FWIW, no significant delay in normal (not pxe) use of dhcp.
Im booting Knoppix 6.7 via pxe. Once Knoppix starts to load I get delay in DHCP during boot. The sending dhcp message appears for quiet some time. Then knoppix goes about its boot. The unit has an ip from the pxe process. So my question is, is this a knoppix delay or my pxe server? Any ideas?
Thanks!
FWIW, no significant delay in normal (not pxe) use of dhcp.
So called normal use of DHCP within Knoppix doesnt begin until after X has started/loaded. Knoppix needs IP before X when pxe booting. I think it may be within minirt.gz the ini file itself. ?
I've contributed all I know for sure on this.
But if pxe needs IP early, why isn't the server providing it already?
Are you able to decode minirt.gz and read the init?
Yes, Ive just started to dig thru ini. I think DHCP server is confused by knoppix asking for an ip from the same mac addy that just requested ip?
FWIW,
In 6.4.4 my LiveUSB took almost 120 seconds to get on-line initially.
I finally disabled Network Manager and got down to about 55-or so seconds
using a primitive /etc/rc.local routine to get my wifi going.
In 6.7, there was no similar slow start to getting on-line in less than
a minute and no need to circumvent Network Manager.
Obviously either Knoppix or Network Manager must have changed between
6.4.4 and 6.7. If you don't find the answer in minirt.gz, then you might
see if there's some difference in NM that explains your situation.
Thanks for those ideas. I will post my findings. May take me a few days.
CISCO 5108 Blade Server Chassis N20-C6508
$200.00
DELL POWEREDGE M620 SERVER BLADE INTEL XEON E5-2670 @ 2.60GHZ 128GB RAM 2X 146GB
$399.00
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell M630 PowerEdge Blade Server
$700.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99