Hi all,
I'm trying to get ANY distro onto a C3 based board but keep coming up against the CMOV issue, everyone is still compiling for i686 and labelling as i386 it seems. Is knoppix doing the same and is there a version compiled without the requirement for CMOV or am I basically forced into junking this board?
Cheers!
OK, cheers - so from what I can tell i486 should run fine on an eden processor without cmov etc. Thanks, I didn't want to download the ISO to check the config file (limited bandwidth) and wasn't sure where to find an example of it outside there.
Ta
Dell PowerEdge R710 8SFF 2U Server 2x X5680 3.33GHZ 12-Cores / 128gb / 2x Trays
$184.99
Dell PowerEdge R630 Server 2x E5-2697v3 2.60Ghz 28-Core 128GB H730P Rails
$278.45
Dell PowerEdge R730 Server w Trays 128Gb 2x12c=24c CPUs 80Gb SSD/2x4Tb Proxmox
$400.00
Poweredge R730 8SFF 2xE5-2650v4 2.2GHZ=24Core 64GB 8x120GB SSD H330
$199.99
Dell Poweredge R630 2x Xeon E5-2670 v3 2.3ghz 24-Cores 32gb 180GB SSD 495w
$179.99
Dell Poweredge R730xd 24SFF 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$194.99
Dell Poweredge R630 2x Xeon E5-2690 v3 2.6ghz 24-Cores 32gb 480GB SSD 495w
$139.99
Dell PowerEdge R630 Server 2x E5-2697v3 2.60Ghz 28-Core 32GB H730P
$235.75
Dell Poweredge R730xd 24SFF 2x E5-2670 v3 2.3ghz 24-Cores 64gb H730 2x 750w
$194.99
Dell R640 8x 2.5" SFF Server iDRAC - Wholesale Custom Build Your Server
$289.99