Results 1 to 3 of 3

Thread: Net via Bluetooth

  1. #1
    Junior Member
    Join Date
    Nov 2011
    Posts
    1

    Net via Bluetooth

    Hi. I am new to Knoppix. I have a laptop with a crashed IDE hard drive. I am thinking of using Knoppix on a flash drive to run it.
    When I had windows on it I used a pair of bluetooth dongles to pair the laptop with my PC and shared the PC's internet (wired) connection. and used the PC's internet connection to go on the net with the laptop. I don't have a wireless router. And the laptop did not come with Bluetooth.
    Can this be done with Knoppix. Could knopppix use bluetooth to access a windows PC's internet connection.
    Thank you.

  2. #2
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    @ Capt_T

    Welcome to the forum.

    You can access the internet either by ethernet or wifi wireless
    independent of a Windows setup with either Knoppix LiveUSB or LiveCD.
    Using Bluetooth to tap into a Windows setup is unnecessary.

    I usually make a LiveCD and from that a LiveUSB. Look for Knoppix 6.7.1;
    but, be aware that the ADRIANE versions are for 'vision-challenged' users.

    Also, I think it may be possible to make a Knoppix LiveUSB in Windows using a
    Pendrive program without first making a LiveCD.

    Keep us informed of your progress.

  3. #3
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    @ Capt_T

    Knoppix can be used to create a PAN using bluetooth adapters. I succeeded in connecting a Knoppix V6.7.1 notebook to a Windows 7 Pro system. I used Knoppix 6.7.1 CD and had to add a package bluez-compat containing the program pand. I had to create a configuration file /etc/dbus-1/system.d/bluetooth.conf that is missing in Knoppix V6.7.1 because the bluetooth was not allowed to connect to the D-Bus. I copied the configuration file from Knoppix 6.4.4 and added one line. The current file has the following content
    Code:
    <!-- This configuration file specifies the required security policies
         for Bluetooth core daemon to work. -->
    
    <!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
     "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
    <busconfig>
    
      <!-- ../system.conf have denied everything, so we just punch some holes -->
    
      <policy user="root">
        <allow own="org.bluez"/>
        <allow send_destination="org.bluez"/>
    
        <!-- allow root to send to agents -->
        <allow send_interface="org.bluez.Agent"/>
        <allow send_interface="org.bluez.Proximity"/>
    
      </policy>
    
      <!-- allow users at the console, see consolekit or libpam-foreground -->
      <policy at_console="true">
        <allow send_destination="org.bluez"/>
      </policy>
    
      <!-- allow users of bluetooth group to communicate with hcid -->
      <policy group="bluetooth">
        <allow send_destination="org.bluez"/>
      </policy>
    
      <policy context="default">
        <deny send_destination="org.bluez"/>
      </policy>
    
    </busconfig>
    I downloaded and installed the package bluez-compat and created the the configuration file. Then I configured my Windows 7 Pro system so that it accepted bluetooth connections and served as DHCP server. Afterwards I plugged in my second USB bluetooth adapter at my Knoppix system. Afer having waited a few seconds I issued
    Code:
    hciconfig
    lsmod |grep bnep
    hcitool scan
    The first command told that the bluetooth was up and running. The second one said that the kernel module bnep was installed. The last command showed bluetooth systems waiting for connections. I issued
    Code:
    bluetooth-wizard
    and was able to connect to the bluetooth adapter of my Windows 7 system. From the hcitool command I knew the MAC address of the Windows 7 system (00:1F:23:34:45:67). I issued
    Code:
    sudo pand --role PANU --service GN --nodetach -c 00:1F:23:34:45:67
    and created a PAN. The last step was to fetch the network configuration from the DHCP server. Therefore I issued
    Code:
    sudo dhclient bnep0
    ifconfig bnep0
    and saw that the new network adapter was properly configured. I also learned the IP address of my Knoppix system.

    On the Knoppix system I started the ssh server and connected to it from the Windows 7 system using the program WinSCP with the IP address I learned before. I did not experienced any problems in doing so.

    The Windows 7 system is connected to the WLAN. I was not able to establish a connection between the PAN and the WLAN. Thus I cannot reach the Internet from my notebook via bluetooth although I entered the nameserver of the WLAN in the file /etc/resolv.conf.

    Does anybody know how to connect the two networks on the Windows 7 Pro system?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


1PC Matching pair Xeon CPU Processor X5660 X5670 X5675 X5680 X5690 LGA1366 picture

1PC Matching pair Xeon CPU Processor X5660 X5670 X5675 X5680 X5690 LGA1366

$35.13



Intel - Core i9-12900K Desktop Processor 16 (8P+8E) Cores up to 5.2 GHz Unloc... picture

Intel - Core i9-12900K Desktop Processor 16 (8P+8E) Cores up to 5.2 GHz Unloc...

$331.99



Intel - Core i7-12700K Desktop Processor 12 (8P+4E) Cores up to 5.0 GHz Unloc... picture

Intel - Core i7-12700K Desktop Processor 12 (8P+4E) Cores up to 5.0 GHz Unloc...

$236.99



Intel 6 Core i5-8600 3.1GHZ Desktop Processor SR3X0 picture

Intel 6 Core i5-8600 3.1GHZ Desktop Processor SR3X0

$50.00



Intel - Core i9-14900K 14th Gen 24-Core 32-Thread - 4.4GHz (6.0GHz Turbo) Soc... picture

Intel - Core i9-14900K 14th Gen 24-Core 32-Thread - 4.4GHz (6.0GHz Turbo) Soc...

$539.99



Intel Core i5-6500 Quad-Core Processor 3.2 GHz 6MB LGA1151 picture

Intel Core i5-6500 Quad-Core Processor 3.2 GHz 6MB LGA1151

$23.99



Intel - Core i7-14700K 14th Gen 20-Core 28-Thread - 4.3GHz (5.6GHz Turbo) Soc... picture

Intel - Core i7-14700K 14th Gen 20-Core 28-Thread - 4.3GHz (5.6GHz Turbo) Soc...

$399.99



Intel - Core i9-13900K 13th Gen 24 cores 8 P-cores + 16 E-cores 36M Cache, 3 ... picture

Intel - Core i9-13900K 13th Gen 24 cores 8 P-cores + 16 E-cores 36M Cache, 3 ...

$519.99



Intel Core i3-12100F Processor (4.3 GHz, 4 Cores, LGA 1700) Box - BX8071512100F picture

Intel Core i3-12100F Processor (4.3 GHz, 4 Cores, LGA 1700) Box - BX8071512100F

$83.50



AMD EPYC 7282 cpu processor 16 cores 32 threads 2.8GHZ up to 3.2GHZ 120w picture

AMD EPYC 7282 cpu processor 16 cores 32 threads 2.8GHZ up to 3.2GHZ 120w

$78.00