FWIW, no significant delay in normal (not pxe) use of dhcp.
Im booting Knoppix 6.7 via pxe. Once Knoppix starts to load I get delay in DHCP during boot. The sending dhcp message appears for quiet some time. Then knoppix goes about its boot. The unit has an ip from the pxe process. So my question is, is this a knoppix delay or my pxe server? Any ideas?
Thanks!
FWIW, no significant delay in normal (not pxe) use of dhcp.
So called normal use of DHCP within Knoppix doesnt begin until after X has started/loaded. Knoppix needs IP before X when pxe booting. I think it may be within minirt.gz the ini file itself. ?
I've contributed all I know for sure on this.
But if pxe needs IP early, why isn't the server providing it already?
Are you able to decode minirt.gz and read the init?
Yes, Ive just started to dig thru ini. I think DHCP server is confused by knoppix asking for an ip from the same mac addy that just requested ip?
FWIW,
In 6.4.4 my LiveUSB took almost 120 seconds to get on-line initially.
I finally disabled Network Manager and got down to about 55-or so seconds
using a primitive /etc/rc.local routine to get my wifi going.
In 6.7, there was no similar slow start to getting on-line in less than
a minute and no need to circumvent Network Manager.
Obviously either Knoppix or Network Manager must have changed between
6.4.4 and 6.7. If you don't find the answer in minirt.gz, then you might
see if there's some difference in NM that explains your situation.
Thanks for those ideas. I will post my findings. May take me a few days.
DELL PowerEdge R730XD Server 2x E5-2690v4 2.6GHz =28 Cores 64GB H730 4xRJ45
$387.00
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$169.95
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$153.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell Poweredge R730xd 12 Bay LFF 2x SFF 2x E5-2680v3 2.5ghz H730p No Ram No HDD
$219.99
Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD 
$180.00
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 256GB H730 4xRJ45
$562.00
DELL PowerEdge R730 Server 2x E5-2698v4 2.2GHz =40 Cores 128GB H730 4xRJ45
$601.00