Hi all,
I am new to the forum and here because I have been working on the same project for the past three days. Just today I learned of Knoppix, but I have done alot of research and I feel I have a good grasp on it.
Here's my problem: I purchased an Intel 6300 wifi card (from eBay thinking that I could save some money). Ofcourse the card has a PCI ID that is one digit off from passing the laptop's whitelist. I do however have another laptop without a whitelist that the card is currently in. Knoppix 6.7.0 boots without errors and detects the card (wlan0, I can connect to my wireless network). Yet ethool (root shell) is giving me problems. The two commands I need to use, "ethtool -e wlan0" and "ethtool -E wlan0..." give the error "Cannot get EEPROM data: Operation not supported".
What should I do? Any help would be greatly appreciated. Thanks in advance.
Cisco SFP-10G-SR SFP Transceiver Module
$13.00
XGS-PON ONU SFP+ Stick MAC SC/APC 1270/1577nm -40 to 85°C 10G/10G XGSPON ONT
$199.99
Lot of 10 Cisco SFP-10G-SR 10-2415-03 V03 10GBase-SR 850nmSFP+Transceiver Module
$34.95
For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Transceiver, SFP+ to RJ45 10GBase-T
$40.99
🔥🔥🔥Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver 10-2415-03 🔥🔥🔥
$8.00
INTEL 10G SFP+ SR SFP E10GSFPSR FTLX8571D3BCV-IT For X520-DA2 X520-SR2 X710-DA2
$9.49
Cisco SFP-10G-SR 10-2415-03 10 Gigabit Transceiver LOT OF 8
$24.00
FTLX1471D3BCL Finisar 10Gb 10km 1310nm Single Mode Datacom SFP+ Transceiver
$5.99
♻️ Lot of 3 Finisar FTLX8574D3BCL 10G SFP+ SR Transceiver Module ⚡Fast Ship
$14.00
$94.09