-
If you cannot boot a hard disk install of Knoppix 6.7.1 try the following;
Start installing to the Virtual Machine and set the machine up until you reach the screen which offers to unpower the installation. Do not power the machine, close it down.
When it has closed down select "Edit Virtual Machine" and then follow the instructions here;
http://pubs.vmware.com/ws7_ace26/wwh..._3.html#996821
Use the Disks and Disk Drive section to change the drive to ide.
Now complete the installation of the Live CD and the transfer to HDD.
It should boot normally from the hard disk.
martin welsh
-
"Install Knoppix to flash disk" writing hangs out of KVM with knoppix 7.0.2 beta
i tried this with ubuntu 12.04 LTS
sudo kvm -cdrom Downloads/KNOPPIX_V7.0.2DVD-2012-05-30-EN.iso -boot d -m 512 -usb -device usb-host,hostbus=1,hostaddr=7
"Install Knoppix to flash disk" recognizes the memory stick (16GB in size), formats it, and starts writing. the bar goes right before the end, and then it stalls.
Originally Posted by
Capricorny
Just a remark, I'm bypassing the DVD burning step on the way to USB flash/Poor man's install by running qemu with USB access:
Code:
# lsusb
Bus 002 Device 006: ID 0951:1624 Kingston Technology
.....
#qemu -cdrom /store/download/iso/KNOPPIX_V6.7.0DVD-2011-08-01-EN.iso -hda /store/vm/qemu/knx670_disk.img -m 1024 -boot d -usb -usbdevice host:0951:1624 &
Then, run "Install Knoppix to flash disk" in the virtual machine. We could of course have copied the files directly from loop-mounted ISO, but this method allows us to check things
Also, the purging and installing steps prior to remastering can be carried out in qemu virtual machine sessions, making administrative tasks very much easier.
-
Senior Member
registered user
Originally Posted by
soloturn
i tried this with ubuntu 12.04 LTS
sudo kvm -cdrom Downloads/KNOPPIX_V7.0.2DVD-2012-05-30-EN.iso -boot d -m 512 -usb -device usb-host,hostbus=1,hostaddr=7
"Install Knoppix to flash disk" recognizes the memory stick (16GB in size), formats it, and starts writing. the bar goes right before the end, and then it stalls.
I have had success with a simpler command line for qemu (1.1.0), in Knoppix:
Code:
sudo qemu -cdrom Downloads/KNOPPIX_V7.0.2DVD-2012-05-30-EN.iso -hdb /dev/sdb -boot d -m 512
Seems to be something buggy in detailed USB handling in recent qemu versions, but this wholesale "-hdb" way has worked for me. Haven't tried in other distros, as long as Knoppix does the job.. modprobing kvm and kvm-intel and adding "-machine accel=kvm" makes it run much faster -when hardware allows it.
-
modprobing kvm and kvm-intel and adding "-machine accel=kvm" makes it run much faster -when hardware allows it.
Have a look at Test CD if your computer has AMD processor.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
HP ProLiant BL460c Gen9 Blade 2x E5-2660v4 2.0GHz =28 Cores 128GB P246 650FLB
$284.00
HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram
$58.52
HP Proliant BL460c G10 Gen10 Blade Server No CPU/No Mem/No Drives
$250.00
Google Search Appliance - Dell PowerEdge R710 x2 Xeon X5690 192GB Memory 6TB HDD
$529.99
727021-B21 HP ProLiant BL460c G9(Gen9) E5 10Gb FlexibleLOM CTO Blade Server
$66.00
HP ProLiant BL460c G9(Gen9) 2x 10 CORE E5-2660v3 2.6GHz 128GB RAM No SSD
$222.00
DELL PowerEdge M630 Blade 2x E5-2683v3 2.0GHz =28 Cores 128GB H330 2x10Gb X520
$288.00