Hi all,
I am new to the forum and here because I have been working on the same project for the past three days. Just today I learned of Knoppix, but I have done alot of research and I feel I have a good grasp on it.
Here's my problem: I purchased an Intel 6300 wifi card (from eBay thinking that I could save some money). Ofcourse the card has a PCI ID that is one digit off from passing the laptop's whitelist. I do however have another laptop without a whitelist that the card is currently in. Knoppix 6.7.0 boots without errors and detects the card (wlan0, I can connect to my wireless network). Yet ethool (root shell) is giving me problems. The two commands I need to use, "ethtool -e wlan0" and "ethtool -E wlan0..." give the error "Cannot get EEPROM data: Operation not supported".
What should I do? Any help would be greatly appreciated. Thanks in advance.
Vintage Apple IIe 2e iie Personal Computer A2S2064 V1718 *TESTED AND WORKING*
$175.00
Vintage Apple A2M2010 Monitor II, Green Phosper CRT
$99.99
Macintosh Classic M0420 vintage apple computer TURNS ON WORKS
$240.00
Vintage Apple Macintosh 512K / Mouse, Keyboard & Extras + Carry Case / Turns On
$260.00
Rare Vintage Apple 630-0101 128K/512K Macintosh Logic Motherboard - UNTESTED
$60.00
Apple Computer Vintage sheet of 1990s rainbow logo stickers 2 Sticker Sheet
$4.80
RARE PROTOTYPE - Vintage Apple Computer Lisa 2/10 - Service & X/ProFile Drive
$9500.00
Serviced & Loaded Vintage Apple Lisa 2/10 System 2mb, SCSI, Parallel, X/ProFile
$6500.00
Rare Vintage Apple Macintosh Powerbook 160 9.8" Screen Laptop - UNTESTED
$49.99
VINTAGE Macintosh PowerBook 1400cs /117 early apple laptop 1996 - IN BOX READ
$399.99