-
If you cannot boot a hard disk install of Knoppix 6.7.1 try the following;
Start installing to the Virtual Machine and set the machine up until you reach the screen which offers to unpower the installation. Do not power the machine, close it down.
When it has closed down select "Edit Virtual Machine" and then follow the instructions here;
http://pubs.vmware.com/ws7_ace26/wwh..._3.html#996821
Use the Disks and Disk Drive section to change the drive to ide.
Now complete the installation of the Live CD and the transfer to HDD.
It should boot normally from the hard disk.
martin welsh
-
"Install Knoppix to flash disk" writing hangs out of KVM with knoppix 7.0.2 beta
i tried this with ubuntu 12.04 LTS
sudo kvm -cdrom Downloads/KNOPPIX_V7.0.2DVD-2012-05-30-EN.iso -boot d -m 512 -usb -device usb-host,hostbus=1,hostaddr=7
"Install Knoppix to flash disk" recognizes the memory stick (16GB in size), formats it, and starts writing. the bar goes right before the end, and then it stalls.
Originally Posted by
Capricorny
Just a remark, I'm bypassing the DVD burning step on the way to USB flash/Poor man's install by running qemu with USB access:
Code:
# lsusb
Bus 002 Device 006: ID 0951:1624 Kingston Technology
.....
#qemu -cdrom /store/download/iso/KNOPPIX_V6.7.0DVD-2011-08-01-EN.iso -hda /store/vm/qemu/knx670_disk.img -m 1024 -boot d -usb -usbdevice host:0951:1624 &
Then, run "Install Knoppix to flash disk" in the virtual machine. We could of course have copied the files directly from loop-mounted ISO, but this method allows us to check things
Also, the purging and installing steps prior to remastering can be carried out in qemu virtual machine sessions, making administrative tasks very much easier.
-
Senior Member
registered user
Originally Posted by
soloturn
i tried this with ubuntu 12.04 LTS
sudo kvm -cdrom Downloads/KNOPPIX_V7.0.2DVD-2012-05-30-EN.iso -boot d -m 512 -usb -device usb-host,hostbus=1,hostaddr=7
"Install Knoppix to flash disk" recognizes the memory stick (16GB in size), formats it, and starts writing. the bar goes right before the end, and then it stalls.
I have had success with a simpler command line for qemu (1.1.0), in Knoppix:
Code:
sudo qemu -cdrom Downloads/KNOPPIX_V7.0.2DVD-2012-05-30-EN.iso -hdb /dev/sdb -boot d -m 512
Seems to be something buggy in detailed USB handling in recent qemu versions, but this wholesale "-hdb" way has worked for me. Haven't tried in other distros, as long as Knoppix does the job.. modprobing kvm and kvm-intel and adding "-machine accel=kvm" makes it run much faster -when hardware allows it.
-
modprobing kvm and kvm-intel and adding "-machine accel=kvm" makes it run much faster -when hardware allows it.
Have a look at Test CD if your computer has AMD processor.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP
$249.99
GENUINE Cisco SFP-10G-SR V03 10-2415-03 Transceiver Module 850nm 10G SFP+
$6.99
Cisco Catalyst WS-C3750X-48PF-L
$59.99
Cisco C3KX-NM-10G 4-Port SFP 10G Expansion Module 3750-X / 3560-X Switch
$50.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
Cisco QSFP-40G-SR-BD BiDi Short-reach Transceiver, 1 Year Warranty
$17.25
Cisco SFP-10G-LR-S SFP+ 1310nm 10km DOM Transceiver Module 10-3107-01 - 1 Year
$41.59
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
Cisco Meraki MA-SFP-10GB-SR 10G SFP+ SR 850nm 300m LC MMF
$29.99