-
problem connecting dsl - pppoe in knopix 6.7.1
hi
in knoppix 6.7.1 when i try to set up dsl connection
i am unable to set up connection for all users and when i pres "ok" for dsl /pppoe connection
the icon of netrwork management disappears and the connection is not established
so i can not use network in knoppix 6.7.1
what can i do to have working network ?
thanks best regards
-
Hi There Not sure what sort of install of knoppix you have - here are two things to think about: if it's a flash-knoppix install - check Werner's reply to my post here: http://www.knoppix.net/forum/threads...7-boot-only-cd Otherwise, have you tried typing in nm-connection-editor at a root terminal so you can edit/set up your connection as root rather than as user knoppix as you do if you edit connection directly by left clicking on connection icon in panel. I don't know anything about your specific type of correction but this has helped in other cases. Best wishes, John
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Seagate Exos X18 18TB 7200RPM 256MB SATA6Gb/s 3.5" Enterprise HDD -ST18000NM014J
$188.50

Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$109.95

1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed
$45.95

881507-001 881457-B21 876939-002 HPE 2.4TB 10K 12G 2.5"SAS SC 512E DS HARD DRIVE
$203.99

Hard Drive, SATA , 3.5", 500GB HDD, Mixed Brands (pallet)
$3.99

WL 4TB 64MB Cache 7200RPM (Enterprise Grade) SATA 6Gb/s 3.5" Internal Hard Drive
$38.88

Toshiba 4TB MG04ACA400N 3.5" SATA 6Gb/s 7200RPM 64MB Internal NAS Hard Drive
$39.99

Seagate ST8000NC0002 8TB 7200RPM 256MB 6Gb/s 3.5" Hard Drive (NAS, CCTV, PC/MAC)
$79.99

Seagate EXOS X14 ST14000NM0408 14TB 256MB 7200rpm 3.5" SATA 6Gb/s Enterprise HDD
$124.99

Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$49.95