Hi all,
I'm trying to get ANY distro onto a C3 based board but keep coming up against the CMOV issue, everyone is still compiling for i686 and labelling as i386 it seems. Is knoppix doing the same and is there a version compiled without the requirement for CMOV or am I basically forced into junking this board?
Cheers!
OK, cheers - so from what I can tell i486 should run fine on an eden processor without cmov etc. Thanks, I didn't want to download the ISO to check the config file (limited bandwidth) and wasn't sure where to find an example of it outside there.
Ta
NETAPP HCI NAF-1701 SuperMicro Server 4X H410C 8X GOLD 6138 7X 240G NVMe 4X S25G
$999.97
DELL POWEREDGE M620 2x INTEL XEON E5-2630v2 32GB RAM No Drive
$79.99
Cisco UCS B200 M4 Blade Server 2X E5-2697A V4 18C 2.60GHZ 512GB RAM No HD
$299.00
HP ProLiant BL460c Gen9 Blade 2x E5-2697v4 2.3GHz =36 Cores 256GB P244BR 650FLB
$428.00
Dell PowerEdge VRTX with 4x M630 Blade 8x E5-2620 V4 PERC8
$799.99
Dell PowerEdge FX2 FX2s Server 10GbE CMC Blade Enclosure Chassis
$299.99
Dell Poweredge M640 Blade Server x2 Intel Xeon Gold 6136 3.00GHz 32GB No HDD
$179.99
Cisco UCSB-B200-M5 UCS B200 M5 2 Bay Blade Server 2.5" 24-DIMM DDR4 12VDC
$200.00
HP ProLiant BL460c Gen9 Blade 2x E5-2699v3 2.3GHz =36 Cores 64GB P244BR 650FLB
$236.00
HP ProLiant BL460c Gen9 Blade 2x E5-2667v3 3.2GHz =16 Cores 256GB P244BR 650FLB
$328.00