How do you connect by static settings, DHCP do you use PPPoE ? If you use PPPoE (you have to connect it's not always on) then there is a tool in the Knoppix menu IIRC. If you could provide a little more information it would be easier to help.
hey guys,
I just started playing around a wee bit today with knoppix for the first time. keep in mind im a complete and total newb to linux :X Ive been searching forums, knoppix help, and either i cant find it or its just not there, but how do I get my cable modem to work through knoppix? its a motorola surfboard thru earthlink, running through a linksys NIC. i just cant find an option anywhere in the gui to configure my cable modem! what am I doing wrong, or what am i not doing?
How do you connect by static settings, DHCP do you use PPPoE ? If you use PPPoE (you have to connect it's not always on) then there is a tool in the Knoppix menu IIRC. If you could provide a little more information it would be easier to help.
honestly i know as little about cable networking as i do about linux. I do not have to dial up. i just installed my nic card, plugged everything in, and ran the windows connection wizard. i know my internet is always connected and i do NOT have to do anything to access the internet. just turn the comp on and its there. thats about all i know about it :\
Well in that case you are more than likely connecting via DHCP. Some things you can try:
Open a console window (the clam shell icon in the taskbar) and enter netcardconfig for the network card configuration tool and agree yes to dhcp and you will see messages in the window to tell if it has been successful (if not post the error). Also in the console window ifconfig eth0 will tell you the settings of your ethernet card. You can also use the ping command to see if you can contact the internet eg. ping www.google.com or ping 216.239.39.99 which is google's IP address. Whatever errors if any you get post them.
Also be a little more specfic as to the steps you have tried eg. I turned on the computer and booted the CD when I enter some address in Mozilla and try to connect I get this error blah blah ... that sort of thing will help to get it working.
when i ran netcardconfig it said:
"sending DHCP broadcast from device eth0Operation failed. failed."
when i ran ifconfig eth0 everything was zero except for dropped received packets, which was 378.
anything else ya need to know?
In a console window the output of :Originally Posted by beetlebz
lspci -v
dmesg | grep eth0
lsmod
and the model number of the network card (should be in the output of lspci if not include).
errr sorry stephen, I got suddenly very busy with work and ran out of time to play with linux
I'll come back and figure it out once and for all when I finish building my filesharing box
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 64GB H730 4xRJ45
$318.00
Dell PowerEdge R620 Dual Intel Xeon E5-2697 v2 @2.70GHz 128GB RAM No HDD S110
$144.50
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$130.49
Dell PowerEdge R730, 2 sinks, SystemBoard, 8 trays,H330,Idrac 8 exp, 2x750w Psu
$135.00
Dell PowerEdge R430 - E5-2640 v3 2.60GHz 16GB RAM - NO HDDs
$119.99
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$313.33
DELL POWEREDGE R420 SERVER With E5-2420 v2 2.2 Ghz, 32GB RAM and Perc H710
$124.99
R630 DELL 8 x 2.5'' POWEREDGE 2X E5-2660V3 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$159.95
Dell Desktop Quad Core i5 8400 500GB SSD + 2TB HDD 32GB RAM Window Server 2022
$301.73
DELL PowerEdge R520,Server 2x Xeon E5-2440 0, 32GB DDR3L, No HDDs, No OS, "A"
$149.99