-
Senior Member
registered user
Kind of minirt init changelog...
Here's the init changes (ADRIANE 6.7). Among other things, ext4 mounting is now in place.
Also, the kernels, both 32 and 64 bits, have grown a lot - probably heaps of extra modules included as deemed necessary.
Code:
";;
4c4
< # (C) 2011 by Klaus Knopper <knoppix@knopper.net>
---
> # (C) 2010 by Klaus Knopper <knoppix@knopper.net>
140,141d139
< local rc="1"
< # Try to be quick, and probe the "most likely" file systems first
146,161c144,146
< mount -t ext4 -o "$RW" "$1" "$2" || \
< mount -t ext3 -o "$RW" "$1" "$2" || \
< mount -t ext2 -o "$RW" "$1" "$2"
< rc="$?"
< # Still no luck? Try everything else that the (static) kernel supports
< if [ "$rc" != 0 ]; then
< local fs
< for fs in `awk '!/^nodev/{print $1}' /proc/filesystems 2>&1`; do
< case "$fs" in
< ext[234]|reiserfs|ntfs|fuse*|*fat|iso9660) ;; # Already did that
< *) mount -t "$fs" -o "$RW" "$1" "$2"; rc="$?";;
< esac
< [ "$rc" = "0" ] && break
< done
< fi
< return "$rc"
---
> mount -t ext3 -o "$RW" "$1" "$2" || \
> mount -t ext2 -o "$RW" "$1" "$2"
> return "$?"
303c288
< [ -r "$mod" -a ! -d /sys/module/"${mod%.ko}" ] && insmod "$mod" >/dev/null 2>&1
---
> [ -r "$mod" -a ! -d /sys/module/"${mod%.ko}" ] && insmod "$mod"
338c323
< *\ vga=[0-9]*|*debug*|*\ splash*) true;; *) echo -n "[0;0H[J";;
---
> *\ vga=[0-9]*|*debug*|*\ splash*) true;; *) echo -n "[6;0H[J";;
341,347d325
< message \
< ' _ __ __ __ _____ _____ _____ __ _ __ ___ _______
< / / / / / | / / / ___ \ / __ \ / __ \ / / | |/ / / ___/ \___ /
< / /__/ / / | / / / / / / / /__/ / / /__/ / / / \ / / /_ __/ /
< / / _ - / /| |/ / / / / / / _____/ / _____/ / / / | / __ \ /_ _\
< / / \ \ / / | / / /__/ / / / / / / / / /\ \ / /_/ / _ / /
< /_/ |_|/_/ |__/ \_____/ /_/ /_/ /_/ /_/ |_| \____/ /_/ /_/'
447,455c425
< #@@@GvR
< # Try using other (SMB) mounts
< [ -z "$MOUNTED" ] && [ -x /static/mount.cifs ] && { if [ -n "$NFSDIR" ]; then
< message -n "${CRE}${BLUE}Trying to SMB mount CD on ${MAGENTA}$NFSDIR${BLUE}...${NORMAL}"
< message /static/mount.cifs "${NFSDIR}" /mnt-system -r -o guest,noserverino,nounix
< /static/mount.cifs "${NFSDIR}" /mnt-system -r -o guest,noserverino,nounix > /dev/null 2>&1 && MOUNTED="yes"
< [ -z "$MOUNTED" ] && umount /mnt-system > /dev/null 2>&1
< fi; }
< #@@GvR
---
>
482c452
< checkbootparam "bootfrom" || debugshell
---
> debugshell
488,580d457
< # Return existing device names listed as regular expressions
< listpartitions(){
< local pattern file
< for pattern in "$@"; do
< for file in $(find /sys/class/block -maxdepth 2 -name "$pattern"); do
< file="${file##*/}"
< [ -b "/dev/$file" ] && echo "/dev/$file"
< done
< done
< # awk 'BEGIN{old="__start"}/'"$1"'/{if($0==old){exit}else{old=$0;if($4&&$4!="name"){print "/dev/"$4}}}' /proc/partitions # Insufficient, does not find CD-Roms
< }
<
< #@@@GvR Bootfrom Section start
< BOOTSYS="/mnt-system"
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< # find BOOTFROM variable (/dev/sda1/boot/k620/*.iso)
< BOOTFROM=""; bootfrom="";
< for i in $CMDLINE; do case "$i" in [Bb][Oo][Oo][Tt][Ff][Rr][Oo][Mm]=*) eval $i;; esac; done
< [ -n "$bootfrom" ] && BOOTFROM="$bootfrom"
< if [ -n "$BOOTFROM" ]; then
< # we may have an ISO file, try mounting it
< BOOTISO="/mnt-iso"; BOOTDEV=""; BOOTFILE=""
< mkdir -p $BOOTISO $BOOTSYS
< [ -b /dev/loop1 ] || mknod -m 755 /dev/loop1 b 7 1
< if [ -n "$NFSDIR" ]; then
< umount $BOOTSYS; MOUNTED=""
< message nfs remount "${NFSDIR}" "${BOOTISO}" -o ro,rsize=8192,wsize=8192,hard,nolock,intr$SECUREOPTIONS
< mount "${NFSDIR}" "${BOOTISO}" -o ro,rsize=8192,wsize=8192,hard,nolock,intr$SECUREOPTIONS > /dev/null 2>&1 && MOUNTED="yes"
< if [ -z "$MOUNTED" ]; then
< umount $BOOTISO >/dev/null 2>&1
< if [ -x /static/mount.cifs ]; then
< message cifs remount "${NFSDIR}" "${BOOTISO}" -r -o guest,noserverino,nounix
< /static/mount.cifs "${NFSDIR}" "${BOOTISO}" -r -o guest,noserverino,nounix > /dev/null 2>&1 && MOUNTED="yes"
< [ -z "$MOUNTED" ] && umount $BOOTISO > /dev/null 2>&1
< fi
< fi
< BOOTFILE=$BOOTFROM
< else
< BOOTDEV=$(echo "$BOOTFROM" | awk -F/ '{print $1"/"$2"/"$3}')
< BOOTFILE="${BOOTFROM#*/}"; BOOTFILE="${BOOTFILE#*/}"; BOOTFILE="${BOOTFILE#*/}"
< message -n "${CRE}${BLUE}Trying to mount the ISO partition ${MAGENTA}$BOOTDEV${BLUE}...${NORMAL}"
< trymount "$BOOTDEV" "$BOOTISO" >/dev/null 2>&1
< fi
< if [ ! -r "$BOOTISO/$BOOTFILE" ]; then umount $BOOTISO >/dev/null 2>&1
< message "${CRE}${RED}Cannot mount the partition ${MAGENTA}$BOOTDEV${NORMAL} (cannot find: ${RED}${BOOTISO}/${BOOTFILE}${NORMAL})"
< ls -al "$BOOTISO"
< else
< message -n "${CRE}${BLUE}Trying to mount CD image on ${MAGENTA}${BOOTFILE}${BLUE}...${NORMAL}"
< losetup /dev/loop1 "$BOOTISO/$BOOTFILE" && mount -r /dev/loop1 $BOOTSYS >/dev/null 2>&1
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then umount $BOOTSYS >/dev/null 2>&1
< message -n "${CRE}${RED}Cannot mount CD image on ${MAGENTA}${BOOTFILE}${NORMAL}"
< umount "$BOOTSYS" >/dev/null 2>&1
< losetup -d /dev/loop1 >/dev/null 2>&1
< else
< message -e "\r${CRE}${GREEN}$DISTRO ${FOUNDAT}: ${MAGENTA}${BOOTDEV}/$(cd $BOOTISO; ls -a $BOOTFILE)${NORMAL} "
< fi
< fi
< # try to find ISO in an alternate locations using the same path
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< message -n "${CRE}${MAGENTA}Trying to find the ISO image in an other partition...${NORMAL}"
< # If USB storage device, wait for USB...
< if [ -d /sys/bus/usb/drivers/usb-storage ]; then WUSB="1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20"; else WUSB="1"; fi
< for i in $WUSB ; do
< for BOOTDEV in $(listpartitions 'hd[a-z]' 'hd[a-z][0-9]*' 'scd[0-9]*' 'sr[0-9]*' 'sd[a-z]' 'sd[a-z][0-9]*'); do
< if [ -b "$BOOTDEV" ]; then
< message -n -e "\r${CRE}${BLUE}Searching for ISO in: ${MAGENTA}${BOOTDEV}${NORMAL} "
< trymount "$BOOTDEV" "$BOOTISO" > /dev/null 2>&1
< if [ ! -r "$BOOTISO/$BOOTFILE" ]; then umount $BOOTISO >/dev/null 2>&1; else
< message -n "${CRE}${BLUE}Trying to mount CD image on ${MAGENTA}${BOOTFILE}${BLUE}...${NORMAL}"
< losetup /dev/loop1 "$BOOTISO/$BOOTFILE" && mount -r /dev/loop1 $BOOTSYS >/dev/null 2>&1
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< umount $BOOTSYS >/dev/null 2>&1
< losetup -d /dev/loop1 >/dev/null 2>&1
< else
< message -e "\r${CRE}${GREEN}$DISTRO ${FOUNDAT}: ${MAGENTA}${BOOTDEV}/$(cd $BOOTISO; ls -a $BOOTFILE)${NORMAL} "
< fi
< fi
< fi
< done
< if [ -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< break
< else
< message -n -e "\r${CRE}${BLUE}${WAITFORUSB}${NORMAL} $i ";
< sleep 1
< fi
< done
< fi
< fi
< fi
< if [ -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then MOUNTED="yes"; FOUND_KNOPPIX="true"; fi
< #@@@GvR Bootfrom Section end
<
<
582c459
< amount=$(awk -F: '/^MemTotal/{printf "%d",int($2); exit 0}' /proc/meminfo 2>/dev/null); #'
---
> amount=$(awk -F: '/^MemTotal/{printf "%d",int($2); exit 0}' /proc/meminfo 2>/dev/null)
594,607c471,481
< #@@@GvR add "ramdisk" parameter to allow specifying ramdisk size, otherwise just use max(ram*4/5,2000)M
< for i in $CMDLINE; do case "$i" in [Rr][Aa][Mm][Dd][Ii][Ss][Kk]=*) eval $i;; esac; done
< case "$ramdisk" in
< [0-9]*[KMG]) RAMDISK="$ramdisk" ;;
< esac
< if [ -z "$RAMDISK" ]; then
< if [ "$TOTALMEM" -ge 2000 ] >/dev/null 2>&1; then
< RAMDISK="$(expr $TOTALMEM / 5)"; RAMDISK="$(expr $RAMDISK \* 4)M"
< else
< # Too large, but we can still use swapspace
< RAMDISK="2G"
< fi
< fi
< #@@@GvR
---
> # Return existing device names listed as regular expressions
> listpartitions(){
> local pattern file
> for pattern in "$@"; do
> for file in $(find /sys/class/block -maxdepth 2 -name "$pattern"); do
> file="${file##*/}"
> [ -b "/dev/$file" ] && echo "/dev/$file"
> done
> done
> # awk 'BEGIN{old="__start"}/'"$1"'/{if($0==old){exit}else{old=$0;if($4&&$4!="name"){print "/dev/"$4}}}' /proc/partitions # Insufficient, does not find CD-Roms
> }
609c483
< if [ -z "$FOUND_KNOPPIX" -a -z "$TSCLIENT" ]; then
---
> if [ -z "$TSCLIENT" ]; then
650c524
< mount -t tmpfs -o size="$RAMDISK",dev,suid,exec tmpfs /ramdisk
---
> mount -t tmpfs -o size=2G,dev,suid,exec tmpfs /ramdisk
671c545
< [ -r /KNOPPIX/lib/ld-linux.so.2 -a -x /KNOPPIX/"$cmd" ] && /KNOPPIX/lib/ld-linux.so.2 --library-path "/KNOPPIX/lib:/KNOPPPIX/usr/lib:/KNOPPIX/lib/i386-linux-gnu" /KNOPPIX/"$cmd" "$@"
---
> [ -r /KNOPPIX/lib/ld-linux.so.2 -a -x /KNOPPIX/"$cmd" ] && /KNOPPIX/lib/ld-linux.so.2 --library-path "/KNOPPIX/lib:/KNOPPPIX/usr/lib" /KNOPPIX/"$cmd" "$@"
739c613
< for base in $home /mnt-system/"$knoppix_dir"/knoppix-data /mnt-system/knoppix; do
---
> for base in /mnt-system/"$knoppix_dir"/knoppix-data /mnt-system/knoppix; do
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
CORSAIR Vengeance LPX 32GB 2x16GB DDR4-2666 PC4-21300 288Pin 2666Mhz Memory Ram
$99.99
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Lot of 2 32GB DDR4 2666 PC4-21300 SODIMM RAM Modules Mixed Brand
$60.00
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$21.50
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
Crucial 16GB (2x 8GB) Kit DDR3L 1600MHz PC3-12800 UDIMM Desktop 240-Pin CL11 RAM
$23.33
8GB PC3L-12800S 1600MHz SODIMM DDR3 RAM | Grade A
$12.00
Samsung 128GB (4x 32GB) M86B4G70DM0-CMA3 PC3-14900L 4Rx4 DDR3 ECC Reg Server Mem
$39.99
Lot of 50 4GB DDR3 PC3 Sticks Desktop Ram - mixed speeds and brands
$88.00
HyperX FURY DDR4 16GB 3200 MHz PC4-25600 Desktop RAM Memory DIMM 288pin 2x 16GB
$127.20