENTA}${BOOTFILE}${BLUE}...${NORMAL}"
< losetup /dev/loop1 "$BOOTISO/$BOOTFILE" && mount -r /dev/loop1 $BOOTSYS >/dev/null 2>&1
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then umount $BOOTSYS >/dev/null 2>&1
< message -n "${CRE}${RED}Cannot mount CD image on ${MAGENTA}${BOOTFILE}${NORMAL}"
< umount "$BOOTSYS" >/dev/null 2>&1
< losetup -d /dev/loop1 >/dev/null 2>&1
< else
< message -e "\r${CRE}${GREEN}$DISTRO ${FOUNDAT}: ${MAGENTA}${BOOTDEV}/$(cd $BOOTISO; ls -a $BOOTFILE)${NORMAL} "
< fi
< fi
< # try to find ISO in an alternate locations using the same path
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< message -n "${CRE}${MAGENTA}Trying to find the ISO image in an other partition...${NORMAL}"
< # If USB storage device, wait for USB...
< if [ -d /sys/bus/usb/drivers/usb-storage ]; then WUSB="1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20"; else WUSB="1"; fi
< for i in $WUSB ; do
< for BOOTDEV in $(listpartitions 'hd[a-z]' 'hd[a-z][0-9]*' 'scd[0-9]*' 'sr[0-9]*' 'sd[a-z]' 'sd[a-z][0-9]*'); do
< if [ -b "$BOOTDEV" ]; then
< message -n -e "\r${CRE}${BLUE}Searching for ISO in: ${MAGENTA}${BOOTDEV}${NORMAL} "
< trymount "$BOOTDEV" "$BOOTISO" > /dev/null 2>&1
< if [ ! -r "$BOOTISO/$BOOTFILE" ]; then umount $BOOTISO >/dev/null 2>&1; else
< message -n "${CRE}${BLUE}Trying to mount CD image on ${MAGENTA}${BOOTFILE}${BLUE}...${NORMAL}"
< losetup /dev/loop1 "$BOOTISO/$BOOTFILE" && mount -r /dev/loop1 $BOOTSYS >/dev/null 2>&1
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< umount $BOOTSYS >/dev/null 2>&1
< losetup -d /dev/loop1 >/dev/null 2>&1
< else
< message -e "\r${CRE}${GREEN}$DISTRO ${FOUNDAT}: ${MAGENTA}${BOOTDEV}/$(cd $BOOTISO; ls -a $BOOTFILE)${NORMAL} "
< fi
< fi
< fi
< done
< if [ -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< break
< else
< message -n -e "\r${CRE}${BLUE}${WAITFORUSB}${NORMAL} $i ";
< sleep 1
< fi
< done
< fi
< fi
< fi
< if [ -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then MOUNTED="yes"; FOUND_KNOPPIX="true"; fi
< #@@@GvR Bootfrom Section end
<
<
582c459
< amount=$(awk -F: '/^MemTotal/{printf "%d",int($2); exit 0}' /proc/meminfo 2>/dev/null); #'
---
> amount=$(awk -F: '/^MemTotal/{printf "%d",int($2); exit 0}' /proc/meminfo 2>/dev/null)
594,607c471,481
< #@@@GvR add "ramdisk" parameter to allow specifying ramdisk size, otherwise just use max(ram*4/5,2000)M
< for i in $CMDLINE; do case "$i" in [Rr][Aa][Mm][Dd][Ii][Ss][Kk]=*) eval $i;; esac; done
< case "$ramdisk" in
< [0-9]*[KMG]) RAMDISK="$ramdisk" ;;
< esac
< if [ -z "$RAMDISK" ]; then
< if [ "$TOTALMEM" -ge 2000 ] >/dev/null 2>&1; then
< RAMDISK="$(expr $TOTALMEM / 5)"; RAMDISK="$(expr $RAMDISK \* 4)M"
< else
< # Too large, but we can still use swapspace
< RAMDISK="2G"
< fi
< fi
< #@@@GvR
---
> # Return existing device names listed as regular expressions
> listpartitions(){
> local pattern file
> for pattern in "$@"; do
> for file in $(find /sys/class/block -maxdepth 2 -name "$pattern"); do
> file="${file##*/}"
> [ -b "/dev/$file" ] && echo "/dev/$file"
> done
> done
> # awk 'BEGIN{old="__start"}/'"$1"'/{if($0==old){exit}else{old=$0;if($4&&$4!="name"){print "/dev/"$4}}}' /proc/partitions # Insufficient, does not find CD-Roms
> }
609c483
< if [ -z "$FOUND_KNOPPIX" -a -z "$TSCLIENT" ]; then
---
> if [ -z "$TSCLIENT" ]; then
650c524
< mount -t tmpfs -o size="$RAMDISK",dev,suid,exec tmpfs /ramdisk
---
> mount -t tmpfs -o size=2G,dev,suid,exec tmpfs /ramdisk
671c545
< [ -r /KNOPPIX/lib/ld-linux.so.2 -a -x /KNOPPIX/"$cmd" ] && /KNOPPIX/lib/ld-linux.so.2 --library-path "/KNOPPIX/lib:/KNOPPPIX/usr/lib:/KNOPPIX/lib/i386-linux-gnu" /KNOPPIX/"$cmd" "$@"
---
> [ -r /KNOPPIX/lib/ld-linux.so.2 -a -x /KNOPPIX/"$cmd" ] && /KNOPPIX/lib/ld-linux.so.2 --library-path "/KNOPPIX/lib:/KNOPPPIX/usr/lib" /KNOPPIX/"$cmd" "$@"
739c613
< for base in $home /mnt-system/"$knoppix_dir"/knoppix-data /mnt-system/knoppix; do
---
> for base in /mnt-system/"$knoppix_dir"/knoppix-data /mnt-system/knoppix; do
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
AMD EPYC 7282 CPU Processor 16 Cores 32 Threads 2.8GHZ up to 3.2GHZ 120W no lock
$75.00
Intel - Core i7-12700K Desktop Processor 12 (8P+4E) Cores up to 5.0 GHz Unloc...
$419.99
Intel Xeon E5-2697A V4 2.6GHz CPU Processor 16-Core Socket LGA2011 SR2K1
$39.99
Intel - Core i9-12900K Desktop Processor 16 (8P+8E) Cores up to 5.2 GHz Unloc...
$619.99
Intel Quad Core i3-12100 3.3GHz 12MB LGA1700 12th Gen. CPU Processor SRL62
$45.96
AMD Ryzen 5 4500 6-Core 3.6GHz Socket AM4 65W CPU Desktop Processor
$79.00
Intel Core i9-13900KF Unlocked Desktop Processor - 24 Cores (8P+16E) & 32 Thread
$539.99
Intel Core i7-3770 3.40GHz Quad-Core CPU Processor QC1W LGA1155 Socket
$33.49
AMD Ryzen 7 7700 Processor (5.3 GHz, 8 Cores, Socket AM5) Boxed -...
$259.99
Intel Core i7-3770 3.40GHz 8MB Quad Core Socket LGA1155 CPU Processor SR0PK
$35.00