Results 1 to 7 of 7

Thread: DHCP

  1. #1
    Senior Member
    Join Date
    Jul 2011
    Posts
    110

    DHCP

    Im booting Knoppix 6.7 via pxe. Once Knoppix starts to load I get delay in DHCP during boot. The sending dhcp message appears for quiet some time. Then knoppix goes about its boot. The unit has an ip from the pxe process. So my question is, is this a knoppix delay or my pxe server? Any ideas?
    Thanks!

  2. #2
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    FWIW, no significant delay in normal (not pxe) use of dhcp.

  3. #3
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    So called normal use of DHCP within Knoppix doesnt begin until after X has started/loaded. Knoppix needs IP before X when pxe booting. I think it may be within minirt.gz the ini file itself. ?

  4. #4
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    I've contributed all I know for sure on this.
    But if pxe needs IP early, why isn't the server providing it already?

    Are you able to decode minirt.gz and read the init?

  5. #5
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Yes, Ive just started to dig thru ini. I think DHCP server is confused by knoppix asking for an ip from the same mac addy that just requested ip?

  6. #6
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    FWIW,

    In 6.4.4 my LiveUSB took almost 120 seconds to get on-line initially.
    I finally disabled Network Manager and got down to about 55-or so seconds
    using a primitive /etc/rc.local routine to get my wifi going.

    In 6.7, there was no similar slow start to getting on-line in less than
    a minute and no need to circumvent Network Manager.

    Obviously either Knoppix or Network Manager must have changed between
    6.4.4 and 6.7. If you don't find the answer in minirt.gz, then you might
    see if there's some difference in NM that explains your situation.

  7. #7
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Thanks for those ideas. I will post my findings. May take me a few days.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Vintage Computer, Memorex Storage Unit For Main Frame Computer 1986, Movie Prop  picture

Vintage Computer, Memorex Storage Unit For Main Frame Computer 1986, Movie Prop

$995.00



IBM Model M 1391401 Mechanical Keyboard Vintage Mainframe 1984 missing Shift Key picture

IBM Model M 1391401 Mechanical Keyboard Vintage Mainframe 1984 missing Shift Key

$65.00



IBM FRU26F7630 3390 DASD Hard Drive 10.8” from Vintage Mainframe picture

IBM FRU26F7630 3390 DASD Hard Drive 10.8” from Vintage Mainframe

$249.99



Vintage Computer Punch Plug Board Mainframe Panels & Wiring Harness picture

Vintage Computer Punch Plug Board Mainframe Panels & Wiring Harness

$40.00



*PAIR* 1960's Vintage GE-600 Series Mainframe Computer PCBs Bitslice Accumulator picture

*PAIR* 1960's Vintage GE-600 Series Mainframe Computer PCBs Bitslice Accumulator

$14.95



Hard to Find Apple Lisa 2

Hard to Find Apple Lisa 2 "Lite" Interface Card - USED/PULL

$55.25



IBM mainframe server cpu IBM93 vintage cpu collector's item picture

IBM mainframe server cpu IBM93 vintage cpu collector's item

$125.99



10pcs VINTAGE MAINFRAME COMPUTER PUNCH CARDS. IBM 5081 80-column OLD STOCK picture

10pcs VINTAGE MAINFRAME COMPUTER PUNCH CARDS. IBM 5081 80-column OLD STOCK

$12.49



JINX Gaming Computer Mainframe Rare Collectible  picture

JINX Gaming Computer Mainframe Rare Collectible

$500.00



AlphaServer AlphaStation DS25 54-30466-31 CPU Board 1Ghz KN410-CA  picture

AlphaServer AlphaStation DS25 54-30466-31 CPU Board 1Ghz KN410-CA

$350.00