Results 1 to 7 of 7

Thread: DHCP

  1. #1
    Senior Member
    Join Date
    Jul 2011
    Posts
    110

    DHCP

    Im booting Knoppix 6.7 via pxe. Once Knoppix starts to load I get delay in DHCP during boot. The sending dhcp message appears for quiet some time. Then knoppix goes about its boot. The unit has an ip from the pxe process. So my question is, is this a knoppix delay or my pxe server? Any ideas?
    Thanks!

  2. #2
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    FWIW, no significant delay in normal (not pxe) use of dhcp.

  3. #3
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    So called normal use of DHCP within Knoppix doesnt begin until after X has started/loaded. Knoppix needs IP before X when pxe booting. I think it may be within minirt.gz the ini file itself. ?

  4. #4
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    I've contributed all I know for sure on this.
    But if pxe needs IP early, why isn't the server providing it already?

    Are you able to decode minirt.gz and read the init?

  5. #5
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Yes, Ive just started to dig thru ini. I think DHCP server is confused by knoppix asking for an ip from the same mac addy that just requested ip?

  6. #6
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    FWIW,

    In 6.4.4 my LiveUSB took almost 120 seconds to get on-line initially.
    I finally disabled Network Manager and got down to about 55-or so seconds
    using a primitive /etc/rc.local routine to get my wifi going.

    In 6.7, there was no similar slow start to getting on-line in less than
    a minute and no need to circumvent Network Manager.

    Obviously either Knoppix or Network Manager must have changed between
    6.4.4 and 6.7. If you don't find the answer in minirt.gz, then you might
    see if there's some difference in NM that explains your situation.

  7. #7
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Thanks for those ideas. I will post my findings. May take me a few days.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Grandstream GS-HT802 2 Port Analog Telephone Adapter VoIP Phone & Device, Black picture

Grandstream GS-HT802 2 Port Analog Telephone Adapter VoIP Phone & Device, Black

$32.00



Yealink T54W IP Phone, 16 VoIP Accounts. 4.3-Inch Color Display - Black picture

Yealink T54W IP Phone, 16 VoIP Accounts. 4.3-Inch Color Display - Black

$99.99



Yealink SIP-T41P PoE Ultra Elegant VoIP Phone  picture

Yealink SIP-T41P PoE Ultra Elegant VoIP Phone

$29.95



Cisco CP-8821-K9 Wireless IP VoIP Phone WITH BATTERY picture

Cisco CP-8821-K9 Wireless IP VoIP Phone WITH BATTERY

$199.99



Yealink W73H IP DECT VOIP Phone picture

Yealink W73H IP DECT VOIP Phone

$10.00



Cisco CP-7945G VOIP Phone With Stand & Handset Business IP Phone 7945 picture

Cisco CP-7945G VOIP Phone With Stand & Handset Business IP Phone 7945

$3.00



Polycom VVX310 VVX 310 6-Line Business VoIP Media Phone 2201-46161-001 picture

Polycom VVX310 VVX 310 6-Line Business VoIP Media Phone 2201-46161-001

$19.95



Cisco CP-8845-K9 5 Line IP Video Phone - Charcoal picture

Cisco CP-8845-K9 5 Line IP Video Phone - Charcoal

$25.00



Yealink T53W IP Phone, 12 VoIP Accounts. 3.7-Inch Display w/o Adapter - Black picture

Yealink T53W IP Phone, 12 VoIP Accounts. 3.7-Inch Display w/o Adapter - Black

$69.95



Cisco 8841 CP-8841-K9 VoIP Business IP Phone (Charcoal) picture

Cisco 8841 CP-8841-K9 VoIP Business IP Phone (Charcoal)

$50.00