Results 1 to 7 of 7

Thread: DHCP

  1. #1
    Senior Member
    Join Date
    Jul 2011
    Posts
    110

    DHCP

    Im booting Knoppix 6.7 via pxe. Once Knoppix starts to load I get delay in DHCP during boot. The sending dhcp message appears for quiet some time. Then knoppix goes about its boot. The unit has an ip from the pxe process. So my question is, is this a knoppix delay or my pxe server? Any ideas?
    Thanks!

  2. #2
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    FWIW, no significant delay in normal (not pxe) use of dhcp.

  3. #3
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    So called normal use of DHCP within Knoppix doesnt begin until after X has started/loaded. Knoppix needs IP before X when pxe booting. I think it may be within minirt.gz the ini file itself. ?

  4. #4
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    I've contributed all I know for sure on this.
    But if pxe needs IP early, why isn't the server providing it already?

    Are you able to decode minirt.gz and read the init?

  5. #5
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Yes, Ive just started to dig thru ini. I think DHCP server is confused by knoppix asking for an ip from the same mac addy that just requested ip?

  6. #6
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    FWIW,

    In 6.4.4 my LiveUSB took almost 120 seconds to get on-line initially.
    I finally disabled Network Manager and got down to about 55-or so seconds
    using a primitive /etc/rc.local routine to get my wifi going.

    In 6.7, there was no similar slow start to getting on-line in less than
    a minute and no need to circumvent Network Manager.

    Obviously either Knoppix or Network Manager must have changed between
    6.4.4 and 6.7. If you don't find the answer in minirt.gz, then you might
    see if there's some difference in NM that explains your situation.

  7. #7
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Thanks for those ideas. I will post my findings. May take me a few days.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Apple Color RGB High Resolution Monitor M1297 VTG 1992 WORKS picture

Apple Color RGB High Resolution Monitor M1297 VTG 1992 WORKS

$136.43



Vintage Franklin Ace 1000 Computer Apple II Clone  Untested picture

Vintage Franklin Ace 1000 Computer Apple II Clone Untested

$200.00



Vintage Apple Logo Calculator. New in original box.  LAST ONE................... picture

Vintage Apple Logo Calculator. New in original box. LAST ONE...................

$29.00



Apple III Monitor A3M0039 - Rare Vintage Apple picture

Apple III Monitor A3M0039 - Rare Vintage Apple

$130.00



Vintage 1987 Apple M0110A Keyboard - Works picture

Vintage 1987 Apple M0110A Keyboard - Works

$75.00



Vintage Apple Macintosh Keyboard II M0487 (Lot 3 Keyboards,1 Mouse) picture

Vintage Apple Macintosh Keyboard II M0487 (Lot 3 Keyboards,1 Mouse)

$25.00



Vintage Classic Apple Macintosh System Boot Install Disk Floppy/CD *Pick Version picture

Vintage Classic Apple Macintosh System Boot Install Disk Floppy/CD *Pick Version

$10.39



Vintage Apple Power Macintosh 7300/200 32MB RAM no HD, powers on but no display picture

Vintage Apple Power Macintosh 7300/200 32MB RAM no HD, powers on but no display

$60.00



Vintage 1980's Apple Macintosh Plus Wooden Storage Box - With Floppy Disc Lot picture

Vintage 1980's Apple Macintosh Plus Wooden Storage Box - With Floppy Disc Lot

$89.98



Vintage Apple Macintosh 6100/66 PowerPC 601 66MHz 8MB Retro Desktop Computer PC picture

Vintage Apple Macintosh 6100/66 PowerPC 601 66MHz 8MB Retro Desktop Computer PC

$169.99