Hi all,
I'm trying to get ANY distro onto a C3 based board but keep coming up against the CMOV issue, everyone is still compiling for i686 and labelling as i386 it seems. Is knoppix doing the same and is there a version compiled without the requirement for CMOV or am I basically forced into junking this board?
Cheers!
OK, cheers - so from what I can tell i486 should run fine on an eden processor without cmov etc. Thanks, I didn't want to download the ISO to check the config file (limited bandwidth) and wasn't sure where to find an example of it outside there.
Ta
Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD
$75.00
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2294.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB
$3299.99
HP ProLiant BL460c G8(Gen8) 2x 8 CORE E5-2670 2.6GHz 192GB RAM 2x 146GB SAS HDD
$78.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
DELL POWEREDGE M620 Blade 2x Xeon E5-2670 2.5GHz 128GB 2x300GB HDD
$94.50
Dell PowerEdge FC630 Xeon E5-2699 v4 256 GB DDR4 1U Server No Drives/No OS B9
$424.99
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$349.00