-
If you cannot boot a hard disk install of Knoppix 6.7.1 try the following;
Start installing to the Virtual Machine and set the machine up until you reach the screen which offers to unpower the installation. Do not power the machine, close it down.
When it has closed down select "Edit Virtual Machine" and then follow the instructions here;
http://pubs.vmware.com/ws7_ace26/wwh..._3.html#996821
Use the Disks and Disk Drive section to change the drive to ide.
Now complete the installation of the Live CD and the transfer to HDD.
It should boot normally from the hard disk.
martin welsh
-
"Install Knoppix to flash disk" writing hangs out of KVM with knoppix 7.0.2 beta
i tried this with ubuntu 12.04 LTS
sudo kvm -cdrom Downloads/KNOPPIX_V7.0.2DVD-2012-05-30-EN.iso -boot d -m 512 -usb -device usb-host,hostbus=1,hostaddr=7
"Install Knoppix to flash disk" recognizes the memory stick (16GB in size), formats it, and starts writing. the bar goes right before the end, and then it stalls.

Originally Posted by
Capricorny
Just a remark, I'm bypassing the DVD burning step on the way to USB flash/Poor man's install by running qemu with USB access:
Code:
# lsusb
Bus 002 Device 006: ID 0951:1624 Kingston Technology
.....
#qemu -cdrom /store/download/iso/KNOPPIX_V6.7.0DVD-2011-08-01-EN.iso -hda /store/vm/qemu/knx670_disk.img -m 1024 -boot d -usb -usbdevice host:0951:1624 &
Then, run "Install Knoppix to flash disk" in the virtual machine. We could of course have copied the files directly from loop-mounted ISO, but this method allows us to check things
Also, the purging and installing steps prior to remastering can be carried out in qemu virtual machine sessions, making administrative tasks very much easier.
-
Senior Member
registered user

Originally Posted by
soloturn
i tried this with ubuntu 12.04 LTS
sudo kvm -cdrom Downloads/KNOPPIX_V7.0.2DVD-2012-05-30-EN.iso -boot d -m 512 -usb -device usb-host,hostbus=1,hostaddr=7
"Install Knoppix to flash disk" recognizes the memory stick (16GB in size), formats it, and starts writing. the bar goes right before the end, and then it stalls.
I have had success with a simpler command line for qemu (1.1.0), in Knoppix:
Code:
sudo qemu -cdrom Downloads/KNOPPIX_V7.0.2DVD-2012-05-30-EN.iso -hdb /dev/sdb -boot d -m 512
Seems to be something buggy in detailed USB handling in recent qemu versions, but this wholesale "-hdb" way has worked for me. Haven't tried in other distros, as long as Knoppix does the job.. modprobing kvm and kvm-intel and adding "-machine accel=kvm" makes it run much faster -when hardware allows it.
-
modprobing kvm and kvm-intel and adding "-machine accel=kvm" makes it run much faster -when hardware allows it.
Have a look at Test CD if your computer has AMD processor.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

HPE ProLiant BL460c Gen8 735151-B21 E5-v2 Blade Server LOADED w 512 GIGS MEMORY
$280.00

Dell PowerEdge FX2S FC830 Blade Server Chassis Enclosure 2*2000W PSU NO BLADES
$179.99

Dell XJ6VP PowerEdge FX2S 4 Slot Blade Chassis PEFX2S 2x Power Supply *No blades
$309.12

HP ProLiant BL460c Gen9 Blade 2x E5-2667v3 3.2GHz =16 Cores 256GB P244BR 650FLB
$303.00

Dell Poweredge R210 II Server Xeon E3-1230 3.2ghz Quad 16GB No HDD 2x HDD Caddy
$55.00

Dell PowerEdge VRTX Blade Server Enclosure Chassis Only NO HDD NO OS NO Blades
$399.99

Dell PowerEdge M630 / HHB Server Module w 2x Intel E5-2680 & Dell P3V42 No HDD
$64.99

Zima BLADE ZBB001-BK20032 NEW SEALED
$83.66

DELL PowerEdge M630 Blade 2x E5-2697v3 2.6GHz =28 Cores 256GB H330 2x10Gb X520
$333.00

DELL PowerEdge M630 Blade 2x E5-2667v4 3.2GHz =16 Cores 256GB H330 2x10Gb X520
$363.00