-
If you cannot boot a hard disk install of Knoppix 6.7.1 try the following;
Start installing to the Virtual Machine and set the machine up until you reach the screen which offers to unpower the installation. Do not power the machine, close it down.
When it has closed down select "Edit Virtual Machine" and then follow the instructions here;
http://pubs.vmware.com/ws7_ace26/wwh..._3.html#996821
Use the Disks and Disk Drive section to change the drive to ide.
Now complete the installation of the Live CD and the transfer to HDD.
It should boot normally from the hard disk.
martin welsh
-
"Install Knoppix to flash disk" writing hangs out of KVM with knoppix 7.0.2 beta
i tried this with ubuntu 12.04 LTS
sudo kvm -cdrom Downloads/KNOPPIX_V7.0.2DVD-2012-05-30-EN.iso -boot d -m 512 -usb -device usb-host,hostbus=1,hostaddr=7
"Install Knoppix to flash disk" recognizes the memory stick (16GB in size), formats it, and starts writing. the bar goes right before the end, and then it stalls.
Originally Posted by
Capricorny
Just a remark, I'm bypassing the DVD burning step on the way to USB flash/Poor man's install by running qemu with USB access:
Code:
# lsusb
Bus 002 Device 006: ID 0951:1624 Kingston Technology
.....
#qemu -cdrom /store/download/iso/KNOPPIX_V6.7.0DVD-2011-08-01-EN.iso -hda /store/vm/qemu/knx670_disk.img -m 1024 -boot d -usb -usbdevice host:0951:1624 &
Then, run "Install Knoppix to flash disk" in the virtual machine. We could of course have copied the files directly from loop-mounted ISO, but this method allows us to check things
Also, the purging and installing steps prior to remastering can be carried out in qemu virtual machine sessions, making administrative tasks very much easier.
-
Senior Member
registered user
Originally Posted by
soloturn
i tried this with ubuntu 12.04 LTS
sudo kvm -cdrom Downloads/KNOPPIX_V7.0.2DVD-2012-05-30-EN.iso -boot d -m 512 -usb -device usb-host,hostbus=1,hostaddr=7
"Install Knoppix to flash disk" recognizes the memory stick (16GB in size), formats it, and starts writing. the bar goes right before the end, and then it stalls.
I have had success with a simpler command line for qemu (1.1.0), in Knoppix:
Code:
sudo qemu -cdrom Downloads/KNOPPIX_V7.0.2DVD-2012-05-30-EN.iso -hdb /dev/sdb -boot d -m 512
Seems to be something buggy in detailed USB handling in recent qemu versions, but this wholesale "-hdb" way has worked for me. Haven't tried in other distros, as long as Knoppix does the job.. modprobing kvm and kvm-intel and adding "-machine accel=kvm" makes it run much faster -when hardware allows it.
-
modprobing kvm and kvm-intel and adding "-machine accel=kvm" makes it run much faster -when hardware allows it.
Have a look at Test CD if your computer has AMD processor.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
LSI 9305-16i SATA SAS 12Gbs RAID Controller Host Bus Adapter PCIe 3.0 x8 IT-Mode
$199.99
Dell R630 8SFF 2.4Ghz 20-Core 128GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$455.04
Dell R630 8SFF 1.8Ghz 20-Core 192GB H330 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$570.04
Dell R630 8SFF 2.4Ghz 12-Core 128GB H330 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$430.04
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$87.99
LSI MegaRaid 9361-8i 12Gbps SAS / SATA Raid Controller PCIe x8 3.0 Tested
$29.00
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
Oracle 7332895 LSI MegaRAID 9361-16i 16-PORT 12GB SAS PCIE RAID CONTROLLER
$349.00