-
If you cannot boot a hard disk install of Knoppix 6.7.1 try the following;
Start installing to the Virtual Machine and set the machine up until you reach the screen which offers to unpower the installation. Do not power the machine, close it down.
When it has closed down select "Edit Virtual Machine" and then follow the instructions here;
http://pubs.vmware.com/ws7_ace26/wwh..._3.html#996821
Use the Disks and Disk Drive section to change the drive to ide.
Now complete the installation of the Live CD and the transfer to HDD.
It should boot normally from the hard disk.
martin welsh
-
"Install Knoppix to flash disk" writing hangs out of KVM with knoppix 7.0.2 beta
i tried this with ubuntu 12.04 LTS
sudo kvm -cdrom Downloads/KNOPPIX_V7.0.2DVD-2012-05-30-EN.iso -boot d -m 512 -usb -device usb-host,hostbus=1,hostaddr=7
"Install Knoppix to flash disk" recognizes the memory stick (16GB in size), formats it, and starts writing. the bar goes right before the end, and then it stalls.
Originally Posted by
Capricorny
Just a remark, I'm bypassing the DVD burning step on the way to USB flash/Poor man's install by running qemu with USB access:
Code:
# lsusb
Bus 002 Device 006: ID 0951:1624 Kingston Technology
.....
#qemu -cdrom /store/download/iso/KNOPPIX_V6.7.0DVD-2011-08-01-EN.iso -hda /store/vm/qemu/knx670_disk.img -m 1024 -boot d -usb -usbdevice host:0951:1624 &
Then, run "Install Knoppix to flash disk" in the virtual machine. We could of course have copied the files directly from loop-mounted ISO, but this method allows us to check things
Also, the purging and installing steps prior to remastering can be carried out in qemu virtual machine sessions, making administrative tasks very much easier.
-
Senior Member
registered user
Originally Posted by
soloturn
i tried this with ubuntu 12.04 LTS
sudo kvm -cdrom Downloads/KNOPPIX_V7.0.2DVD-2012-05-30-EN.iso -boot d -m 512 -usb -device usb-host,hostbus=1,hostaddr=7
"Install Knoppix to flash disk" recognizes the memory stick (16GB in size), formats it, and starts writing. the bar goes right before the end, and then it stalls.
I have had success with a simpler command line for qemu (1.1.0), in Knoppix:
Code:
sudo qemu -cdrom Downloads/KNOPPIX_V7.0.2DVD-2012-05-30-EN.iso -hdb /dev/sdb -boot d -m 512
Seems to be something buggy in detailed USB handling in recent qemu versions, but this wholesale "-hdb" way has worked for me. Haven't tried in other distros, as long as Knoppix does the job.. modprobing kvm and kvm-intel and adding "-machine accel=kvm" makes it run much faster -when hardware allows it.
-
modprobing kvm and kvm-intel and adding "-machine accel=kvm" makes it run much faster -when hardware allows it.
Have a look at Test CD if your computer has AMD processor.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Samsung 16GB 2Rx4 PC4-2133P DDR4-17000 1.2V RDIMM ECC Registered Server Memory
$15.49
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
Micron 16GB 2Rx8 PC4-3200AA DDR4 Laptop Memory Ram MTA16ATF2G64HZ
$21.95
HMT41GS6BFR8A-PB SK Hynix 8 GB 2Rx8 PC3L-12800S DDR3 Laptop Memory Ram
$12.00
SK Hynix 8GB (2x4GB) 1Rx8 PC3L-12800 DDR3-1600MHz Laptop Memory HMT451S6AFR8A-PB
$8.25
A-Tech 16GB 2 x 8GB PC3-12800 Laptop SODIMM DDR3 1600 Memory RAM PC3L 16G DDR3L
$27.98
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 128GB 4x 32GB 2Rx4 PC4-19200R DDR4 2400 ECC REG RDIMM Server Memory RAM
$191.96