-
fake hardware raid5
Hello,
I am trying to mount an existing windows partition with knoppix. The purpose is to make a dump of the windows installation.
There is an Intel 82801 SATA RAID Controller (rev 05) in the system. There are 4 HDs. 3 are arranged as an RAID5 and one is spare. I use knoppix 6.7.1 CD (german).
dmraid -b shows all 4 HDs.
When I try "dmraid -ay" I get 3 errors:
Code:
ERROR: spare set "isw_diffiigjfb_/dev/sdd" cannot be activated
ERROR: no mapping possible for RAID set isw_diffiigjfb_/dev/sdd
ERROR: device-mapper target type "raid45" is not in the kernel
RAID set "isw_gcdfjaffh_Volume0" was not activated
The first two belong to the spare device as sdd is the spare device (compared serial numbers in BIOS config and dmraid -b). The third one produces a lot of google-hits and seems to be a well known version/naming issue between dmraid a kernel. But I did not get any Information on how to fix/ work around it.
There is a kernel module called raid456.ko and it is loaded according to lsmod.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Knoppix 9.1 Live Linux GNU Bootable USB Flash Drive USA
$19.99
Knoppix Live GNU Linux System 9.1 on Bootable CD / DVD / USB Flash Drive
$9.99
Linux Knoppix 4.0.2 Installation Disc
$29.99
KNOPPIX 9.1 LINUX INSTALL & LIVE DVD
$9.99
Knoppix NSM 1.2
$6.40
Knoppix Linux Bootable OS v8.6 "Original Live Operating System" 32G USB Stick
$20.30
Hamshack Live DVD-ROM
$8.00
Acer Aspire One 9 inch Netbook ZG5 512MB RAM 8GB SSD HD Knoppix Linux WiFi VGA
$79.99
Knoppix 3.4 Linux installation CD
$10.00
Knoppix Linux Bootable OS v8.6 "Original Live Operating System" 16G USB Stick
$19.95