-
Senior Member
registered user
Kind of minirt init changelog...
Here's the init changes (ADRIANE 6.7). Among other things, ext4 mounting is now in place.
Also, the kernels, both 32 and 64 bits, have grown a lot - probably heaps of extra modules included as deemed necessary.
Code:
";;
4c4
< # (C) 2011 by Klaus Knopper <knoppix@knopper.net>
---
> # (C) 2010 by Klaus Knopper <knoppix@knopper.net>
140,141d139
< local rc="1"
< # Try to be quick, and probe the "most likely" file systems first
146,161c144,146
< mount -t ext4 -o "$RW" "$1" "$2" || \
< mount -t ext3 -o "$RW" "$1" "$2" || \
< mount -t ext2 -o "$RW" "$1" "$2"
< rc="$?"
< # Still no luck? Try everything else that the (static) kernel supports
< if [ "$rc" != 0 ]; then
< local fs
< for fs in `awk '!/^nodev/{print $1}' /proc/filesystems 2>&1`; do
< case "$fs" in
< ext[234]|reiserfs|ntfs|fuse*|*fat|iso9660) ;; # Already did that
< *) mount -t "$fs" -o "$RW" "$1" "$2"; rc="$?";;
< esac
< [ "$rc" = "0" ] && break
< done
< fi
< return "$rc"
---
> mount -t ext3 -o "$RW" "$1" "$2" || \
> mount -t ext2 -o "$RW" "$1" "$2"
> return "$?"
303c288
< [ -r "$mod" -a ! -d /sys/module/"${mod%.ko}" ] && insmod "$mod" >/dev/null 2>&1
---
> [ -r "$mod" -a ! -d /sys/module/"${mod%.ko}" ] && insmod "$mod"
338c323
< *\ vga=[0-9]*|*debug*|*\ splash*) true;; *) echo -n "[0;0H[J";;
---
> *\ vga=[0-9]*|*debug*|*\ splash*) true;; *) echo -n "[6;0H[J";;
341,347d325
< message \
< ' _ __ __ __ _____ _____ _____ __ _ __ ___ _______
< / / / / / | / / / ___ \ / __ \ / __ \ / / | |/ / / ___/ \___ /
< / /__/ / / | / / / / / / / /__/ / / /__/ / / / \ / / /_ __/ /
< / / _ - / /| |/ / / / / / / _____/ / _____/ / / / | / __ \ /_ _\
< / / \ \ / / | / / /__/ / / / / / / / / /\ \ / /_/ / _ / /
< /_/ |_|/_/ |__/ \_____/ /_/ /_/ /_/ /_/ |_| \____/ /_/ /_/'
447,455c425
< #@@@GvR
< # Try using other (SMB) mounts
< [ -z "$MOUNTED" ] && [ -x /static/mount.cifs ] && { if [ -n "$NFSDIR" ]; then
< message -n "${CRE}${BLUE}Trying to SMB mount CD on ${MAGENTA}$NFSDIR${BLUE}...${NORMAL}"
< message /static/mount.cifs "${NFSDIR}" /mnt-system -r -o guest,noserverino,nounix
< /static/mount.cifs "${NFSDIR}" /mnt-system -r -o guest,noserverino,nounix > /dev/null 2>&1 && MOUNTED="yes"
< [ -z "$MOUNTED" ] && umount /mnt-system > /dev/null 2>&1
< fi; }
< #@@GvR
---
>
482c452
< checkbootparam "bootfrom" || debugshell
---
> debugshell
488,580d457
< # Return existing device names listed as regular expressions
< listpartitions(){
< local pattern file
< for pattern in "$@"; do
< for file in $(find /sys/class/block -maxdepth 2 -name "$pattern"); do
< file="${file##*/}"
< [ -b "/dev/$file" ] && echo "/dev/$file"
< done
< done
< # awk 'BEGIN{old="__start"}/'"$1"'/{if($0==old){exit}else{old=$0;if($4&&$4!="name"){print "/dev/"$4}}}' /proc/partitions # Insufficient, does not find CD-Roms
< }
<
< #@@@GvR Bootfrom Section start
< BOOTSYS="/mnt-system"
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< # find BOOTFROM variable (/dev/sda1/boot/k620/*.iso)
< BOOTFROM=""; bootfrom="";
< for i in $CMDLINE; do case "$i" in [Bb][Oo][Oo][Tt][Ff][Rr][Oo][Mm]=*) eval $i;; esac; done
< [ -n "$bootfrom" ] && BOOTFROM="$bootfrom"
< if [ -n "$BOOTFROM" ]; then
< # we may have an ISO file, try mounting it
< BOOTISO="/mnt-iso"; BOOTDEV=""; BOOTFILE=""
< mkdir -p $BOOTISO $BOOTSYS
< [ -b /dev/loop1 ] || mknod -m 755 /dev/loop1 b 7 1
< if [ -n "$NFSDIR" ]; then
< umount $BOOTSYS; MOUNTED=""
< message nfs remount "${NFSDIR}" "${BOOTISO}" -o ro,rsize=8192,wsize=8192,hard,nolock,intr$SECUREOPTIONS
< mount "${NFSDIR}" "${BOOTISO}" -o ro,rsize=8192,wsize=8192,hard,nolock,intr$SECUREOPTIONS > /dev/null 2>&1 && MOUNTED="yes"
< if [ -z "$MOUNTED" ]; then
< umount $BOOTISO >/dev/null 2>&1
< if [ -x /static/mount.cifs ]; then
< message cifs remount "${NFSDIR}" "${BOOTISO}" -r -o guest,noserverino,nounix
< /static/mount.cifs "${NFSDIR}" "${BOOTISO}" -r -o guest,noserverino,nounix > /dev/null 2>&1 && MOUNTED="yes"
< [ -z "$MOUNTED" ] && umount $BOOTISO > /dev/null 2>&1
< fi
< fi
< BOOTFILE=$BOOTFROM
< else
< BOOTDEV=$(echo "$BOOTFROM" | awk -F/ '{print $1"/"$2"/"$3}')
< BOOTFILE="${BOOTFROM#*/}"; BOOTFILE="${BOOTFILE#*/}"; BOOTFILE="${BOOTFILE#*/}"
< message -n "${CRE}${BLUE}Trying to mount the ISO partition ${MAGENTA}$BOOTDEV${BLUE}...${NORMAL}"
< trymount "$BOOTDEV" "$BOOTISO" >/dev/null 2>&1
< fi
< if [ ! -r "$BOOTISO/$BOOTFILE" ]; then umount $BOOTISO >/dev/null 2>&1
< message "${CRE}${RED}Cannot mount the partition ${MAGENTA}$BOOTDEV${NORMAL} (cannot find: ${RED}${BOOTISO}/${BOOTFILE}${NORMAL})"
< ls -al "$BOOTISO"
< else
< message -n "${CRE}${BLUE}Trying to mount CD image on ${MAGENTA}${BOOTFILE}${BLUE}...${NORMAL}"
< losetup /dev/loop1 "$BOOTISO/$BOOTFILE" && mount -r /dev/loop1 $BOOTSYS >/dev/null 2>&1
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then umount $BOOTSYS >/dev/null 2>&1
< message -n "${CRE}${RED}Cannot mount CD image on ${MAGENTA}${BOOTFILE}${NORMAL}"
< umount "$BOOTSYS" >/dev/null 2>&1
< losetup -d /dev/loop1 >/dev/null 2>&1
< else
< message -e "\r${CRE}${GREEN}$DISTRO ${FOUNDAT}: ${MAGENTA}${BOOTDEV}/$(cd $BOOTISO; ls -a $BOOTFILE)${NORMAL} "
< fi
< fi
< # try to find ISO in an alternate locations using the same path
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< message -n "${CRE}${MAGENTA}Trying to find the ISO image in an other partition...${NORMAL}"
< # If USB storage device, wait for USB...
< if [ -d /sys/bus/usb/drivers/usb-storage ]; then WUSB="1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20"; else WUSB="1"; fi
< for i in $WUSB ; do
< for BOOTDEV in $(listpartitions 'hd[a-z]' 'hd[a-z][0-9]*' 'scd[0-9]*' 'sr[0-9]*' 'sd[a-z]' 'sd[a-z][0-9]*'); do
< if [ -b "$BOOTDEV" ]; then
< message -n -e "\r${CRE}${BLUE}Searching for ISO in: ${MAGENTA}${BOOTDEV}${NORMAL} "
< trymount "$BOOTDEV" "$BOOTISO" > /dev/null 2>&1
< if [ ! -r "$BOOTISO/$BOOTFILE" ]; then umount $BOOTISO >/dev/null 2>&1; else
< message -n "${CRE}${BLUE}Trying to mount CD image on ${MAGENTA}${BOOTFILE}${BLUE}...${NORMAL}"
< losetup /dev/loop1 "$BOOTISO/$BOOTFILE" && mount -r /dev/loop1 $BOOTSYS >/dev/null 2>&1
< if [ ! -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< umount $BOOTSYS >/dev/null 2>&1
< losetup -d /dev/loop1 >/dev/null 2>&1
< else
< message -e "\r${CRE}${GREEN}$DISTRO ${FOUNDAT}: ${MAGENTA}${BOOTDEV}/$(cd $BOOTISO; ls -a $BOOTFILE)${NORMAL} "
< fi
< fi
< fi
< done
< if [ -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then
< break
< else
< message -n -e "\r${CRE}${BLUE}${WAITFORUSB}${NORMAL} $i ";
< sleep 1
< fi
< done
< fi
< fi
< fi
< if [ -r "$BOOTSYS/$knoppix_dir/KNOPPIX" ]; then MOUNTED="yes"; FOUND_KNOPPIX="true"; fi
< #@@@GvR Bootfrom Section end
<
<
582c459
< amount=$(awk -F: '/^MemTotal/{printf "%d",int($2); exit 0}' /proc/meminfo 2>/dev/null); #'
---
> amount=$(awk -F: '/^MemTotal/{printf "%d",int($2); exit 0}' /proc/meminfo 2>/dev/null)
594,607c471,481
< #@@@GvR add "ramdisk" parameter to allow specifying ramdisk size, otherwise just use max(ram*4/5,2000)M
< for i in $CMDLINE; do case "$i" in [Rr][Aa][Mm][Dd][Ii][Ss][Kk]=*) eval $i;; esac; done
< case "$ramdisk" in
< [0-9]*[KMG]) RAMDISK="$ramdisk" ;;
< esac
< if [ -z "$RAMDISK" ]; then
< if [ "$TOTALMEM" -ge 2000 ] >/dev/null 2>&1; then
< RAMDISK="$(expr $TOTALMEM / 5)"; RAMDISK="$(expr $RAMDISK \* 4)M"
< else
< # Too large, but we can still use swapspace
< RAMDISK="2G"
< fi
< fi
< #@@@GvR
---
> # Return existing device names listed as regular expressions
> listpartitions(){
> local pattern file
> for pattern in "$@"; do
> for file in $(find /sys/class/block -maxdepth 2 -name "$pattern"); do
> file="${file##*/}"
> [ -b "/dev/$file" ] && echo "/dev/$file"
> done
> done
> # awk 'BEGIN{old="__start"}/'"$1"'/{if($0==old){exit}else{old=$0;if($4&&$4!="name"){print "/dev/"$4}}}' /proc/partitions # Insufficient, does not find CD-Roms
> }
609c483
< if [ -z "$FOUND_KNOPPIX" -a -z "$TSCLIENT" ]; then
---
> if [ -z "$TSCLIENT" ]; then
650c524
< mount -t tmpfs -o size="$RAMDISK",dev,suid,exec tmpfs /ramdisk
---
> mount -t tmpfs -o size=2G,dev,suid,exec tmpfs /ramdisk
671c545
< [ -r /KNOPPIX/lib/ld-linux.so.2 -a -x /KNOPPIX/"$cmd" ] && /KNOPPIX/lib/ld-linux.so.2 --library-path "/KNOPPIX/lib:/KNOPPPIX/usr/lib:/KNOPPIX/lib/i386-linux-gnu" /KNOPPIX/"$cmd" "$@"
---
> [ -r /KNOPPIX/lib/ld-linux.so.2 -a -x /KNOPPIX/"$cmd" ] && /KNOPPIX/lib/ld-linux.so.2 --library-path "/KNOPPIX/lib:/KNOPPPIX/usr/lib" /KNOPPIX/"$cmd" "$@"
739c613
< for base in $home /mnt-system/"$knoppix_dir"/knoppix-data /mnt-system/knoppix; do
---
> for base in /mnt-system/"$knoppix_dir"/knoppix-data /mnt-system/knoppix; do
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield
$42.00
***NEW*** BCM RX67Q Gaming Motherboard | Intel Q67 2nd/3rd Gen. | LGA1155 | DDR3
$29.77
Micro ATX Desktop Motherboard ASUS H110M-C LGA 1151
$31.95
Gigabyte AMD B550 UD AC Gaming Motherboard - AMD B550 Chipset - AM4 Socket - AMD
$89.99
ASUS Prime Z390-A LGA 1151 Intel Z390 SATA USB 3.1 ATX Motherboard NO I/O
$99.00
MSI B450M PRO-VDH MAX AM4 AMD B450 USB3.2 Micro-ATX Motherboard
$67.99
Asrock Z390 Phantom Gaming 4S/AC Wifi 8th/9th Gen Intel 1151 Motherboard Bulk
$47.55
Gigabyte Ultra Durable B550 GAMING X V2 Desktop Motherboard
$94.99
***NEW*** BCM RX67Q mATX Gaming Motherboard Combo | Intel i5-3470 | 16GB DDR3
$49.77
GIGABYTE MB10-Datto Motherboard Xeon D-1521- SR2DF 2.40 GHz- Open Box
$121.50